Rsa 4.7 includes a fix for CVE-2020-25658: It was found that python-rsa is vulnerable to Bleichenbacher timing attacks. An attacker can use this flaw via the RSA decryption API to decrypt parts of the cipher text encrypted with RSA.

Rsa 4.3 includes a fix for CVE-2020-13757: Python-RSA before 4.3 ignores leading '\0' bytes during decryption of ciphertext. This could conceivably have a security-relevant impact, e.g., by helping an attacker to infer that an application uses Python-RSA, or if the length of accepted ciphertext affects application behavior (such as by causing excessive memory allocation).

Affected versions of this package are vulnerable to Insufficient Verification of Data Authenticity. The library does not validate the `crit` (Critical) Header Parameter as required by RFC 7515 §4.1.11 — when a JWT contains a `crit` array listing extensions that the library does not understand, the token is accepted instead of rejected. An attacker can exploit this vulnerability by crafting JWTs with unknown critical extensions (e.g., MFA requirements, token binding, scope restrictions) that are silently ignored, potentially bypassing security policies or causing split-brain verification in mixed-library deployments where other RFC-compliant libraries would reject the same token.

PyJWT 2.4.0 includes a fix for CVE-2022-29217: An attacker submitting the JWT token can choose the used signing algorithm. The PyJWT library requires that the application chooses what algorithms are supported. The application can specify 'jwt.algorithms.get_default_algorithms()' to get support for all algorithms, or specify a single algorithm. The issue is not that big as 'algorithms=jwt.algorithms.get_default_algorithms()' has to be used. As a workaround, always be explicit with the algorithms that are accepted and expected when decoding.

Affected versions of the pyasn1 package are vulnerable to Denial of Service (DoS) due to uncontrolled recursion when decoding deeply nested ASN.1 data. The vulnerability exists in the BER decoder’s indefLenValueDecoder, valueDecoder, and _decodeComponentsSchemaless code paths, where decodeFun is recursively invoked for nested SEQUENCE, SET, SEQUENCE OF, and SET OF elements without enforcing a recursion-depth limit.

Pyyaml version 5.4 includes a fix for CVE-2020-14343: A vulnerability was discovered in the PyYAML library in versions before 5.4, where it is susceptible to arbitrary code execution when it processes untrusted YAML files through the full_load method or with the FullLoader loader. Applications that use the library to process untrusted input may be vulnerable to this flaw. This flaw allows an attacker to execute arbitrary code on the system by abusing the python/object/new constructor. This flaw is due to an incomplete fix for CVE-2020-1747.
https://bugzilla.redhat.com/show_bug.cgi?id=1860466

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in inventory.
https://github.com/sphinx-doc/sphinx/issues/8175
https://github.com/sphinx-doc/sphinx/commit/f7b872e673f9b359a61fd287a7338a28077840d2

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in docstring.
https://github.com/sphinx-doc/sphinx/issues/8172
https://github.com/sphinx-doc/sphinx/commit/f00e75278c5999f40b214d8934357fbf0e705417

Affected versions of the sqlparse package are vulnerable to Denial of Service (DoS) due to missing hard limits on token grouping recursion depth and token processing when formatting very large SQL tuple lists. During sqlparse.format() processing, the sqlparse.engine.grouping._group_matching() and sqlparse.engine.grouping._group() functions can recurse and iterate over excessively large tlist.tokens without enforcing MAX_GROUPING_DEPTH or MAX_GROUPING_TOKENS, allowing grouping work to grow until it effectively hangs.

Affected versions of this package are vulnerable to Denial of Service (DoS) attacks due to Algorithmic Complexity. The SQL parser fails to enforce limits when processing deeply nested tuples and large token sequences, leading to excessive resource consumption through crafted SQL statements with extreme nesting depth or token counts.

**Note:** This issue is due to an incomplete fix for CVE-2024-4340.

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

Sqlparse 0.4.4 includes a fix for CVE-2023-30608: Parser contains a regular expression that is vulnerable to ReDOS (Regular Expression Denial of Service).
https://github.com/andialbrecht/sqlparse/security/advisories/GHSA-rrm6-wvj7-cwh2

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

Affected versions of the urllib3 package are vulnerable to Information Disclosure due to improper handling of sensitive headers during cross-origin redirects in the low-level proxy API. When following cross-origin redirects via ProxyManager.connection_from_url().urlopen() with assert_same_host=False, sensitive headers including Authorization, Cookie, and Proxy-Authorization are not stripped, unlike the high-level API, which removes them via Retry.DEFAULT_REMOVE_HEADERS_ON_REDIRECT. An attacker controlling a redirect target can capture these sensitive headers from requests that follow cross-origin redirects through the low-level proxy API path.

Urllib3 1.25.9 includes a fix for CVE-2020-26137: Urllib3 before 1.25.9 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of putrequest(). NOTE: this is similar to CVE-2020-26116.
https://github.com/python/cpython/issues/83784
https://github.com/urllib3/urllib3/pull/1800

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of urllib3 are vulnerable to an HTTP redirect handling vulnerability that fails to remove the HTTP request body when a POST changes to a GET via 301, 302, or 303 responses. This flaw can expose sensitive request data if the origin service is compromised and redirects to a malicious endpoint, though exploitability is low when no sensitive data is used. The vulnerability affects automatic redirect behavior. It is fixed in versions 1.26.18 and 2.0.7; update or disable redirects using redirects=False.
This vulnerability is specific to Python's urllib3 library.

Urllib3 1.26.17 and 2.0.5 include a fix for CVE-2023-43804: Urllib3 doesn't treat the 'Cookie' HTTP header special or provide any helpers for managing cookies over HTTP, that is the responsibility of the user. However, it is possible for a user to specify a 'Cookie' header and unknowingly leak information via HTTP redirects to a different origin if that user doesn't disable redirects explicitly.
https://github.com/urllib3/urllib3/security/advisories/GHSA-v845-jxx5-vc9f

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 1.26.5 includes a fix for CVE-2021-33503: When provided with a URL containing many @ characters in the authority component, the authority regular expression exhibits catastrophic backtracking, causing a denial of service if a URL were passed as a parameter or redirected to via an HTTP redirect.
https://github.com/advisories/GHSA-q2q7-5pp4-w6pg

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Ipython versions 8.0.1, 7.31.1, 7.16.3 and 5.11 include a fix for CVE-2022-21699: Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine.
https://github.com/ipython/ipython/security/advisories/GHSA-pq7m-3gw7-gq5x

IPython 8.10.0 includes a fix for CVE-2023-24816: Versions prior to 8.10.0 are subject to a command injection vulnerability with very specific prerequisites. This vulnerability requires that the function 'IPython.utils.terminal.set_term_title' be called on Windows in a Python environment where ctypes is not available. The dependency on 'ctypes' in 'IPython.utils._process_win32' prevents the vulnerable code from ever being reached in the ipython binary. However, as a library that could be used by another tool 'set_term_title' could be called and hence introduce a vulnerability. If an attacker get untrusted input to an instance of this function they would be able to inject shell commands as current process and limited to the scope of the current process. As a workaround, users should ensure that any calls to the 'IPython.utils.terminal.set_term_title' function are done with trusted or filtered input.
https://github.com/ipython/ipython/security/advisories/GHSA-29gw-9793-fvw7

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of the Werkzeug package are vulnerable to Denial of Service (DoS) due to improper handling of Windows special device names in the safe_join function. In Werkzeug versions before 3.1.4, safe_join permits path segments such as “CON” or “AUX” to pass validation, allowing send_from_directory to construct a path that resolves to a Windows device file, which opens successfully but then blocks indefinitely when read.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of the Werkzeug package are vulnerable to Denial of Service (DoS) due to improper handling of Windows special device names in path joining logic. The safe_join() function fails to reject device-name path segments when they are preceded by other segments (for example, example/NUL), and send_from_directory() relies on safe_join() when resolving user-supplied file paths.

Affected versions of the Werkzeug package are vulnerable to Improper Handling of Windows Device Names due to incomplete validation of Windows reserved device names in user-controlled path segments. In werkzeug.security.safe_join, path components ending with special device names (for example CON or AUX) are not reliably rejected when they include compound extensions (for example CON.txt.html) or trailing spaces, and werkzeug.utils.send_from_directory relies on safe_join when resolving a requested filename.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Affected versions of the requests package are vulnerable to Insecure Temporary File reuse due to predictable temporary filename generation in extract_zipped_paths(). The requests.utils.extract_zipped_paths() utility extracts files from zip archives into the system temporary directory using a deterministic path, and if that file already exists, the function reuses it without validating that it is the expected extracted content.

Affected versions of Requests are vulnerable to proxy credential leakage. When redirected to an HTTPS endpoint, the Proxy-Authorization header is forwarded to the destination server due to the use of rebuild_proxies to reattach the header. This may allow a malicious actor to exfiltrate sensitive information.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Sentry-sdk 1.4.1 includes a fix for a Race Condition vulnerability.
https://github.com/getsentry/sentry-python/pull/1203

Sentry-sdk 1.14.0 includes a fix for CVE-2023-28117: When using the Django integration of versions prior to 1.14.0 of the Sentry SDK in a specific configuration it is possible to leak sensitive cookies values, including the session cookie to Sentry. These sensitive cookies could then be used by someone with access to your Sentry issues to impersonate or escalate their privileges within your application. In order for these sensitive values to be leaked, the Sentry SDK configuration must have 'sendDefaultPII' set to 'True'; one must use a custom name for either 'SESSION_COOKIE_NAME' or 'CSRF_COOKIE_NAME' in one's Django settings; and one must not be configured in one's organization or project settings to use Sentry's data scrubbing features to account for the custom cookie names. As of version 1.14.0, the Django integration of the 'sentry-sdk' will detect the custom cookie names based on one's Django settings and will remove the values from the payload before sending the data to Sentry. As a workaround, use the SDK's filtering mechanism to remove the cookies from the payload that is sent to Sentry. For error events, this can be done with the 'before_send' callback method and for performance related events (transactions) one can use the 'before_send_transaction' callback method. Those who want to handle filtering of these values on the server-side can also use Sentry's advanced data scrubbing feature to account for the custom cookie names. Look for the '$http.cookies', '$http.headers', '$request.cookies', or '$request.headers' fields to target with a scrubbing rule.
https://github.com/getsentry/sentry-python/security/advisories/GHSA-29pr-6jr8-q5jm

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

A SQL Injection issue in the SQL Panel in Jazzband Django Debug Toolbar before 1.11.1, 2.x before 2.2.1, and 3.x before 3.2.1 allows attackers to execute SQL statements by changing the raw_sql input field of the SQL explain, analyze, or select form. See CVE-2021-30459.

Python Social Auth is a social authentication/registration mechanism. Prior to version 5.4.1, due to default case-insensitive collation in MySQL or MariaDB databases, third-party authentication user IDs are not case-sensitive and could cause different IDs to match. This issue has been addressed by a fix released in version 5.4.1. An immediate workaround would be to change collation of the affected field. See CVE-2024-32879.

Affected versions of the social-auth-app-django package are vulnerable to Authentication Bypass due to unintended email-based account association during the authentication pipeline. In social_django.storage.create_user (invoked by social_core.pipeline.user.create_user), an IntegrityError during user creation triggers a fallback that returns an existing User looked up by e-mail, effectively performing social_core.pipeline.social_auth.associate_by_email even when that step is disabled.

Rsa 4.7 includes a fix for CVE-2020-25658: It was found that python-rsa is vulnerable to Bleichenbacher timing attacks. An attacker can use this flaw via the RSA decryption API to decrypt parts of the cipher text encrypted with RSA.

Rsa 4.3 includes a fix for CVE-2020-13757: Python-RSA before 4.3 ignores leading '\0' bytes during decryption of ciphertext. This could conceivably have a security-relevant impact, e.g., by helping an attacker to infer that an application uses Python-RSA, or if the length of accepted ciphertext affects application behavior (such as by causing excessive memory allocation).

Affected versions of Idna are vulnerable to Denial Of Service via the idna.encode(), where a specially crafted argument could lead to significant resource consumption. In version 3.7, this function has been updated to reject such inputs efficiently, minimizing resource use. A practical workaround involves enforcing a maximum domain name length of 253 characters before encoding, as the vulnerability is triggered by unusually large inputs that normal operations wouldn't encounter.

Affected versions of the idna package are vulnerable to Denial of Service due to an incomplete fix for CVE-2024-3651 that still allows specially crafted inputs to consume significant resources during encoding. The idna.encode() function invokes the valid_contexto validator on every label before applying length-based rejection, so payloads such as long repetitions of the Arabic-Indic digit U+0660 or sequences of the Katakana middle dot U+30FB followed by a CJK character cause valid_contexto to perform extensive context-rule processing across each character. A remote attacker who can supply domain-name input to an application that calls idna.encode() without first enforcing the 253-character DNS length limit can submit arbitrarily large strings that drive the validator to exhaust CPU time, resulting in Denial of Service through resource consumption.

