Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Affected versions of Setuptools are vulnerable to Path Traversal via PackageIndex.download(). The impact is Arbitrary File Overwrite: An attacker would be allowed to write files to arbitrary locations on the filesystem with the permissions of the process running the Python code, which could escalate to RCE depending on the context.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Affected versions of Setuptools are vulnerable to Path Traversal via PackageIndex.download(). The impact is Arbitrary File Overwrite: An attacker would be allowed to write files to arbitrary locations on the filesystem with the permissions of the process running the Python code, which could escalate to RCE depending on the context.

Affected versions of Setuptools are vulnerable to Path Traversal via PackageIndex.download(). The impact is Arbitrary File Overwrite: An attacker would be allowed to write files to arbitrary locations on the filesystem with the permissions of the process running the Python code, which could escalate to RCE depending on the context.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Affected versions of Setuptools are vulnerable to Path Traversal via PackageIndex.download(). The impact is Arbitrary File Overwrite: An attacker would be allowed to write files to arbitrary locations on the filesystem with the permissions of the process running the Python code, which could escalate to RCE depending on the context.

Affected versions of Setuptools are vulnerable to Path Traversal via PackageIndex.download(). The impact is Arbitrary File Overwrite: An attacker would be allowed to write files to arbitrary locations on the filesystem with the permissions of the process running the Python code, which could escalate to RCE depending on the context.

Affected versions of Setuptools are vulnerable to Path Traversal via PackageIndex.download(). The impact is Arbitrary File Overwrite: An attacker would be allowed to write files to arbitrary locations on the filesystem with the permissions of the process running the Python code, which could escalate to RCE depending on the context.

Affected versions of the pip package are vulnerable to Arbitrary File Overwrite due to improper validation of symbolic link targets in the fallback tar extraction code. In src/pip/_internal/utils/unpacking.py, the _untar_without_filter routine used when the Python tarfile module lacks PEP 706 (no tarfile.data_filter) extracted symlink members with tar._extract_member without verifying that link destinations resolve under the extraction root, a check later added via the is_symlink_target_in_tar helper.

Pip solves a security vulnerability that previously allowed maliciously crafted wheel files to execute unauthorized code during installation.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Affected versions of Setuptools are vulnerable to Path Traversal via PackageIndex.download(). The impact is Arbitrary File Overwrite: An attacker would be allowed to write files to arbitrary locations on the filesystem with the permissions of the process running the Python code, which could escalate to RCE depending on the context.

Affected versions of Setuptools are vulnerable to Path Traversal via PackageIndex.download(). The impact is Arbitrary File Overwrite: An attacker would be allowed to write files to arbitrary locations on the filesystem with the permissions of the process running the Python code, which could escalate to RCE depending on the context.

Affected versions of Setuptools are vulnerable to Path Traversal via PackageIndex.download(). The impact is Arbitrary File Overwrite: An attacker would be allowed to write files to arbitrary locations on the filesystem with the permissions of the process running the Python code, which could escalate to RCE depending on the context.

Affected versions of the pip package are vulnerable to Arbitrary File Overwrite due to improper validation of symbolic link targets in the fallback tar extraction code. In src/pip/_internal/utils/unpacking.py, the _untar_without_filter routine used when the Python tarfile module lacks PEP 706 (no tarfile.data_filter) extracted symlink members with tar._extract_member without verifying that link destinations resolve under the extraction root, a check later added via the is_symlink_target_in_tar helper.

Pip solves a security vulnerability that previously allowed maliciously crafted wheel files to execute unauthorized code during installation.

Affected versions of the pip package are vulnerable to Arbitrary File Overwrite due to improper validation of symbolic link targets in the fallback tar extraction code. In src/pip/_internal/utils/unpacking.py, the _untar_without_filter routine used when the Python tarfile module lacks PEP 706 (no tarfile.data_filter) extracted symlink members with tar._extract_member without verifying that link destinations resolve under the extraction root, a check later added via the is_symlink_target_in_tar helper.

Pip solves a security vulnerability that previously allowed maliciously crafted wheel files to execute unauthorized code during installation.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Affected versions of Setuptools are vulnerable to Path Traversal via PackageIndex.download(). The impact is Arbitrary File Overwrite: An attacker would be allowed to write files to arbitrary locations on the filesystem with the permissions of the process running the Python code, which could escalate to RCE depending on the context.

Affected versions of Setuptools are vulnerable to Path Traversal via PackageIndex.download(). The impact is Arbitrary File Overwrite: An attacker would be allowed to write files to arbitrary locations on the filesystem with the permissions of the process running the Python code, which could escalate to RCE depending on the context.

Affected versions of Setuptools are vulnerable to Path Traversal via PackageIndex.download(). The impact is Arbitrary File Overwrite: An attacker would be allowed to write files to arbitrary locations on the filesystem with the permissions of the process running the Python code, which could escalate to RCE depending on the context.

Affected versions of the pip package are vulnerable to Arbitrary File Overwrite due to improper validation of symbolic link targets in the fallback tar extraction code. In src/pip/_internal/utils/unpacking.py, the _untar_without_filter routine used when the Python tarfile module lacks PEP 706 (no tarfile.data_filter) extracted symlink members with tar._extract_member without verifying that link destinations resolve under the extraction root, a check later added via the is_symlink_target_in_tar helper.

Pip solves a security vulnerability that previously allowed maliciously crafted wheel files to execute unauthorized code during installation.

Affected versions of the pip package are vulnerable to Arbitrary File Overwrite due to improper validation of symbolic link targets in the fallback tar extraction code. In src/pip/_internal/utils/unpacking.py, the _untar_without_filter routine used when the Python tarfile module lacks PEP 706 (no tarfile.data_filter) extracted symlink members with tar._extract_member without verifying that link destinations resolve under the extraction root, a check later added via the is_symlink_target_in_tar helper.

Pip solves a security vulnerability that previously allowed maliciously crafted wheel files to execute unauthorized code during installation.

Affected versions of the pip package are vulnerable to Arbitrary File Overwrite due to improper validation of symbolic link targets in the fallback tar extraction code. In src/pip/_internal/utils/unpacking.py, the _untar_without_filter routine used when the Python tarfile module lacks PEP 706 (no tarfile.data_filter) extracted symlink members with tar._extract_member without verifying that link destinations resolve under the extraction root, a check later added via the is_symlink_target_in_tar helper.

Pip solves a security vulnerability that previously allowed maliciously crafted wheel files to execute unauthorized code during installation.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and before 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime, utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behaviour. This issue has been patched in version 2.5.0.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Certifi affected versions recognized root certificates from GLOBALTRUST. Certifi patch removes these root certificates from the root store. These certificates are being removed pursuant to an investigation that identified "long-running and unresolved compliance issues" and are also in the process of being removed from Mozilla's trust store.

Affected versions of Setuptools are vulnerable to Path Traversal via PackageIndex.download(). The impact is Arbitrary File Overwrite: An attacker would be allowed to write files to arbitrary locations on the filesystem with the permissions of the process running the Python code, which could escalate to RCE depending on the context.

Affected versions of Setuptools are vulnerable to Path Traversal via PackageIndex.download(). The impact is Arbitrary File Overwrite: An attacker would be allowed to write files to arbitrary locations on the filesystem with the permissions of the process running the Python code, which could escalate to RCE depending on the context.

Affected versions of Setuptools are vulnerable to Path Traversal via PackageIndex.download(). The impact is Arbitrary File Overwrite: An attacker would be allowed to write files to arbitrary locations on the filesystem with the permissions of the process running the Python code, which could escalate to RCE depending on the context.