Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the sqlparse package are vulnerable to Denial of Service (DoS) due to missing hard limits on token grouping recursion depth and token processing when formatting very large SQL tuple lists. During sqlparse.format() processing, the sqlparse.engine.grouping._group_matching() and sqlparse.engine.grouping._group() functions can recurse and iterate over excessively large tlist.tokens without enforcing MAX_GROUPING_DEPTH or MAX_GROUPING_TOKENS, allowing grouping work to grow until it effectively hangs.

Affected versions of this package are vulnerable to Denial of Service (DoS) attacks due to Algorithmic Complexity. The SQL parser fails to enforce limits when processing deeply nested tuples and large token sequences, leading to excessive resource consumption through crafted SQL statements with extreme nesting depth or token counts.

**Note:** This issue is due to an incomplete fix for CVE-2024-4340.

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of the requests package are vulnerable to Insecure Temporary File reuse due to predictable temporary filename generation in extract_zipped_paths(). The requests.utils.extract_zipped_paths() utility extracts files from zip archives into the system temporary directory using a deterministic path, and if that file already exists, the function reuses it without validating that it is the expected extracted content.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of the requests package are vulnerable to Insecure Temporary File reuse due to predictable temporary filename generation in extract_zipped_paths(). The requests.utils.extract_zipped_paths() utility extracts files from zip archives into the system temporary directory using a deterministic path, and if that file already exists, the function reuses it without validating that it is the expected extracted content.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the sqlparse package are vulnerable to Denial of Service (DoS) due to missing hard limits on token grouping recursion depth and token processing when formatting very large SQL tuple lists. During sqlparse.format() processing, the sqlparse.engine.grouping._group_matching() and sqlparse.engine.grouping._group() functions can recurse and iterate over excessively large tlist.tokens without enforcing MAX_GROUPING_DEPTH or MAX_GROUPING_TOKENS, allowing grouping work to grow until it effectively hangs.

Affected versions of this package are vulnerable to Denial of Service (DoS) attacks due to Algorithmic Complexity. The SQL parser fails to enforce limits when processing deeply nested tuples and large token sequences, leading to excessive resource consumption through crafted SQL statements with extreme nesting depth or token counts.

**Note:** This issue is due to an incomplete fix for CVE-2024-4340.

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of the requests package are vulnerable to Insecure Temporary File reuse due to predictable temporary filename generation in extract_zipped_paths(). The requests.utils.extract_zipped_paths() utility extracts files from zip archives into the system temporary directory using a deterministic path, and if that file already exists, the function reuses it without validating that it is the expected extracted content.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of the requests package are vulnerable to Insecure Temporary File reuse due to predictable temporary filename generation in extract_zipped_paths(). The requests.utils.extract_zipped_paths() utility extracts files from zip archives into the system temporary directory using a deterministic path, and if that file already exists, the function reuses it without validating that it is the expected extracted content.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the sqlparse package are vulnerable to Denial of Service (DoS) due to missing hard limits on token grouping recursion depth and token processing when formatting very large SQL tuple lists. During sqlparse.format() processing, the sqlparse.engine.grouping._group_matching() and sqlparse.engine.grouping._group() functions can recurse and iterate over excessively large tlist.tokens without enforcing MAX_GROUPING_DEPTH or MAX_GROUPING_TOKENS, allowing grouping work to grow until it effectively hangs.

Affected versions of this package are vulnerable to Denial of Service (DoS) attacks due to Algorithmic Complexity. The SQL parser fails to enforce limits when processing deeply nested tuples and large token sequences, leading to excessive resource consumption through crafted SQL statements with extreme nesting depth or token counts.

**Note:** This issue is due to an incomplete fix for CVE-2024-4340.

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the sqlparse package are vulnerable to Denial of Service (DoS) due to missing hard limits on token grouping recursion depth and token processing when formatting very large SQL tuple lists. During sqlparse.format() processing, the sqlparse.engine.grouping._group_matching() and sqlparse.engine.grouping._group() functions can recurse and iterate over excessively large tlist.tokens without enforcing MAX_GROUPING_DEPTH or MAX_GROUPING_TOKENS, allowing grouping work to grow until it effectively hangs.

Affected versions of this package are vulnerable to Denial of Service (DoS) attacks due to Algorithmic Complexity. The SQL parser fails to enforce limits when processing deeply nested tuples and large token sequences, leading to excessive resource consumption through crafted SQL statements with extreme nesting depth or token counts.