Kombu 5.2.1 updates Amazon sqs dependency 'urllib3' minimum version to 1.26.7 to include security fixes.
https://github.com/celery/kombu/commit/f3b04558fa0df4ecc383c93e0b3b300d95e17c47

Affected versions of this package are vulnerable to Insufficient Verification of Data Authenticity. The library does not validate the `crit` (Critical) Header Parameter as required by RFC 7515 §4.1.11 — when a JWT contains a `crit` array listing extensions that the library does not understand, the token is accepted instead of rejected. An attacker can exploit this vulnerability by crafting JWTs with unknown critical extensions (e.g., MFA requirements, token binding, scope restrictions) that are silently ignored, potentially bypassing security policies or causing split-brain verification in mixed-library deployments where other RFC-compliant libraries would reject the same token.

PyJWT 2.4.0 includes a fix for CVE-2022-29217: An attacker submitting the JWT token can choose the used signing algorithm. The PyJWT library requires that the application chooses what algorithms are supported. The application can specify 'jwt.algorithms.get_default_algorithms()' to get support for all algorithms, or specify a single algorithm. The issue is not that big as 'algorithms=jwt.algorithms.get_default_algorithms()' has to be used. As a workaround, always be explicit with the algorithms that are accepted and expected when decoding.

Affected versions of the pillow package are vulnerable to Integer Overflow due to unchecked accumulation of glyph advance values while tracking the current rendering position during font processing. When a font supplies an excessively large advance for each glyph, the running position counter wraps around because the arithmetic is performed in a fixed-width integer type that cannot represent the resulting magnitude. A remote attacker who can supply a crafted font file to a target that uses Pillow's font rendering can trigger the overflow, leading to incorrect memory calculations and potential memory corruption.

Affected versions of the pillow package are vulnerable to Denial of Service due to an unbounded loop when traversing PDF cross-reference trailer chains without cycle detection. The PdfParser module follows Prev pointers in PDF trailers to read cross-reference sections, but it does not track previously processed offsets, so a trailer whose Prev pointer references its own offset or forms a longer cycle causes the parser to loop indefinitely. A remote attacker who supplies a crafted PDF document can cause the parsing process to hang, consuming 100% CPU and rendering the consuming application unresponsive.

Pillow 10.0.0 includes a fix for CVE-2023-44271: Denial of Service that uncontrollably allocates memory to process a given task, potentially causing a service to crash by having it run out of memory. This occurs for truetype in ImageFont when textlength in an ImageDraw instance operates on a long text argument.
https://github.com/python-pillow/Pillow/pull/7244

Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICO container, and thus an attempted memory allocation can be very large.

Pillow 10.3.0 introduces a security update addressing CVE-2024-28219 by replacing certain functions with strncpy to prevent buffer overflow issues.

Pillow 8.1.1 includes a fix for CVE-2021-25289: TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files because of certain interpretation conflicts with LibTIFF in RGBA mode. NOTE: this issue exists because of an incomplete fix for CVE-2020-35654.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow version 8.2.0 includes a fix for CVE-2021-28677: For EPS data, the readline implementation used in EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28677-fix-eps-dos-on-open

In libImaging/PcxDecode.c in Pillow before 7.1.0, an out-of-bounds read can occur when reading PCX files where state->shuffle is instructed to read beyond state->buffer.

Pillow 8.1.0 includes a fix for SGI Decode buffer overrun. CVE-2020-35655 #5173.

Pillow 8.1.0 fixes TIFF OOB Write error. CVE-2020-35654 #5175.

Pillow 8.3.0 includes a fix for CVE-2021-34552: Pillow through 8.2.0 and PIL (also known as Python Imaging Library) through 1.1.7 allow an attacker to pass controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.0.html#buffer-overflow
https://pillow.readthedocs.io/en/stable/releasenotes/index.html

Pillow 9.0.0 includes a fix for CVE-2022-22816: path_getbbox in path.c in Pillow before 9.0.0 has a buffer over-read during initialization of ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow version 8.2.0 includes a fix for CVE-2021-28676: For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28676-fix-fli-dos

Pillow 9.0.1 includes a fix for CVE-2022-22817: PIL.ImageMath.eval in Pillow before 9.0.0 allows evaluation of arbitrary expressions, such as ones that use the Python exec method. A first patch was issued for version 9.0.0 but it did not prevent builtins available to lambda expressions.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.1.html#security

Pillow 9.0.0 includes a fix for CVE-2022-22815: path_getbbox in path.c in Pillow before 9.0.0 improperly initializes ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow before 7.1.0 has multiple out-of-bounds reads in libImaging/FliDecode.c.

In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a number of out-of-bounds reads exist in the parsing of SGI image files, a different issue than CVE-2020-5311.

In Pillow before 7.1.0, there are two Buffer Overflows in libImaging/TiffDecode.c.

Pillow 8.2.0 includes a fix for CVE-2021-25288: There is an out-of-bounds read in J2kDecode, in j2ku_gray_i.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

Pillow 8.1.1 includes a fix for CVE-2021-25292: The PDF parser allows a regular expression DoS (ReDoS) attack via a crafted PDF file because of a catastrophic backtracking regex.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow before 9.0.1 allows attackers to delete files because spaces in temporary pathnames are mishandled.

Pillow 9.0.0 excludes carriage return in PDF regex to help prevent ReDoS.
https://github.com/python-pillow/Pillow/pull/5912
https://github.com/python-pillow/Pillow/commit/43b800d933c996226e4d7df00c33fcbe46d97363

Pillow 10.0.1 updates its C dependency 'libwebp' to 1.3.2 to include a fix for a high-risk vulnerability.
https://pillow.readthedocs.io/en/stable/releasenotes/10.0.1.html

Pillow 8.1.1 includes a fix for CVE-2021-25293: There is an out-of-bounds read in SGIRleDecode.c.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0, there are multiple out-of-bounds reads via a crafted JP2 file.

In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the user-supplied stride value is trusted for buffer calculations.

Pillow 8.1.1 includes a fix for CVE-2021-27921: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for a BLP container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the number of input layers relative to the size of the data block. This could lead to a DoS on Image.open prior to Image.load.

Pillow is affected by an arbitrary code execution vulnerability. If an attacker has control over the keys passed to the environment argument of PIL.ImageMath.eval(), they may be able to execute arbitrary code.
https://pillow.readthedocs.io/en/stable/releasenotes/10.2.0.html

Pillow from 5.2.0 and before 8.3.2 is vulnerable to Regular Expression Denial of Service (ReDoS) via the getrgb function.
https://github.com/python-pillow/Pillow/commit/9e08eb8f78fdfd2f476e1b20b7cf38683754866b
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.2.html

Pillow 8.1.1 includes a fix for CVE-2021-25291: In TiffDecode.c, there is an out-of-bounds read in TiffreadRGBATile via invalid tile boundaries.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-25290: In TiffDecode.c, there is a negative-offset memcpy with an invalid size.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.0.1 updates 'FreeType' used in binary wheels to v2.10.4 to include a security fix.

Pillow 9.0.0 ensures JpegImagePlugin stops at the end of a truncated file to avoid Denial of Service attacks.
https://github.com/python-pillow/Pillow/pull/5921
https://github.com/advisories/GHSA-4fx9-vc88-q2xc

Pillow is potentially vulnerable to DoS attacks through PIL.ImageFont.ImageFont.getmask(). A decompression bomb check has also been added to the affected function.

Pillow before 9.2.0 performs Improper Handling of Highly Compressed GIF Data (Data Amplification).

Pillow 8.2.0 includes a fix for CVE-2021-25287: There is an out-of-bounds read in J2kDecode, in j2ku_graya_la.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

Pillow version 8.2.0 includes a fix for CVE-2021-28678: For BLP data, BlpImagePlugin did not properly check that reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be run a large number of times on empty data.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28678-fix-blp-dos

Pillow 8.1.1 includes a fix for CVE-2021-27922: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICNS container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Affected versions of the pyasn1 package are vulnerable to Denial of Service (DoS) due to uncontrolled recursion when decoding deeply nested ASN.1 data. The vulnerability exists in the BER decoder’s indefLenValueDecoder, valueDecoder, and _decodeComponentsSchemaless code paths, where decodeFun is recursively invoked for nested SEQUENCE, SET, SEQUENCE OF, and SET OF elements without enforcing a recursion-depth limit.

Pyyaml version 5.4 includes a fix for CVE-2020-14343: A vulnerability was discovered in the PyYAML library in versions before 5.4, where it is susceptible to arbitrary code execution when it processes untrusted YAML files through the full_load method or with the FullLoader loader. Applications that use the library to process untrusted input may be vulnerable to this flaw. This flaw allows an attacker to execute arbitrary code on the system by abusing the python/object/new constructor. This flaw is due to an incomplete fix for CVE-2020-1747.
https://bugzilla.redhat.com/show_bug.cgi?id=1860466

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in inventory.
https://github.com/sphinx-doc/sphinx/issues/8175
https://github.com/sphinx-doc/sphinx/commit/f7b872e673f9b359a61fd287a7338a28077840d2

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in docstring.
https://github.com/sphinx-doc/sphinx/issues/8172
https://github.com/sphinx-doc/sphinx/commit/f00e75278c5999f40b214d8934357fbf0e705417

Affected versions of the sqlparse package are vulnerable to Denial of Service (DoS) due to missing hard limits on token grouping recursion depth and token processing when formatting very large SQL tuple lists. During sqlparse.format() processing, the sqlparse.engine.grouping._group_matching() and sqlparse.engine.grouping._group() functions can recurse and iterate over excessively large tlist.tokens without enforcing MAX_GROUPING_DEPTH or MAX_GROUPING_TOKENS, allowing grouping work to grow until it effectively hangs.

Affected versions of this package are vulnerable to Denial of Service (DoS) attacks due to Algorithmic Complexity. The SQL parser fails to enforce limits when processing deeply nested tuples and large token sequences, leading to excessive resource consumption through crafted SQL statements with extreme nesting depth or token counts.

**Note:** This issue is due to an incomplete fix for CVE-2024-4340.

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

Sqlparse 0.4.4 includes a fix for CVE-2023-30608: Parser contains a regular expression that is vulnerable to ReDOS (Regular Expression Denial of Service).
https://github.com/andialbrecht/sqlparse/security/advisories/GHSA-rrm6-wvj7-cwh2

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

Affected versions of the urllib3 package are vulnerable to Information Disclosure due to improper handling of sensitive headers during cross-origin redirects in the low-level proxy API. When following cross-origin redirects via ProxyManager.connection_from_url().urlopen() with assert_same_host=False, sensitive headers including Authorization, Cookie, and Proxy-Authorization are not stripped, unlike the high-level API, which removes them via Retry.DEFAULT_REMOVE_HEADERS_ON_REDIRECT. An attacker controlling a redirect target can capture these sensitive headers from requests that follow cross-origin redirects through the low-level proxy API path.

Urllib3 1.25.9 includes a fix for CVE-2020-26137: Urllib3 before 1.25.9 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of putrequest(). NOTE: this is similar to CVE-2020-26116.
https://github.com/python/cpython/issues/83784
https://github.com/urllib3/urllib3/pull/1800

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of urllib3 are vulnerable to an HTTP redirect handling vulnerability that fails to remove the HTTP request body when a POST changes to a GET via 301, 302, or 303 responses. This flaw can expose sensitive request data if the origin service is compromised and redirects to a malicious endpoint, though exploitability is low when no sensitive data is used. The vulnerability affects automatic redirect behavior. It is fixed in versions 1.26.18 and 2.0.7; update or disable redirects using redirects=False.
This vulnerability is specific to Python's urllib3 library.

Urllib3 1.26.17 and 2.0.5 include a fix for CVE-2023-43804: Urllib3 doesn't treat the 'Cookie' HTTP header special or provide any helpers for managing cookies over HTTP, that is the responsibility of the user. However, it is possible for a user to specify a 'Cookie' header and unknowingly leak information via HTTP redirects to a different origin if that user doesn't disable redirects explicitly.
https://github.com/urllib3/urllib3/security/advisories/GHSA-v845-jxx5-vc9f

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 1.26.5 includes a fix for CVE-2021-33503: When provided with a URL containing many @ characters in the authority component, the authority regular expression exhibits catastrophic backtracking, causing a denial of service if a URL were passed as a parameter or redirected to via an HTTP redirect.
https://github.com/advisories/GHSA-q2q7-5pp4-w6pg

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Ipython versions 8.0.1, 7.31.1, 7.16.3 and 5.11 include a fix for CVE-2022-21699: Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine.
https://github.com/ipython/ipython/security/advisories/GHSA-pq7m-3gw7-gq5x

IPython 8.10.0 includes a fix for CVE-2023-24816: Versions prior to 8.10.0 are subject to a command injection vulnerability with very specific prerequisites. This vulnerability requires that the function 'IPython.utils.terminal.set_term_title' be called on Windows in a Python environment where ctypes is not available. The dependency on 'ctypes' in 'IPython.utils._process_win32' prevents the vulnerable code from ever being reached in the ipython binary. However, as a library that could be used by another tool 'set_term_title' could be called and hence introduce a vulnerability. If an attacker get untrusted input to an instance of this function they would be able to inject shell commands as current process and limited to the scope of the current process. As a workaround, users should ensure that any calls to the 'IPython.utils.terminal.set_term_title' function are done with trusted or filtered input.
https://github.com/ipython/ipython/security/advisories/GHSA-29gw-9793-fvw7

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of the Werkzeug package are vulnerable to Denial of Service (DoS) due to improper handling of Windows special device names in the safe_join function. In Werkzeug versions before 3.1.4, safe_join permits path segments such as “CON” or “AUX” to pass validation, allowing send_from_directory to construct a path that resolves to a Windows device file, which opens successfully but then blocks indefinitely when read.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of the Werkzeug package are vulnerable to Denial of Service (DoS) due to improper handling of Windows special device names in path joining logic. The safe_join() function fails to reject device-name path segments when they are preceded by other segments (for example, example/NUL), and send_from_directory() relies on safe_join() when resolving user-supplied file paths.

Affected versions of the Werkzeug package are vulnerable to Improper Handling of Windows Device Names due to incomplete validation of Windows reserved device names in user-controlled path segments. In werkzeug.security.safe_join, path components ending with special device names (for example CON or AUX) are not reliably rejected when they include compound extensions (for example CON.txt.html) or trailing spaces, and werkzeug.utils.send_from_directory relies on safe_join when resolving a requested filename.

Affected versions of the gunicorn package are vulnerable to HTTP Request/Response Smuggling due to improper validation of the Transfer-Encoding header that enables a TE.CL desynchronisation condition. Gunicorn’s HTTP parser does not consistently enforce RFC semantics when parsing conflicting or unsupported request framing—such as messages containing both Transfer-Encoding and Content-Length—so the backend may fall back to Content-Length while an intermediary treats the message as chunked.

Gunicorn fails to properly validate Transfer-Encoding headers, leading to HTTP Request Smuggling (HRS) vulnerabilities. By crafting requests with conflicting Transfer-Encoding headers, attackers can bypass security restrictions and access restricted endpoints. This issue is due to Gunicorn's handling of Transfer-Encoding headers, where it incorrectly processes requests with multiple, conflicting Transfer-Encoding headers, treating them as chunked regardless of the final encoding specified. This vulnerability allows for a range of attacks including cache poisoning, session manipulation, and data exposure.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Affected versions of the requests package are vulnerable to Insecure Temporary File reuse due to predictable temporary filename generation in extract_zipped_paths(). The requests.utils.extract_zipped_paths() utility extracts files from zip archives into the system temporary directory using a deterministic path, and if that file already exists, the function reuses it without validating that it is the expected extracted content.

Affected versions of Requests are vulnerable to proxy credential leakage. When redirected to an HTTPS endpoint, the Proxy-Authorization header is forwarded to the destination server due to the use of rebuild_proxies to reattach the header. This may allow a malicious actor to exfiltrate sensitive information.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Sentry-sdk 1.4.1 includes a fix for a Race Condition vulnerability.
https://github.com/getsentry/sentry-python/pull/1203

Sentry-sdk 1.14.0 includes a fix for CVE-2023-28117: When using the Django integration of versions prior to 1.14.0 of the Sentry SDK in a specific configuration it is possible to leak sensitive cookies values, including the session cookie to Sentry. These sensitive cookies could then be used by someone with access to your Sentry issues to impersonate or escalate their privileges within your application. In order for these sensitive values to be leaked, the Sentry SDK configuration must have 'sendDefaultPII' set to 'True'; one must use a custom name for either 'SESSION_COOKIE_NAME' or 'CSRF_COOKIE_NAME' in one's Django settings; and one must not be configured in one's organization or project settings to use Sentry's data scrubbing features to account for the custom cookie names. As of version 1.14.0, the Django integration of the 'sentry-sdk' will detect the custom cookie names based on one's Django settings and will remove the values from the payload before sending the data to Sentry. As a workaround, use the SDK's filtering mechanism to remove the cookies from the payload that is sent to Sentry. For error events, this can be done with the 'before_send' callback method and for performance related events (transactions) one can use the 'before_send_transaction' callback method. Those who want to handle filtering of these values on the server-side can also use Sentry's advanced data scrubbing feature to account for the custom cookie names. Look for the '$http.cookies', '$http.headers', '$request.cookies', or '$request.headers' fields to target with a scrubbing rule.
https://github.com/getsentry/sentry-python/security/advisories/GHSA-29pr-6jr8-q5jm

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

Django-filter 2.4.0 includes a fix for CVE-2020-15225: In django-filter before version 2.4.0, automatically generated 'NumberFilter' instances, whose value was later converted to an integer, were subject to potential DoS from maliciously input using exponential format with sufficiently large exponents. Version 2.4.0+ applies a 'MaxValueValidator' with a a default 'limit_value' of 1e50 to the form field used by 'NumberFilter' instances. In addition, 'NumberFilter' implements the new 'get_max_validator()' which should return a configured validator instance to customise the limit, or else 'None' to disable the additional validation. Users may manually apply an equivalent validator if they are not able to upgrade.
https://github.com/carltongibson/django-filter/security/advisories/GHSA-x7gm-rfgv-w973

A SQL Injection issue in the SQL Panel in Jazzband Django Debug Toolbar before 1.11.1, 2.x before 2.2.1, and 3.x before 3.2.1 allows attackers to execute SQL statements by changing the raw_sql input field of the SQL explain, analyze, or select form. See CVE-2021-30459.

A flaw was found in Django REST Framework versions before 3.12.0 and before 3.11.2. When using the browseable API viewer, Django REST Framework fails to properly escape certain strings that can come from user input. This allows a user who can control those strings to inject malicious <script> tags, leading to a cross-site-scripting (XSS) vulnerability.

Affected versions of the package djangorestframework are vulnerable to Cross-site Scripting (XSS) via the break_long_headers template filter due to improper input sanitization before splitting and joining with <br> tags.

Django-celery-results through 1.2.1 stores task results in the database. Among the data it stores are the variables passed into the tasks. The variables may contain sensitive cleartext information that does not belong unencrypted in the database. See CVE-2020-17495.

Python Social Auth is a social authentication/registration mechanism. Prior to version 5.4.1, due to default case-insensitive collation in MySQL or MariaDB databases, third-party authentication user IDs are not case-sensitive and could cause different IDs to match. This issue has been addressed by a fix released in version 5.4.1. An immediate workaround would be to change collation of the affected field. See CVE-2024-32879.

Affected versions of the social-auth-app-django package are vulnerable to Authentication Bypass due to unintended email-based account association during the authentication pipeline. In social_django.storage.create_user (invoked by social_core.pipeline.user.create_user), an IntegrityError during user creation triggers a fallback that returns an existing User looked up by e-mail, effectively performing social_core.pipeline.social_auth.associate_by_email even when that step is disabled.

Rsa 4.7 includes a fix for CVE-2020-25658: It was found that python-rsa is vulnerable to Bleichenbacher timing attacks. An attacker can use this flaw via the RSA decryption API to decrypt parts of the cipher text encrypted with RSA.

Rsa 4.3 includes a fix for CVE-2020-13757: Python-RSA before 4.3 ignores leading '\0' bytes during decryption of ciphertext. This could conceivably have a security-relevant impact, e.g., by helping an attacker to infer that an application uses Python-RSA, or if the length of accepted ciphertext affects application behavior (such as by causing excessive memory allocation).

Affected versions of Idna are vulnerable to Denial Of Service via the idna.encode(), where a specially crafted argument could lead to significant resource consumption. In version 3.7, this function has been updated to reject such inputs efficiently, minimizing resource use. A practical workaround involves enforcing a maximum domain name length of 253 characters before encoding, as the vulnerability is triggered by unusually large inputs that normal operations wouldn't encounter.

Affected versions of the idna package are vulnerable to Denial of Service due to an incomplete fix for CVE-2024-3651 that still allows specially crafted inputs to consume significant resources during encoding. The idna.encode() function invokes the valid_contexto validator on every label before applying length-based rejection, so payloads such as long repetitions of the Arabic-Indic digit U+0660 or sequences of the Katakana middle dot U+30FB followed by a CJK character cause valid_contexto to perform extensive context-rule processing across each character. A remote attacker who can supply domain-name input to an application that calls idna.encode() without first enforcing the 253-character DNS length limit can submit arbitrarily large strings that drive the validator to exhaust CPU time, resulting in Denial of Service through resource consumption.

Kombu 5.2.1 updates Amazon sqs dependency 'urllib3' minimum version to 1.26.7 to include security fixes.
https://github.com/celery/kombu/commit/f3b04558fa0df4ecc383c93e0b3b300d95e17c47

Affected versions of this package are vulnerable to Insufficient Verification of Data Authenticity. The library does not validate the `crit` (Critical) Header Parameter as required by RFC 7515 §4.1.11 — when a JWT contains a `crit` array listing extensions that the library does not understand, the token is accepted instead of rejected. An attacker can exploit this vulnerability by crafting JWTs with unknown critical extensions (e.g., MFA requirements, token binding, scope restrictions) that are silently ignored, potentially bypassing security policies or causing split-brain verification in mixed-library deployments where other RFC-compliant libraries would reject the same token.

PyJWT 2.4.0 includes a fix for CVE-2022-29217: An attacker submitting the JWT token can choose the used signing algorithm. The PyJWT library requires that the application chooses what algorithms are supported. The application can specify 'jwt.algorithms.get_default_algorithms()' to get support for all algorithms, or specify a single algorithm. The issue is not that big as 'algorithms=jwt.algorithms.get_default_algorithms()' has to be used. As a workaround, always be explicit with the algorithms that are accepted and expected when decoding.

An issue was discovered in Django 4.2 before 4.2.21, 5.1 before 5.1.9, and 5.2 before 5.2.1. The django.utils.html.strip_tags() function is vulnerable to a potential denial-of-service (slow performance) when processing inputs containing large sequences of incomplete HTML tags. The template filter striptags is also vulnerable, because it is built on top of strip_tags().

A potential denial-of-service vulnerability has been identified in Django's urlize() and urlizetrunc() functions in django.utils.html. This vulnerability can be triggered by inputting huge strings containing a specific sequence of characters.

Affected versions of the Django package are vulnerable to Denial of Service (DoS) due to inefficient string concatenation when processing duplicate HTTP headers in ASGI mode. The ASGIRequest class combines repeated headers using repeated string concatenation, resulting in super-linear (quadratic) time complexity when processing requests with many duplicate headers.

Django 2.2.26, 3.2.11 and 4.0.1 include a fix for CVE-2021-45452: Storage.save in Django 2.2 before 2.2.26, 3.2 before 3.2.11, and 4.0 before 4.0.1 allows directory traversal if crafted filenames are directly passed to it.
https://www.djangoproject.com/weblog/2022/jan/04/security-releases/

An issue was discovered in Django 2.2 before 2.2.13 and 3.0 before 3.0.7. In cases where a memcached backend does not perform key validation, passing malformed cache keys could result in a key collision, and potential data leakage.

Affected versions of Django are vulnerable to Denial-of-Service via django.utils.text.Truncator. The django.utils.text.Truncator chars() and words() methods (when used with html=True) are subject to a potential DoS (denial of service) attack via certain inputs with very long, potentially malformed HTML text. The chars() and words() methods are used to implement the truncatechars_html and truncatewords_html template filters, which are thus also vulnerable. NOTE: this issue exists because of an incomplete fix for CVE-2019-14232.

Django 2.2.16, 3.0.10 and 3.1.1 include a fix for CVE-2020-24583: An issue was discovered in Django 2.2 before 2.2.16, 3.0 before 3.0.10, and 3.1 before 3.1.1 (when Python 3.7+ is used). FILE_UPLOAD_DIRECTORY_PERMISSIONS mode was not applied to intermediate-level directories created in the process of uploading files. It was also not applied to intermediate-level collected static directories when using the collectstatic management command.
#NOTE: This vulnerability affects only users of Python versions above 3.7.
https://www.djangoproject.com/weblog/2020/sep/01/security-releases

Affected versions of Django are vulnerable to potential regular expression denial-of-service (REDoS). django.utils.text.Truncator.words() method (with html=True) and truncatewords_html template filter were subject to a potential regular expression denial-of-service attack using a suitably crafted string (follow up to CVE-2019-14232 and CVE-2023-43665).

Affected versions of Django are affected by a potential denial-of-service vulnerability in the django.utils.html.urlize() function. The urlize and urlizetrunc template filters were susceptible to a denial-of-service attack via certain inputs containing many brackets. An attacker could exploit this vulnerability to cause significant delays or crashes in the affected application.