**Note:** This issue is due to an incomplete fix for CVE-2024-4340.

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the sqlparse package are vulnerable to Denial of Service (DoS) due to missing hard limits on token grouping recursion depth and token processing when formatting very large SQL tuple lists. During sqlparse.format() processing, the sqlparse.engine.grouping._group_matching() and sqlparse.engine.grouping._group() functions can recurse and iterate over excessively large tlist.tokens without enforcing MAX_GROUPING_DEPTH or MAX_GROUPING_TOKENS, allowing grouping work to grow until it effectively hangs.

Affected versions of this package are vulnerable to Denial of Service (DoS) attacks due to Algorithmic Complexity. The SQL parser fails to enforce limits when processing deeply nested tuples and large token sequences, leading to excessive resource consumption through crafted SQL statements with extreme nesting depth or token counts.

**Note:** This issue is due to an incomplete fix for CVE-2024-4340.

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the sqlparse package are vulnerable to Denial of Service (DoS) due to missing hard limits on token grouping recursion depth and token processing when formatting very large SQL tuple lists. During sqlparse.format() processing, the sqlparse.engine.grouping._group_matching() and sqlparse.engine.grouping._group() functions can recurse and iterate over excessively large tlist.tokens without enforcing MAX_GROUPING_DEPTH or MAX_GROUPING_TOKENS, allowing grouping work to grow until it effectively hangs.

Affected versions of this package are vulnerable to Denial of Service (DoS) attacks due to Algorithmic Complexity. The SQL parser fails to enforce limits when processing deeply nested tuples and large token sequences, leading to excessive resource consumption through crafted SQL statements with extreme nesting depth or token counts.

**Note:** This issue is due to an incomplete fix for CVE-2024-4340.

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of the requests package are vulnerable to Insecure Temporary File reuse due to predictable temporary filename generation in extract_zipped_paths(). The requests.utils.extract_zipped_paths() utility extracts files from zip archives into the system temporary directory using a deterministic path, and if that file already exists, the function reuses it without validating that it is the expected extracted content.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of the requests package are vulnerable to Insecure Temporary File reuse due to predictable temporary filename generation in extract_zipped_paths(). The requests.utils.extract_zipped_paths() utility extracts files from zip archives into the system temporary directory using a deterministic path, and if that file already exists, the function reuses it without validating that it is the expected extracted content.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the sqlparse package are vulnerable to Denial of Service (DoS) due to missing hard limits on token grouping recursion depth and token processing when formatting very large SQL tuple lists. During sqlparse.format() processing, the sqlparse.engine.grouping._group_matching() and sqlparse.engine.grouping._group() functions can recurse and iterate over excessively large tlist.tokens without enforcing MAX_GROUPING_DEPTH or MAX_GROUPING_TOKENS, allowing grouping work to grow until it effectively hangs.

Affected versions of this package are vulnerable to Denial of Service (DoS) attacks due to Algorithmic Complexity. The SQL parser fails to enforce limits when processing deeply nested tuples and large token sequences, leading to excessive resource consumption through crafted SQL statements with extreme nesting depth or token counts.

**Note:** This issue is due to an incomplete fix for CVE-2024-4340.

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of the requests package are vulnerable to Insecure Temporary File reuse due to predictable temporary filename generation in extract_zipped_paths(). The requests.utils.extract_zipped_paths() utility extracts files from zip archives into the system temporary directory using a deterministic path, and if that file already exists, the function reuses it without validating that it is the expected extracted content.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of the requests package are vulnerable to Insecure Temporary File reuse due to predictable temporary filename generation in extract_zipped_paths(). The requests.utils.extract_zipped_paths() utility extracts files from zip archives into the system temporary directory using a deterministic path, and if that file already exists, the function reuses it without validating that it is the expected extracted content.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the sqlparse package are vulnerable to Denial of Service (DoS) due to missing hard limits on token grouping recursion depth and token processing when formatting very large SQL tuple lists. During sqlparse.format() processing, the sqlparse.engine.grouping._group_matching() and sqlparse.engine.grouping._group() functions can recurse and iterate over excessively large tlist.tokens without enforcing MAX_GROUPING_DEPTH or MAX_GROUPING_TOKENS, allowing grouping work to grow until it effectively hangs.

Affected versions of this package are vulnerable to Denial of Service (DoS) attacks due to Algorithmic Complexity. The SQL parser fails to enforce limits when processing deeply nested tuples and large token sequences, leading to excessive resource consumption through crafted SQL statements with extreme nesting depth or token counts.

**Note:** This issue is due to an incomplete fix for CVE-2024-4340.

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.