Django 4.2.7, 4.1.13 and 3.2.23 include a fix for CVE-2023-46695: Potential denial of service vulnerability in UsernameField on Windows.
https://www.djangoproject.com/weblog/2023/nov/01/security-releases

Affected versions of Django has a potential SQL injection vulnerability in the QuerySet.values() and QuerySet.values_list() methods. When used on models with a JSONField, these methods are susceptible to SQL injection through column aliases if a crafted JSON object key is passed as an argument.

Affected versions of Django are vulnerable to potential Denial of Service via certain inputs with a very large number of Unicode characters in django.utils.encoding.uri_to_iri().

Django 2.2.28, 3.2.13 and 4.0.4 include a fix for CVE-2022-28347: A SQL injection issue was discovered in QuerySet.explain() in Django 2.2 before 2.2.28, 3.2 before 3.2.13, and 4.0 before 4.0.4. This occurs by passing a crafted dictionary (with dictionary expansion) as the **options argument, and placing the injection payload in an option name.
https://www.djangoproject.com/weblog/2022/apr/11/security-releases

Django fixes a potential denial-of-service vulnerability in XML ``Deserializer``.

A security vulnerability has been discovered in certain versions of Django, affecting the password reset functionality. The PasswordResetForm class in django.contrib.auth.forms inadvertently allowed attackers to enumerate user email addresses by exploiting unhandled exceptions during the email sending process. This could be done by issuing password reset requests and observing the responses. Django has implemented a fix where these exceptions are now caught and logged using the django.contrib.auth logger, preventing potential information leakage through error responses.

Affected versions of the Django package are vulnerable to SQL Injection due to improper handling of column aliases containing periods in QuerySet.order_by() when combined with FilteredRelation. The QuerySet.order_by() method fails to properly sanitize column aliases that contain periods when the same alias is used in FilteredRelation via dictionary expansion. 
https://github.com/django/django/commit/90f5b10784ba5bf369caed87640e2b4394ea3314

Django 2.2.21, 3.1.9 and 3.2.1 include a fix for CVE-2021-31542: MultiPartParser, UploadedFile, and FieldFile allowed directory traversal via uploaded files with suitably crafted file names.
https://www.djangoproject.com/weblog/2021/may/04/security-releases

An issue was discovered in Django 2.2 before 2.2.13 and 3.0 before 3.0.7. Query parameters generated by the Django admin ForeignKeyRawIdWidget were not properly URL encoded, leading to a possibility of an XSS attack.

Affected versions of Django are vulnerable to potential denial-of-service in intcomma template filter when used with very long strings.

Django addresses a memory exhaustion issue in django.utils.numberformat.floatformat(). When floatformat receives a string representation of a number in scientific notation with a large exponent, it could lead to excessive memory consumption. To prevent this, decimals with more than 200 digits are now returned as-is.

In Django 3.2 before 3.2.16, 4.0 before 4.0.8, and 4.1 before 4.1.2, internationalized URLs were subject to a potential denial of service attack via the locale parameter, which is treated as a regular expression.

Affected versions of the `django` package are vulnerable to Download of Code Without Integrity Check due to improper handling of user-supplied input in the HTTP FileResponse class. The vulnerability arises because the Content-Disposition header of a FileResponse can be set using a filename derived from user input without sufficient validation. An attacker can exploit this by crafting a request that causes a file with malicious content to be downloaded, potentially executing arbitrary code on the client system when the file is opened.

Affected versions of the Django package are vulnerable to SQL Injection due to insufficient input sanitization in FilteredRelation column aliases. The FilteredRelation class fails to properly validate or escape column alias names when they are provided through dictionary expansion as keyword arguments to QuerySet.annotate() or QuerySet.alias() methods, allowing malicious SQL code to be injected directly into the generated database queries.

An issue was discovered in Django 2.2 before 2.2.16, 3.0 before 3.0.10, and 3.1 before 3.1.1 (when Python 3.7+ is used). The intermediate-level directories of the filesystem cache had the system's standard umask rather than 0o077.

Django versions 2.2.19, 3.0.13 and 3.1.7 include a fix for CVE-2021-23336: Web cache poisoning via 'django.utils.http.limited_parse_qsl()'. Django contains a copy of 'urllib.parse.parse_qsl' which was added to backport some security fixes. A further security fix has been issued recently such that 'parse_qsl(' no longer allows using ';' as a query parameter separator by default.

Django 2.2.27, 3.2.12 and 4.0.2 include a fix for CVE-2022-23833: Denial-of-service possibility in file uploads.
https://www.djangoproject.com/weblog/2022/feb/01/security-releases

In Django 2.2 before 2.2.20, 3.0 before 3.0.14, and 3.1 before 3.1.8, MultiPartParser allowed directory traversal via uploaded files with suitably crafted file names. Built-in upload handlers were not affected by this vulnerability.

CVE-2025-64458: Affected versions of the Django package are vulnerable to Denial of Service (DoS) due to slow Unicode NFKC normalization on Windows being applied to untrusted inputs. The django.contrib.auth.views.LoginView and django.contrib.auth.views.LogoutView, and django.views.i18n.set_language normalize user-controlled strings using Python’s NFKC algorithm, which is unusually slow on Windows for huge Unicode sequences and can be triggered to consume excessive CPU.

Django 2.2.26, 3.2.11 and 4.0.1 include a fix for CVE-2021-45115: UserAttributeSimilarityValidator incurred significant overhead in evaluating a submitted password that was artificially large in relation to the comparison values. In a situation where access to user registration was unrestricted, this provided a potential vector for a denial-of-service attack.
https://www.djangoproject.com/weblog/2022/jan/04/security-releases/

Django 4.1.7, 4.0.10 and 3.2.18 include a fix for CVE-2023-24580: Potential denial-of-service vulnerability in file uploads.
https://www.djangoproject.com/weblog/2023/feb/14/security-releases

Affected versions of Django are vulnerable to a potential denial-of-service (DoS) attack in the `django.utils.html.strip_tags()` method. The vulnerability occurs when the `strip_tags()` method or the `striptags` template filter processes inputs containing large sequences of nested, incomplete HTML entities.

Django affected versions are vulnerable to a potential SQL injection in the HasKey(lhs, rhs) lookup on Oracle databases. The vulnerability arises when untrusted data is directly used as the lhs value in the django.db.models.fields.json.HasKey lookup. However, applications using the jsonfield.has_key lookup with the __ syntax remain unaffected by this issue.

An issue was discovered in Django 5.2 before 5.2.3, 5.1 before 5.1.11, and 4.2 before 4.2.23. Internal HTTP response logging does not escape request.path, which allows remote attackers to potentially manipulate log output via crafted URLs. This may lead to log injection or forgery when logs are viewed in terminals or processed by external systems.

Django 2.2.18, 3.0.12 and 3.1.6 include a fix for CVE-2021-3281: The django.utils.archive.extract method (used by "startapp --template" and "startproject --template") allows directory traversal via an archive with absolute paths or relative paths with dot segments.

Affected versions of Django are vulnerable to a potential ReDoS (regular expression denial of service) in EmailValidator and URLValidator via a very large number of domain name labels of emails and URLs.

Django 2.2.26, 3.2.11 and 4.0.1 include a fix for CVE-2021-45116: An issue was discovered in Django 2.2 before 2.2.26, 3.2 before 3.2.11, and 4.0 before 4.0.1. Due to leveraging the Django Template Language's variable resolution logic, the dictsort template filter was potentially vulnerable to information disclosure, or an unintended method call, if passed a suitably crafted key.
https://www.djangoproject.com/weblog/2022/jan/04/security-releases

Django 2.2.24, 3.1.12, and 3.2.4 include a fix for CVE-2021-33571: In Django 2.2 before 2.2.24, 3.x before 3.1.12, and 3.2 before 3.2.4, URLValidator, validate_ipv4_address, and validate_ipv46_address do not prohibit leading zero characters in octal literals. This may allow a bypass of access control that is based on IP addresses. (validate_ipv4_address and validate_ipv46_address are unaffected with Python 3.9.5+).
https://www.djangoproject.com/weblog/2021/jun/02/security-releases

Django 3.2.14 and 4.0.6 include a fix for CVE-2022-34265: Potential SQL injection via Trunc(kind) and Extract(lookup_name) arguments.
https://www.djangoproject.com/weblog/2022/jul/04/security-releases

Affected versions of the Django package are vulnerable to Path Traversal due to improper validation of file paths in the django.contrib.admindocs module. The `TemplateDetailView` view allows staff members to verify the existence of arbitrary files by manipulating the file path. An attacker with staff privileges can exploit this vulnerability to check for the presence of files outside the template root directories, and if the `admindocs` templates are customized to display file contents, they can also access the contents of these files.

The {% debug %} template tag in Django 2.2 before 2.2.27, 3.2 before 3.2.12, and 4.0 before 4.0.2 does not properly encode the current context. This may lead to XSS.

Affected versions of Django are affected by a username enumeration vulnerability caused by timing differences in the django.contrib.auth.backends.ModelBackend.authenticate() method. This method allowed remote attackers to enumerate users through a timing attack involving login requests for users with unusable passwords. The timing difference in the authentication process exposed whether a username was valid or not, potentially aiding attackers in gaining unauthorized access.

Django has a potential denial-of-service vulnerability in django.utils.html.urlize() and AdminURLFieldWidget. The urlize and urlizetrunc functions, along with AdminURLFieldWidget, are vulnerable to denial-of-service attacks when handling inputs with a very large number of Unicode characters.

Django 4.2.1, 4.1.9 and 3.2.19 include a fix for CVE-2023-31047: In Django 3.2 before 3.2.19, 4.x before 4.1.9, and 4.2 before 4.2.1, it was possible to bypass validation when using one form field to upload multiple files. This multiple upload has never been supported by forms.FileField or forms.ImageField (only the last uploaded file was validated). However, Django's "Uploading multiple files" documentation suggested otherwise.
https://www.djangoproject.com/weblog/2023/may/03/security-releases

Django 2.2.28, 3.2.13 and 4.0.4 include a fix for CVE-2022-28346: An issue was discovered in Django 2.2 before 2.2.28, 3.2 before 3.2.13, and 4.0 before 4.0.4. QuerySet.annotate(), aggregate(), and extra() methods are subject to SQL injection in column aliases via a crafted dictionary (with dictionary expansion) as the passed **kwargs.
https://www.djangoproject.com/weblog/2022/apr/11/security-releases

Django 3.2.17, 4.0.9 and 4.1.6 includes a fix for CVE-2023-23969: In Django 3.2 before 3.2.17, 4.0 before 4.0.9, and 4.1 before 4.1.6, the parsed values of Accept-Language headers are cached in order to avoid repetitive parsing. This leads to a potential denial-of-service vector via excessive memory usage if the raw value of Accept-Language headers is very large.
https://www.djangoproject.com/weblog/2023/feb/01/security-releases

CVE-2025-64459: Affected versions of the Django package are vulnerable to SQL Injection due to improper input validation, allowing the internal _connector keyword argument to be accepted from untrusted dictionaries via expansion. The .filter(), .exclude(), and .get() methods on QuerySet, as well as the Q class, resolve **kwargs and will treat a supplied _connector value as the logical connector without constraining it to the expected set (AND/OR), permitting attacker-controlled tokens to influence SQL predicate construction.

Django fixes potential SQL injection in ``FilteredRelation`` column aliases on PostgreSQL.

Affected versions of the pillow package are vulnerable to Integer Overflow due to unchecked accumulation of glyph advance values while tracking the current rendering position during font processing. When a font supplies an excessively large advance for each glyph, the running position counter wraps around because the arithmetic is performed in a fixed-width integer type that cannot represent the resulting magnitude. A remote attacker who can supply a crafted font file to a target that uses Pillow's font rendering can trigger the overflow, leading to incorrect memory calculations and potential memory corruption.

Affected versions of the pillow package are vulnerable to Denial of Service due to an unbounded loop when traversing PDF cross-reference trailer chains without cycle detection. The PdfParser module follows Prev pointers in PDF trailers to read cross-reference sections, but it does not track previously processed offsets, so a trailer whose Prev pointer references its own offset or forms a longer cycle causes the parser to loop indefinitely. A remote attacker who supplies a crafted PDF document can cause the parsing process to hang, consuming 100% CPU and rendering the consuming application unresponsive.

Pillow 10.0.0 includes a fix for CVE-2023-44271: Denial of Service that uncontrollably allocates memory to process a given task, potentially causing a service to crash by having it run out of memory. This occurs for truetype in ImageFont when textlength in an ImageDraw instance operates on a long text argument.
https://github.com/python-pillow/Pillow/pull/7244

Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICO container, and thus an attempted memory allocation can be very large.

Pillow 10.3.0 introduces a security update addressing CVE-2024-28219 by replacing certain functions with strncpy to prevent buffer overflow issues.

Pillow 8.1.1 includes a fix for CVE-2021-25289: TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files because of certain interpretation conflicts with LibTIFF in RGBA mode. NOTE: this issue exists because of an incomplete fix for CVE-2020-35654.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow version 8.2.0 includes a fix for CVE-2021-28677: For EPS data, the readline implementation used in EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28677-fix-eps-dos-on-open

In libImaging/PcxDecode.c in Pillow before 7.1.0, an out-of-bounds read can occur when reading PCX files where state->shuffle is instructed to read beyond state->buffer.

Pillow 8.1.0 includes a fix for SGI Decode buffer overrun. CVE-2020-35655 #5173.

Pillow 8.1.0 fixes TIFF OOB Write error. CVE-2020-35654 #5175.

Pillow 8.3.0 includes a fix for CVE-2021-34552: Pillow through 8.2.0 and PIL (also known as Python Imaging Library) through 1.1.7 allow an attacker to pass controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.0.html#buffer-overflow
https://pillow.readthedocs.io/en/stable/releasenotes/index.html

Pillow 9.0.0 includes a fix for CVE-2022-22816: path_getbbox in path.c in Pillow before 9.0.0 has a buffer over-read during initialization of ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow version 8.2.0 includes a fix for CVE-2021-28676: For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28676-fix-fli-dos

Pillow 9.0.1 includes a fix for CVE-2022-22817: PIL.ImageMath.eval in Pillow before 9.0.0 allows evaluation of arbitrary expressions, such as ones that use the Python exec method. A first patch was issued for version 9.0.0 but it did not prevent builtins available to lambda expressions.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.1.html#security

Pillow 9.0.0 includes a fix for CVE-2022-22815: path_getbbox in path.c in Pillow before 9.0.0 improperly initializes ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow before 7.1.0 has multiple out-of-bounds reads in libImaging/FliDecode.c.

In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a number of out-of-bounds reads exist in the parsing of SGI image files, a different issue than CVE-2020-5311.

In Pillow before 7.1.0, there are two Buffer Overflows in libImaging/TiffDecode.c.

Pillow 8.2.0 includes a fix for CVE-2021-25288: There is an out-of-bounds read in J2kDecode, in j2ku_gray_i.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

Pillow 8.1.1 includes a fix for CVE-2021-25292: The PDF parser allows a regular expression DoS (ReDoS) attack via a crafted PDF file because of a catastrophic backtracking regex.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow before 9.0.1 allows attackers to delete files because spaces in temporary pathnames are mishandled.

Pillow 9.0.0 excludes carriage return in PDF regex to help prevent ReDoS.
https://github.com/python-pillow/Pillow/pull/5912
https://github.com/python-pillow/Pillow/commit/43b800d933c996226e4d7df00c33fcbe46d97363

Pillow 10.0.1 updates its C dependency 'libwebp' to 1.3.2 to include a fix for a high-risk vulnerability.
https://pillow.readthedocs.io/en/stable/releasenotes/10.0.1.html

Pillow 8.1.1 includes a fix for CVE-2021-25293: There is an out-of-bounds read in SGIRleDecode.c.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0, there are multiple out-of-bounds reads via a crafted JP2 file.

In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the user-supplied stride value is trusted for buffer calculations.

Pillow 8.1.1 includes a fix for CVE-2021-27921: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for a BLP container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the number of input layers relative to the size of the data block. This could lead to a DoS on Image.open prior to Image.load.

Pillow is affected by an arbitrary code execution vulnerability. If an attacker has control over the keys passed to the environment argument of PIL.ImageMath.eval(), they may be able to execute arbitrary code.
https://pillow.readthedocs.io/en/stable/releasenotes/10.2.0.html

Pillow from 5.2.0 and before 8.3.2 is vulnerable to Regular Expression Denial of Service (ReDoS) via the getrgb function.
https://github.com/python-pillow/Pillow/commit/9e08eb8f78fdfd2f476e1b20b7cf38683754866b
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.2.html

Pillow 8.1.1 includes a fix for CVE-2021-25291: In TiffDecode.c, there is an out-of-bounds read in TiffreadRGBATile via invalid tile boundaries.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-25290: In TiffDecode.c, there is a negative-offset memcpy with an invalid size.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.0.1 updates 'FreeType' used in binary wheels to v2.10.4 to include a security fix.

Pillow 9.0.0 ensures JpegImagePlugin stops at the end of a truncated file to avoid Denial of Service attacks.
https://github.com/python-pillow/Pillow/pull/5921
https://github.com/advisories/GHSA-4fx9-vc88-q2xc

Pillow is potentially vulnerable to DoS attacks through PIL.ImageFont.ImageFont.getmask(). A decompression bomb check has also been added to the affected function.

Pillow before 9.2.0 performs Improper Handling of Highly Compressed GIF Data (Data Amplification).

Pillow 8.2.0 includes a fix for CVE-2021-25287: There is an out-of-bounds read in J2kDecode, in j2ku_graya_la.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

Pillow version 8.2.0 includes a fix for CVE-2021-28678: For BLP data, BlpImagePlugin did not properly check that reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be run a large number of times on empty data.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28678-fix-blp-dos

Pillow 8.1.1 includes a fix for CVE-2021-27922: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICNS container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Affected versions of the pyasn1 package are vulnerable to Denial of Service (DoS) due to uncontrolled recursion when decoding deeply nested ASN.1 data. The vulnerability exists in the BER decoder’s indefLenValueDecoder, valueDecoder, and _decodeComponentsSchemaless code paths, where decodeFun is recursively invoked for nested SEQUENCE, SET, SEQUENCE OF, and SET OF elements without enforcing a recursion-depth limit.

Pyyaml version 5.4 includes a fix for CVE-2020-14343: A vulnerability was discovered in the PyYAML library in versions before 5.4, where it is susceptible to arbitrary code execution when it processes untrusted YAML files through the full_load method or with the FullLoader loader. Applications that use the library to process untrusted input may be vulnerable to this flaw. This flaw allows an attacker to execute arbitrary code on the system by abusing the python/object/new constructor. This flaw is due to an incomplete fix for CVE-2020-1747.
https://bugzilla.redhat.com/show_bug.cgi?id=1860466

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in inventory.
https://github.com/sphinx-doc/sphinx/issues/8175
https://github.com/sphinx-doc/sphinx/commit/f7b872e673f9b359a61fd287a7338a28077840d2

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in docstring.
https://github.com/sphinx-doc/sphinx/issues/8172
https://github.com/sphinx-doc/sphinx/commit/f00e75278c5999f40b214d8934357fbf0e705417

Affected versions of the sqlparse package are vulnerable to Denial of Service (DoS) due to missing hard limits on token grouping recursion depth and token processing when formatting very large SQL tuple lists. During sqlparse.format() processing, the sqlparse.engine.grouping._group_matching() and sqlparse.engine.grouping._group() functions can recurse and iterate over excessively large tlist.tokens without enforcing MAX_GROUPING_DEPTH or MAX_GROUPING_TOKENS, allowing grouping work to grow until it effectively hangs.

Affected versions of this package are vulnerable to Denial of Service (DoS) attacks due to Algorithmic Complexity. The SQL parser fails to enforce limits when processing deeply nested tuples and large token sequences, leading to excessive resource consumption through crafted SQL statements with extreme nesting depth or token counts.

**Note:** This issue is due to an incomplete fix for CVE-2024-4340.

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

Sqlparse 0.4.4 includes a fix for CVE-2023-30608: Parser contains a regular expression that is vulnerable to ReDOS (Regular Expression Denial of Service).
https://github.com/andialbrecht/sqlparse/security/advisories/GHSA-rrm6-wvj7-cwh2

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

Affected versions of the urllib3 package are vulnerable to Information Disclosure due to improper handling of sensitive headers during cross-origin redirects in the low-level proxy API. When following cross-origin redirects via ProxyManager.connection_from_url().urlopen() with assert_same_host=False, sensitive headers including Authorization, Cookie, and Proxy-Authorization are not stripped, unlike the high-level API, which removes them via Retry.DEFAULT_REMOVE_HEADERS_ON_REDIRECT. An attacker controlling a redirect target can capture these sensitive headers from requests that follow cross-origin redirects through the low-level proxy API path.

Urllib3 1.25.9 includes a fix for CVE-2020-26137: Urllib3 before 1.25.9 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of putrequest(). NOTE: this is similar to CVE-2020-26116.
https://github.com/python/cpython/issues/83784
https://github.com/urllib3/urllib3/pull/1800

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of urllib3 are vulnerable to an HTTP redirect handling vulnerability that fails to remove the HTTP request body when a POST changes to a GET via 301, 302, or 303 responses. This flaw can expose sensitive request data if the origin service is compromised and redirects to a malicious endpoint, though exploitability is low when no sensitive data is used. The vulnerability affects automatic redirect behavior. It is fixed in versions 1.26.18 and 2.0.7; update or disable redirects using redirects=False.
This vulnerability is specific to Python's urllib3 library.

Urllib3 1.26.17 and 2.0.5 include a fix for CVE-2023-43804: Urllib3 doesn't treat the 'Cookie' HTTP header special or provide any helpers for managing cookies over HTTP, that is the responsibility of the user. However, it is possible for a user to specify a 'Cookie' header and unknowingly leak information via HTTP redirects to a different origin if that user doesn't disable redirects explicitly.
https://github.com/urllib3/urllib3/security/advisories/GHSA-v845-jxx5-vc9f

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 1.26.5 includes a fix for CVE-2021-33503: When provided with a URL containing many @ characters in the authority component, the authority regular expression exhibits catastrophic backtracking, causing a denial of service if a URL were passed as a parameter or redirected to via an HTTP redirect.
https://github.com/advisories/GHSA-q2q7-5pp4-w6pg

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Ipython versions 8.0.1, 7.31.1, 7.16.3 and 5.11 include a fix for CVE-2022-21699: Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine.
https://github.com/ipython/ipython/security/advisories/GHSA-pq7m-3gw7-gq5x

IPython 8.10.0 includes a fix for CVE-2023-24816: Versions prior to 8.10.0 are subject to a command injection vulnerability with very specific prerequisites. This vulnerability requires that the function 'IPython.utils.terminal.set_term_title' be called on Windows in a Python environment where ctypes is not available. The dependency on 'ctypes' in 'IPython.utils._process_win32' prevents the vulnerable code from ever being reached in the ipython binary. However, as a library that could be used by another tool 'set_term_title' could be called and hence introduce a vulnerability. If an attacker get untrusted input to an instance of this function they would be able to inject shell commands as current process and limited to the scope of the current process. As a workaround, users should ensure that any calls to the 'IPython.utils.terminal.set_term_title' function are done with trusted or filtered input.
https://github.com/ipython/ipython/security/advisories/GHSA-29gw-9793-fvw7

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of the Werkzeug package are vulnerable to Denial of Service (DoS) due to improper handling of Windows special device names in the safe_join function. In Werkzeug versions before 3.1.4, safe_join permits path segments such as “CON” or “AUX” to pass validation, allowing send_from_directory to construct a path that resolves to a Windows device file, which opens successfully but then blocks indefinitely when read.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of the Werkzeug package are vulnerable to Denial of Service (DoS) due to improper handling of Windows special device names in path joining logic. The safe_join() function fails to reject device-name path segments when they are preceded by other segments (for example, example/NUL), and send_from_directory() relies on safe_join() when resolving user-supplied file paths.

Affected versions of the Werkzeug package are vulnerable to Improper Handling of Windows Device Names due to incomplete validation of Windows reserved device names in user-controlled path segments. In werkzeug.security.safe_join, path components ending with special device names (for example CON or AUX) are not reliably rejected when they include compound extensions (for example CON.txt.html) or trailing spaces, and werkzeug.utils.send_from_directory relies on safe_join when resolving a requested filename.

Affected versions of the gunicorn package are vulnerable to HTTP Request/Response Smuggling due to improper validation of the Transfer-Encoding header that enables a TE.CL desynchronisation condition. Gunicorn’s HTTP parser does not consistently enforce RFC semantics when parsing conflicting or unsupported request framing—such as messages containing both Transfer-Encoding and Content-Length—so the backend may fall back to Content-Length while an intermediary treats the message as chunked.

Gunicorn fails to properly validate Transfer-Encoding headers, leading to HTTP Request Smuggling (HRS) vulnerabilities. By crafting requests with conflicting Transfer-Encoding headers, attackers can bypass security restrictions and access restricted endpoints. This issue is due to Gunicorn's handling of Transfer-Encoding headers, where it incorrectly processes requests with multiple, conflicting Transfer-Encoding headers, treating them as chunked regardless of the final encoding specified. This vulnerability allows for a range of attacks including cache poisoning, session manipulation, and data exposure.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Affected versions of the requests package are vulnerable to Insecure Temporary File reuse due to predictable temporary filename generation in extract_zipped_paths(). The requests.utils.extract_zipped_paths() utility extracts files from zip archives into the system temporary directory using a deterministic path, and if that file already exists, the function reuses it without validating that it is the expected extracted content.

Affected versions of Requests are vulnerable to proxy credential leakage. When redirected to an HTTPS endpoint, the Proxy-Authorization header is forwarded to the destination server due to the use of rebuild_proxies to reattach the header. This may allow a malicious actor to exfiltrate sensitive information.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Sentry-sdk 1.4.1 includes a fix for a Race Condition vulnerability.
https://github.com/getsentry/sentry-python/pull/1203

Sentry-sdk 1.14.0 includes a fix for CVE-2023-28117: When using the Django integration of versions prior to 1.14.0 of the Sentry SDK in a specific configuration it is possible to leak sensitive cookies values, including the session cookie to Sentry. These sensitive cookies could then be used by someone with access to your Sentry issues to impersonate or escalate their privileges within your application. In order for these sensitive values to be leaked, the Sentry SDK configuration must have 'sendDefaultPII' set to 'True'; one must use a custom name for either 'SESSION_COOKIE_NAME' or 'CSRF_COOKIE_NAME' in one's Django settings; and one must not be configured in one's organization or project settings to use Sentry's data scrubbing features to account for the custom cookie names. As of version 1.14.0, the Django integration of the 'sentry-sdk' will detect the custom cookie names based on one's Django settings and will remove the values from the payload before sending the data to Sentry. As a workaround, use the SDK's filtering mechanism to remove the cookies from the payload that is sent to Sentry. For error events, this can be done with the 'before_send' callback method and for performance related events (transactions) one can use the 'before_send_transaction' callback method. Those who want to handle filtering of these values on the server-side can also use Sentry's advanced data scrubbing feature to account for the custom cookie names. Look for the '$http.cookies', '$http.headers', '$request.cookies', or '$request.headers' fields to target with a scrubbing rule.
https://github.com/getsentry/sentry-python/security/advisories/GHSA-29pr-6jr8-q5jm

Certifi 2022.12.07 includes a fix for CVE-2022-23491: Certifi 2022.12.07 removes root certificates from "TrustCor" from the root store. These are in the process of being removed from Mozilla's trust store. TrustCor's root certificates are being removed pursuant to an investigation prompted by media reporting that TrustCor's ownership also operated a business that produced spyware. Conclusions of Mozilla's investigation can be found in the linked google group discussion.

Certifi 2023.07.22 includes a fix for CVE-2023-37920: Certifi prior to version 2023.07.22 recognizes "e-Tugra" root certificates. e-Tugra's root certificates were subject to an investigation prompted by reporting of security issues in their systems. Certifi 2023.07.22 removes root certificates from "e-Tugra" from the root store.
https://github.com/certifi/python-certifi/security/advisories/GHSA-xqr8-7jwr-rhp7

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

Django-filter 2.4.0 includes a fix for CVE-2020-15225: In django-filter before version 2.4.0, automatically generated 'NumberFilter' instances, whose value was later converted to an integer, were subject to potential DoS from maliciously input using exponential format with sufficiently large exponents. Version 2.4.0+ applies a 'MaxValueValidator' with a a default 'limit_value' of 1e50 to the form field used by 'NumberFilter' instances. In addition, 'NumberFilter' implements the new 'get_max_validator()' which should return a configured validator instance to customise the limit, or else 'None' to disable the additional validation. Users may manually apply an equivalent validator if they are not able to upgrade.
https://github.com/carltongibson/django-filter/security/advisories/GHSA-x7gm-rfgv-w973

A SQL Injection issue in the SQL Panel in Jazzband Django Debug Toolbar before 1.11.1, 2.x before 2.2.1, and 3.x before 3.2.1 allows attackers to execute SQL statements by changing the raw_sql input field of the SQL explain, analyze, or select form. See CVE-2021-30459.

A flaw was found in Django REST Framework versions before 3.12.0 and before 3.11.2. When using the browseable API viewer, Django REST Framework fails to properly escape certain strings that can come from user input. This allows a user who can control those strings to inject malicious <script> tags, leading to a cross-site-scripting (XSS) vulnerability.

Affected versions of the package djangorestframework are vulnerable to Cross-site Scripting (XSS) via the break_long_headers template filter due to improper input sanitization before splitting and joining with <br> tags.

Django-celery-results through 1.2.1 stores task results in the database. Among the data it stores are the variables passed into the tasks. The variables may contain sensitive cleartext information that does not belong unencrypted in the database. See CVE-2020-17495.

Python Social Auth is a social authentication/registration mechanism. Prior to version 5.4.1, due to default case-insensitive collation in MySQL or MariaDB databases, third-party authentication user IDs are not case-sensitive and could cause different IDs to match. This issue has been addressed by a fix released in version 5.4.1. An immediate workaround would be to change collation of the affected field. See CVE-2024-32879.

Affected versions of the social-auth-app-django package are vulnerable to Authentication Bypass due to unintended email-based account association during the authentication pipeline. In social_django.storage.create_user (invoked by social_core.pipeline.user.create_user), an IntegrityError during user creation triggers a fallback that returns an existing User looked up by e-mail, effectively performing social_core.pipeline.social_auth.associate_by_email even when that step is disabled.

Rsa 4.7 includes a fix for CVE-2020-25658: It was found that python-rsa is vulnerable to Bleichenbacher timing attacks. An attacker can use this flaw via the RSA decryption API to decrypt parts of the cipher text encrypted with RSA.

Rsa 4.3 includes a fix for CVE-2020-13757: Python-RSA before 4.3 ignores leading '\0' bytes during decryption of ciphertext. This could conceivably have a security-relevant impact, e.g., by helping an attacker to infer that an application uses Python-RSA, or if the length of accepted ciphertext affects application behavior (such as by causing excessive memory allocation).

Affected versions of Idna are vulnerable to Denial Of Service via the idna.encode(), where a specially crafted argument could lead to significant resource consumption. In version 3.7, this function has been updated to reject such inputs efficiently, minimizing resource use. A practical workaround involves enforcing a maximum domain name length of 253 characters before encoding, as the vulnerability is triggered by unusually large inputs that normal operations wouldn't encounter.

Affected versions of the idna package are vulnerable to Denial of Service due to an incomplete fix for CVE-2024-3651 that still allows specially crafted inputs to consume significant resources during encoding. The idna.encode() function invokes the valid_contexto validator on every label before applying length-based rejection, so payloads such as long repetitions of the Arabic-Indic digit U+0660 or sequences of the Katakana middle dot U+30FB followed by a CJK character cause valid_contexto to perform extensive context-rule processing across each character. A remote attacker who can supply domain-name input to an application that calls idna.encode() without first enforcing the 253-character DNS length limit can submit arbitrarily large strings that drive the validator to exhaust CPU time, resulting in Denial of Service through resource consumption.

Kombu 5.2.1 updates Amazon sqs dependency 'urllib3' minimum version to 1.26.7 to include security fixes.
https://github.com/celery/kombu/commit/f3b04558fa0df4ecc383c93e0b3b300d95e17c47

Affected versions of this package are vulnerable to Insufficient Verification of Data Authenticity. The library does not validate the `crit` (Critical) Header Parameter as required by RFC 7515 §4.1.11 — when a JWT contains a `crit` array listing extensions that the library does not understand, the token is accepted instead of rejected. An attacker can exploit this vulnerability by crafting JWTs with unknown critical extensions (e.g., MFA requirements, token binding, scope restrictions) that are silently ignored, potentially bypassing security policies or causing split-brain verification in mixed-library deployments where other RFC-compliant libraries would reject the same token.

PyJWT 2.4.0 includes a fix for CVE-2022-29217: An attacker submitting the JWT token can choose the used signing algorithm. The PyJWT library requires that the application chooses what algorithms are supported. The application can specify 'jwt.algorithms.get_default_algorithms()' to get support for all algorithms, or specify a single algorithm. The issue is not that big as 'algorithms=jwt.algorithms.get_default_algorithms()' has to be used. As a workaround, always be explicit with the algorithms that are accepted and expected when decoding.

An issue was discovered in Django 4.2 before 4.2.21, 5.1 before 5.1.9, and 5.2 before 5.2.1. The django.utils.html.strip_tags() function is vulnerable to a potential denial-of-service (slow performance) when processing inputs containing large sequences of incomplete HTML tags. The template filter striptags is also vulnerable, because it is built on top of strip_tags().

A potential denial-of-service vulnerability has been identified in Django's urlize() and urlizetrunc() functions in django.utils.html. This vulnerability can be triggered by inputting huge strings containing a specific sequence of characters.

Affected versions of the Django package are vulnerable to Denial of Service (DoS) due to inefficient string concatenation when processing duplicate HTTP headers in ASGI mode. The ASGIRequest class combines repeated headers using repeated string concatenation, resulting in super-linear (quadratic) time complexity when processing requests with many duplicate headers.

Django 2.2.26, 3.2.11 and 4.0.1 include a fix for CVE-2021-45452: Storage.save in Django 2.2 before 2.2.26, 3.2 before 3.2.11, and 4.0 before 4.0.1 allows directory traversal if crafted filenames are directly passed to it.
https://www.djangoproject.com/weblog/2022/jan/04/security-releases/

An issue was discovered in Django 2.2 before 2.2.13 and 3.0 before 3.0.7. In cases where a memcached backend does not perform key validation, passing malformed cache keys could result in a key collision, and potential data leakage.

Affected versions of Django are vulnerable to Denial-of-Service via django.utils.text.Truncator. The django.utils.text.Truncator chars() and words() methods (when used with html=True) are subject to a potential DoS (denial of service) attack via certain inputs with very long, potentially malformed HTML text. The chars() and words() methods are used to implement the truncatechars_html and truncatewords_html template filters, which are thus also vulnerable. NOTE: this issue exists because of an incomplete fix for CVE-2019-14232.

Django 2.2.16, 3.0.10 and 3.1.1 include a fix for CVE-2020-24583: An issue was discovered in Django 2.2 before 2.2.16, 3.0 before 3.0.10, and 3.1 before 3.1.1 (when Python 3.7+ is used). FILE_UPLOAD_DIRECTORY_PERMISSIONS mode was not applied to intermediate-level directories created in the process of uploading files. It was also not applied to intermediate-level collected static directories when using the collectstatic management command.
#NOTE: This vulnerability affects only users of Python versions above 3.7.
https://www.djangoproject.com/weblog/2020/sep/01/security-releases

Affected versions of Django are vulnerable to potential regular expression denial-of-service (REDoS). django.utils.text.Truncator.words() method (with html=True) and truncatewords_html template filter were subject to a potential regular expression denial-of-service attack using a suitably crafted string (follow up to CVE-2019-14232 and CVE-2023-43665).

Affected versions of Django are affected by a potential denial-of-service vulnerability in the django.utils.html.urlize() function. The urlize and urlizetrunc template filters were susceptible to a denial-of-service attack via certain inputs containing many brackets. An attacker could exploit this vulnerability to cause significant delays or crashes in the affected application.

Django 4.2.7, 4.1.13 and 3.2.23 include a fix for CVE-2023-46695: Potential denial of service vulnerability in UsernameField on Windows.
https://www.djangoproject.com/weblog/2023/nov/01/security-releases

Affected versions of Django has a potential SQL injection vulnerability in the QuerySet.values() and QuerySet.values_list() methods. When used on models with a JSONField, these methods are susceptible to SQL injection through column aliases if a crafted JSON object key is passed as an argument.

Affected versions of Django are vulnerable to potential Denial of Service via certain inputs with a very large number of Unicode characters in django.utils.encoding.uri_to_iri().

Django 2.2.28, 3.2.13 and 4.0.4 include a fix for CVE-2022-28347: A SQL injection issue was discovered in QuerySet.explain() in Django 2.2 before 2.2.28, 3.2 before 3.2.13, and 4.0 before 4.0.4. This occurs by passing a crafted dictionary (with dictionary expansion) as the **options argument, and placing the injection payload in an option name.
https://www.djangoproject.com/weblog/2022/apr/11/security-releases

Django fixes a potential denial-of-service vulnerability in XML ``Deserializer``.

A security vulnerability has been discovered in certain versions of Django, affecting the password reset functionality. The PasswordResetForm class in django.contrib.auth.forms inadvertently allowed attackers to enumerate user email addresses by exploiting unhandled exceptions during the email sending process. This could be done by issuing password reset requests and observing the responses. Django has implemented a fix where these exceptions are now caught and logged using the django.contrib.auth logger, preventing potential information leakage through error responses.

Affected versions of the Django package are vulnerable to SQL Injection due to improper handling of column aliases containing periods in QuerySet.order_by() when combined with FilteredRelation. The QuerySet.order_by() method fails to properly sanitize column aliases that contain periods when the same alias is used in FilteredRelation via dictionary expansion. 
https://github.com/django/django/commit/90f5b10784ba5bf369caed87640e2b4394ea3314

Django 2.2.21, 3.1.9 and 3.2.1 include a fix for CVE-2021-31542: MultiPartParser, UploadedFile, and FieldFile allowed directory traversal via uploaded files with suitably crafted file names.
https://www.djangoproject.com/weblog/2021/may/04/security-releases

An issue was discovered in Django 2.2 before 2.2.13 and 3.0 before 3.0.7. Query parameters generated by the Django admin ForeignKeyRawIdWidget were not properly URL encoded, leading to a possibility of an XSS attack.

Affected versions of Django are vulnerable to potential denial-of-service in intcomma template filter when used with very long strings.

Django addresses a memory exhaustion issue in django.utils.numberformat.floatformat(). When floatformat receives a string representation of a number in scientific notation with a large exponent, it could lead to excessive memory consumption. To prevent this, decimals with more than 200 digits are now returned as-is.

In Django 3.2 before 3.2.16, 4.0 before 4.0.8, and 4.1 before 4.1.2, internationalized URLs were subject to a potential denial of service attack via the locale parameter, which is treated as a regular expression.

Affected versions of the `django` package are vulnerable to Download of Code Without Integrity Check due to improper handling of user-supplied input in the HTTP FileResponse class. The vulnerability arises because the Content-Disposition header of a FileResponse can be set using a filename derived from user input without sufficient validation. An attacker can exploit this by crafting a request that causes a file with malicious content to be downloaded, potentially executing arbitrary code on the client system when the file is opened.

Affected versions of the Django package are vulnerable to SQL Injection due to insufficient input sanitization in FilteredRelation column aliases. The FilteredRelation class fails to properly validate or escape column alias names when they are provided through dictionary expansion as keyword arguments to QuerySet.annotate() or QuerySet.alias() methods, allowing malicious SQL code to be injected directly into the generated database queries.

An issue was discovered in Django 2.2 before 2.2.16, 3.0 before 3.0.10, and 3.1 before 3.1.1 (when Python 3.7+ is used). The intermediate-level directories of the filesystem cache had the system's standard umask rather than 0o077.

Django versions 2.2.19, 3.0.13 and 3.1.7 include a fix for CVE-2021-23336: Web cache poisoning via 'django.utils.http.limited_parse_qsl()'. Django contains a copy of 'urllib.parse.parse_qsl' which was added to backport some security fixes. A further security fix has been issued recently such that 'parse_qsl(' no longer allows using ';' as a query parameter separator by default.

Django 2.2.27, 3.2.12 and 4.0.2 include a fix for CVE-2022-23833: Denial-of-service possibility in file uploads.
https://www.djangoproject.com/weblog/2022/feb/01/security-releases

In Django 2.2 before 2.2.20, 3.0 before 3.0.14, and 3.1 before 3.1.8, MultiPartParser allowed directory traversal via uploaded files with suitably crafted file names. Built-in upload handlers were not affected by this vulnerability.

CVE-2025-64458: Affected versions of the Django package are vulnerable to Denial of Service (DoS) due to slow Unicode NFKC normalization on Windows being applied to untrusted inputs. The django.contrib.auth.views.LoginView and django.contrib.auth.views.LogoutView, and django.views.i18n.set_language normalize user-controlled strings using Python’s NFKC algorithm, which is unusually slow on Windows for huge Unicode sequences and can be triggered to consume excessive CPU.

Django 2.2.26, 3.2.11 and 4.0.1 include a fix for CVE-2021-45115: UserAttributeSimilarityValidator incurred significant overhead in evaluating a submitted password that was artificially large in relation to the comparison values. In a situation where access to user registration was unrestricted, this provided a potential vector for a denial-of-service attack.
https://www.djangoproject.com/weblog/2022/jan/04/security-releases/

Django 4.1.7, 4.0.10 and 3.2.18 include a fix for CVE-2023-24580: Potential denial-of-service vulnerability in file uploads.
https://www.djangoproject.com/weblog/2023/feb/14/security-releases

Affected versions of Django are vulnerable to a potential denial-of-service (DoS) attack in the `django.utils.html.strip_tags()` method. The vulnerability occurs when the `strip_tags()` method or the `striptags` template filter processes inputs containing large sequences of nested, incomplete HTML entities.

Django affected versions are vulnerable to a potential SQL injection in the HasKey(lhs, rhs) lookup on Oracle databases. The vulnerability arises when untrusted data is directly used as the lhs value in the django.db.models.fields.json.HasKey lookup. However, applications using the jsonfield.has_key lookup with the __ syntax remain unaffected by this issue.

An issue was discovered in Django 5.2 before 5.2.3, 5.1 before 5.1.11, and 4.2 before 4.2.23. Internal HTTP response logging does not escape request.path, which allows remote attackers to potentially manipulate log output via crafted URLs. This may lead to log injection or forgery when logs are viewed in terminals or processed by external systems.

Django 2.2.18, 3.0.12 and 3.1.6 include a fix for CVE-2021-3281: The django.utils.archive.extract method (used by "startapp --template" and "startproject --template") allows directory traversal via an archive with absolute paths or relative paths with dot segments.

Affected versions of Django are vulnerable to a potential ReDoS (regular expression denial of service) in EmailValidator and URLValidator via a very large number of domain name labels of emails and URLs.

Django 2.2.26, 3.2.11 and 4.0.1 include a fix for CVE-2021-45116: An issue was discovered in Django 2.2 before 2.2.26, 3.2 before 3.2.11, and 4.0 before 4.0.1. Due to leveraging the Django Template Language's variable resolution logic, the dictsort template filter was potentially vulnerable to information disclosure, or an unintended method call, if passed a suitably crafted key.
https://www.djangoproject.com/weblog/2022/jan/04/security-releases

Django 2.2.24, 3.1.12, and 3.2.4 include a fix for CVE-2021-33571: In Django 2.2 before 2.2.24, 3.x before 3.1.12, and 3.2 before 3.2.4, URLValidator, validate_ipv4_address, and validate_ipv46_address do not prohibit leading zero characters in octal literals. This may allow a bypass of access control that is based on IP addresses. (validate_ipv4_address and validate_ipv46_address are unaffected with Python 3.9.5+).
https://www.djangoproject.com/weblog/2021/jun/02/security-releases

Django 3.2.14 and 4.0.6 include a fix for CVE-2022-34265: Potential SQL injection via Trunc(kind) and Extract(lookup_name) arguments.
https://www.djangoproject.com/weblog/2022/jul/04/security-releases

Affected versions of the Django package are vulnerable to Path Traversal due to improper validation of file paths in the django.contrib.admindocs module. The `TemplateDetailView` view allows staff members to verify the existence of arbitrary files by manipulating the file path. An attacker with staff privileges can exploit this vulnerability to check for the presence of files outside the template root directories, and if the `admindocs` templates are customized to display file contents, they can also access the contents of these files.

The {% debug %} template tag in Django 2.2 before 2.2.27, 3.2 before 3.2.12, and 4.0 before 4.0.2 does not properly encode the current context. This may lead to XSS.

Affected versions of Django are affected by a username enumeration vulnerability caused by timing differences in the django.contrib.auth.backends.ModelBackend.authenticate() method. This method allowed remote attackers to enumerate users through a timing attack involving login requests for users with unusable passwords. The timing difference in the authentication process exposed whether a username was valid or not, potentially aiding attackers in gaining unauthorized access.

Django has a potential denial-of-service vulnerability in django.utils.html.urlize() and AdminURLFieldWidget. The urlize and urlizetrunc functions, along with AdminURLFieldWidget, are vulnerable to denial-of-service attacks when handling inputs with a very large number of Unicode characters.

Django 4.2.1, 4.1.9 and 3.2.19 include a fix for CVE-2023-31047: In Django 3.2 before 3.2.19, 4.x before 4.1.9, and 4.2 before 4.2.1, it was possible to bypass validation when using one form field to upload multiple files. This multiple upload has never been supported by forms.FileField or forms.ImageField (only the last uploaded file was validated). However, Django's "Uploading multiple files" documentation suggested otherwise.
https://www.djangoproject.com/weblog/2023/may/03/security-releases

Django 2.2.28, 3.2.13 and 4.0.4 include a fix for CVE-2022-28346: An issue was discovered in Django 2.2 before 2.2.28, 3.2 before 3.2.13, and 4.0 before 4.0.4. QuerySet.annotate(), aggregate(), and extra() methods are subject to SQL injection in column aliases via a crafted dictionary (with dictionary expansion) as the passed **kwargs.
https://www.djangoproject.com/weblog/2022/apr/11/security-releases

Django 3.2.17, 4.0.9 and 4.1.6 includes a fix for CVE-2023-23969: In Django 3.2 before 3.2.17, 4.0 before 4.0.9, and 4.1 before 4.1.6, the parsed values of Accept-Language headers are cached in order to avoid repetitive parsing. This leads to a potential denial-of-service vector via excessive memory usage if the raw value of Accept-Language headers is very large.
https://www.djangoproject.com/weblog/2023/feb/01/security-releases

CVE-2025-64459: Affected versions of the Django package are vulnerable to SQL Injection due to improper input validation, allowing the internal _connector keyword argument to be accepted from untrusted dictionaries via expansion. The .filter(), .exclude(), and .get() methods on QuerySet, as well as the Q class, resolve **kwargs and will treat a supplied _connector value as the logical connector without constraining it to the expected set (AND/OR), permitting attacker-controlled tokens to influence SQL predicate construction.

Django fixes potential SQL injection in ``FilteredRelation`` column aliases on PostgreSQL.

Affected versions of the pillow package are vulnerable to Integer Overflow due to unchecked accumulation of glyph advance values while tracking the current rendering position during font processing. When a font supplies an excessively large advance for each glyph, the running position counter wraps around because the arithmetic is performed in a fixed-width integer type that cannot represent the resulting magnitude. A remote attacker who can supply a crafted font file to a target that uses Pillow's font rendering can trigger the overflow, leading to incorrect memory calculations and potential memory corruption.

Affected versions of the pillow package are vulnerable to Denial of Service due to an unbounded loop when traversing PDF cross-reference trailer chains without cycle detection. The PdfParser module follows Prev pointers in PDF trailers to read cross-reference sections, but it does not track previously processed offsets, so a trailer whose Prev pointer references its own offset or forms a longer cycle causes the parser to loop indefinitely. A remote attacker who supplies a crafted PDF document can cause the parsing process to hang, consuming 100% CPU and rendering the consuming application unresponsive.

Pillow 10.0.0 includes a fix for CVE-2023-44271: Denial of Service that uncontrollably allocates memory to process a given task, potentially causing a service to crash by having it run out of memory. This occurs for truetype in ImageFont when textlength in an ImageDraw instance operates on a long text argument.
https://github.com/python-pillow/Pillow/pull/7244

Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICO container, and thus an attempted memory allocation can be very large.

Pillow 10.3.0 introduces a security update addressing CVE-2024-28219 by replacing certain functions with strncpy to prevent buffer overflow issues.

Pillow 8.1.1 includes a fix for CVE-2021-25289: TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files because of certain interpretation conflicts with LibTIFF in RGBA mode. NOTE: this issue exists because of an incomplete fix for CVE-2020-35654.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow version 8.2.0 includes a fix for CVE-2021-28677: For EPS data, the readline implementation used in EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28677-fix-eps-dos-on-open

In libImaging/PcxDecode.c in Pillow before 7.1.0, an out-of-bounds read can occur when reading PCX files where state->shuffle is instructed to read beyond state->buffer.

Pillow 8.1.0 includes a fix for SGI Decode buffer overrun. CVE-2020-35655 #5173.

Pillow 8.1.0 fixes TIFF OOB Write error. CVE-2020-35654 #5175.

Pillow 8.3.0 includes a fix for CVE-2021-34552: Pillow through 8.2.0 and PIL (also known as Python Imaging Library) through 1.1.7 allow an attacker to pass controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.0.html#buffer-overflow
https://pillow.readthedocs.io/en/stable/releasenotes/index.html

Pillow 9.0.0 includes a fix for CVE-2022-22816: path_getbbox in path.c in Pillow before 9.0.0 has a buffer over-read during initialization of ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow version 8.2.0 includes a fix for CVE-2021-28676: For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28676-fix-fli-dos

Pillow 9.0.1 includes a fix for CVE-2022-22817: PIL.ImageMath.eval in Pillow before 9.0.0 allows evaluation of arbitrary expressions, such as ones that use the Python exec method. A first patch was issued for version 9.0.0 but it did not prevent builtins available to lambda expressions.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.1.html#security

Pillow 9.0.0 includes a fix for CVE-2022-22815: path_getbbox in path.c in Pillow before 9.0.0 improperly initializes ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow before 7.1.0 has multiple out-of-bounds reads in libImaging/FliDecode.c.

In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a number of out-of-bounds reads exist in the parsing of SGI image files, a different issue than CVE-2020-5311.

In Pillow before 7.1.0, there are two Buffer Overflows in libImaging/TiffDecode.c.

Pillow 8.2.0 includes a fix for CVE-2021-25288: There is an out-of-bounds read in J2kDecode, in j2ku_gray_i.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

Pillow 8.1.1 includes a fix for CVE-2021-25292: The PDF parser allows a regular expression DoS (ReDoS) attack via a crafted PDF file because of a catastrophic backtracking regex.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow before 9.0.1 allows attackers to delete files because spaces in temporary pathnames are mishandled.

Pillow 9.0.0 excludes carriage return in PDF regex to help prevent ReDoS.
https://github.com/python-pillow/Pillow/pull/5912
https://github.com/python-pillow/Pillow/commit/43b800d933c996226e4d7df00c33fcbe46d97363

Pillow 10.0.1 updates its C dependency 'libwebp' to 1.3.2 to include a fix for a high-risk vulnerability.
https://pillow.readthedocs.io/en/stable/releasenotes/10.0.1.html

Pillow 8.1.1 includes a fix for CVE-2021-25293: There is an out-of-bounds read in SGIRleDecode.c.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0, there are multiple out-of-bounds reads via a crafted JP2 file.

In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the user-supplied stride value is trusted for buffer calculations.

Pillow 8.1.1 includes a fix for CVE-2021-27921: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for a BLP container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the number of input layers relative to the size of the data block. This could lead to a DoS on Image.open prior to Image.load.

Pillow is affected by an arbitrary code execution vulnerability. If an attacker has control over the keys passed to the environment argument of PIL.ImageMath.eval(), they may be able to execute arbitrary code.
https://pillow.readthedocs.io/en/stable/releasenotes/10.2.0.html

Pillow from 5.2.0 and before 8.3.2 is vulnerable to Regular Expression Denial of Service (ReDoS) via the getrgb function.
https://github.com/python-pillow/Pillow/commit/9e08eb8f78fdfd2f476e1b20b7cf38683754866b
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.2.html

Pillow 8.1.1 includes a fix for CVE-2021-25291: In TiffDecode.c, there is an out-of-bounds read in TiffreadRGBATile via invalid tile boundaries.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-25290: In TiffDecode.c, there is a negative-offset memcpy with an invalid size.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.0.1 updates 'FreeType' used in binary wheels to v2.10.4 to include a security fix.

Pillow 9.0.0 ensures JpegImagePlugin stops at the end of a truncated file to avoid Denial of Service attacks.
https://github.com/python-pillow/Pillow/pull/5921
https://github.com/advisories/GHSA-4fx9-vc88-q2xc

Pillow is potentially vulnerable to DoS attacks through PIL.ImageFont.ImageFont.getmask(). A decompression bomb check has also been added to the affected function.

Pillow before 9.2.0 performs Improper Handling of Highly Compressed GIF Data (Data Amplification).

Pillow 8.2.0 includes a fix for CVE-2021-25287: There is an out-of-bounds read in J2kDecode, in j2ku_graya_la.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

Pillow version 8.2.0 includes a fix for CVE-2021-28678: For BLP data, BlpImagePlugin did not properly check that reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be run a large number of times on empty data.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28678-fix-blp-dos

Pillow 8.1.1 includes a fix for CVE-2021-27922: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICNS container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Affected versions of the pyasn1 package are vulnerable to Denial of Service (DoS) due to uncontrolled recursion when decoding deeply nested ASN.1 data. The vulnerability exists in the BER decoder’s indefLenValueDecoder, valueDecoder, and _decodeComponentsSchemaless code paths, where decodeFun is recursively invoked for nested SEQUENCE, SET, SEQUENCE OF, and SET OF elements without enforcing a recursion-depth limit.

Pyyaml version 5.4 includes a fix for CVE-2020-14343: A vulnerability was discovered in the PyYAML library in versions before 5.4, where it is susceptible to arbitrary code execution when it processes untrusted YAML files through the full_load method or with the FullLoader loader. Applications that use the library to process untrusted input may be vulnerable to this flaw. This flaw allows an attacker to execute arbitrary code on the system by abusing the python/object/new constructor. This flaw is due to an incomplete fix for CVE-2020-1747.
https://bugzilla.redhat.com/show_bug.cgi?id=1860466

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in inventory.
https://github.com/sphinx-doc/sphinx/issues/8175
https://github.com/sphinx-doc/sphinx/commit/f7b872e673f9b359a61fd287a7338a28077840d2

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in docstring.
https://github.com/sphinx-doc/sphinx/issues/8172
https://github.com/sphinx-doc/sphinx/commit/f00e75278c5999f40b214d8934357fbf0e705417

Affected versions of the sqlparse package are vulnerable to Denial of Service (DoS) due to missing hard limits on token grouping recursion depth and token processing when formatting very large SQL tuple lists. During sqlparse.format() processing, the sqlparse.engine.grouping._group_matching() and sqlparse.engine.grouping._group() functions can recurse and iterate over excessively large tlist.tokens without enforcing MAX_GROUPING_DEPTH or MAX_GROUPING_TOKENS, allowing grouping work to grow until it effectively hangs.

Affected versions of this package are vulnerable to Denial of Service (DoS) attacks due to Algorithmic Complexity. The SQL parser fails to enforce limits when processing deeply nested tuples and large token sequences, leading to excessive resource consumption through crafted SQL statements with extreme nesting depth or token counts.

**Note:** This issue is due to an incomplete fix for CVE-2024-4340.

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

Sqlparse 0.4.4 includes a fix for CVE-2023-30608: Parser contains a regular expression that is vulnerable to ReDOS (Regular Expression Denial of Service).
https://github.com/andialbrecht/sqlparse/security/advisories/GHSA-rrm6-wvj7-cwh2

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

Affected versions of the urllib3 package are vulnerable to Information Disclosure due to improper handling of sensitive headers during cross-origin redirects in the low-level proxy API. When following cross-origin redirects via ProxyManager.connection_from_url().urlopen() with assert_same_host=False, sensitive headers including Authorization, Cookie, and Proxy-Authorization are not stripped, unlike the high-level API, which removes them via Retry.DEFAULT_REMOVE_HEADERS_ON_REDIRECT. An attacker controlling a redirect target can capture these sensitive headers from requests that follow cross-origin redirects through the low-level proxy API path.

Urllib3 1.25.9 includes a fix for CVE-2020-26137: Urllib3 before 1.25.9 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of putrequest(). NOTE: this is similar to CVE-2020-26116.
https://github.com/python/cpython/issues/83784
https://github.com/urllib3/urllib3/pull/1800

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of urllib3 are vulnerable to an HTTP redirect handling vulnerability that fails to remove the HTTP request body when a POST changes to a GET via 301, 302, or 303 responses. This flaw can expose sensitive request data if the origin service is compromised and redirects to a malicious endpoint, though exploitability is low when no sensitive data is used. The vulnerability affects automatic redirect behavior. It is fixed in versions 1.26.18 and 2.0.7; update or disable redirects using redirects=False.
This vulnerability is specific to Python's urllib3 library.

Urllib3 1.26.17 and 2.0.5 include a fix for CVE-2023-43804: Urllib3 doesn't treat the 'Cookie' HTTP header special or provide any helpers for managing cookies over HTTP, that is the responsibility of the user. However, it is possible for a user to specify a 'Cookie' header and unknowingly leak information via HTTP redirects to a different origin if that user doesn't disable redirects explicitly.
https://github.com/urllib3/urllib3/security/advisories/GHSA-v845-jxx5-vc9f

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 1.26.5 includes a fix for CVE-2021-33503: When provided with a URL containing many @ characters in the authority component, the authority regular expression exhibits catastrophic backtracking, causing a denial of service if a URL were passed as a parameter or redirected to via an HTTP redirect.
https://github.com/advisories/GHSA-q2q7-5pp4-w6pg

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Ipython versions 8.0.1, 7.31.1, 7.16.3 and 5.11 include a fix for CVE-2022-21699: Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine.
https://github.com/ipython/ipython/security/advisories/GHSA-pq7m-3gw7-gq5x

IPython 8.10.0 includes a fix for CVE-2023-24816: Versions prior to 8.10.0 are subject to a command injection vulnerability with very specific prerequisites. This vulnerability requires that the function 'IPython.utils.terminal.set_term_title' be called on Windows in a Python environment where ctypes is not available. The dependency on 'ctypes' in 'IPython.utils._process_win32' prevents the vulnerable code from ever being reached in the ipython binary. However, as a library that could be used by another tool 'set_term_title' could be called and hence introduce a vulnerability. If an attacker get untrusted input to an instance of this function they would be able to inject shell commands as current process and limited to the scope of the current process. As a workaround, users should ensure that any calls to the 'IPython.utils.terminal.set_term_title' function are done with trusted or filtered input.
https://github.com/ipython/ipython/security/advisories/GHSA-29gw-9793-fvw7

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of the Werkzeug package are vulnerable to Denial of Service (DoS) due to improper handling of Windows special device names in the safe_join function. In Werkzeug versions before 3.1.4, safe_join permits path segments such as “CON” or “AUX” to pass validation, allowing send_from_directory to construct a path that resolves to a Windows device file, which opens successfully but then blocks indefinitely when read.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of the Werkzeug package are vulnerable to Denial of Service (DoS) due to improper handling of Windows special device names in path joining logic. The safe_join() function fails to reject device-name path segments when they are preceded by other segments (for example, example/NUL), and send_from_directory() relies on safe_join() when resolving user-supplied file paths.

Affected versions of the Werkzeug package are vulnerable to Improper Handling of Windows Device Names due to incomplete validation of Windows reserved device names in user-controlled path segments. In werkzeug.security.safe_join, path components ending with special device names (for example CON or AUX) are not reliably rejected when they include compound extensions (for example CON.txt.html) or trailing spaces, and werkzeug.utils.send_from_directory relies on safe_join when resolving a requested filename.

Affected versions of the gunicorn package are vulnerable to HTTP Request/Response Smuggling due to improper validation of the Transfer-Encoding header that enables a TE.CL desynchronisation condition. Gunicorn’s HTTP parser does not consistently enforce RFC semantics when parsing conflicting or unsupported request framing—such as messages containing both Transfer-Encoding and Content-Length—so the backend may fall back to Content-Length while an intermediary treats the message as chunked.

Gunicorn fails to properly validate Transfer-Encoding headers, leading to HTTP Request Smuggling (HRS) vulnerabilities. By crafting requests with conflicting Transfer-Encoding headers, attackers can bypass security restrictions and access restricted endpoints. This issue is due to Gunicorn's handling of Transfer-Encoding headers, where it incorrectly processes requests with multiple, conflicting Transfer-Encoding headers, treating them as chunked regardless of the final encoding specified. This vulnerability allows for a range of attacks including cache poisoning, session manipulation, and data exposure.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Affected versions of the requests package are vulnerable to Insecure Temporary File reuse due to predictable temporary filename generation in extract_zipped_paths(). The requests.utils.extract_zipped_paths() utility extracts files from zip archives into the system temporary directory using a deterministic path, and if that file already exists, the function reuses it without validating that it is the expected extracted content.

Affected versions of Requests are vulnerable to proxy credential leakage. When redirected to an HTTPS endpoint, the Proxy-Authorization header is forwarded to the destination server due to the use of rebuild_proxies to reattach the header. This may allow a malicious actor to exfiltrate sensitive information.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Sentry-sdk 1.4.1 includes a fix for a Race Condition vulnerability.
https://github.com/getsentry/sentry-python/pull/1203

Sentry-sdk 1.14.0 includes a fix for CVE-2023-28117: When using the Django integration of versions prior to 1.14.0 of the Sentry SDK in a specific configuration it is possible to leak sensitive cookies values, including the session cookie to Sentry. These sensitive cookies could then be used by someone with access to your Sentry issues to impersonate or escalate their privileges within your application. In order for these sensitive values to be leaked, the Sentry SDK configuration must have 'sendDefaultPII' set to 'True'; one must use a custom name for either 'SESSION_COOKIE_NAME' or 'CSRF_COOKIE_NAME' in one's Django settings; and one must not be configured in one's organization or project settings to use Sentry's data scrubbing features to account for the custom cookie names. As of version 1.14.0, the Django integration of the 'sentry-sdk' will detect the custom cookie names based on one's Django settings and will remove the values from the payload before sending the data to Sentry. As a workaround, use the SDK's filtering mechanism to remove the cookies from the payload that is sent to Sentry. For error events, this can be done with the 'before_send' callback method and for performance related events (transactions) one can use the 'before_send_transaction' callback method. Those who want to handle filtering of these values on the server-side can also use Sentry's advanced data scrubbing feature to account for the custom cookie names. Look for the '$http.cookies', '$http.headers', '$request.cookies', or '$request.headers' fields to target with a scrubbing rule.
https://github.com/getsentry/sentry-python/security/advisories/GHSA-29pr-6jr8-q5jm

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

Django-filter 2.4.0 includes a fix for CVE-2020-15225: In django-filter before version 2.4.0, automatically generated 'NumberFilter' instances, whose value was later converted to an integer, were subject to potential DoS from maliciously input using exponential format with sufficiently large exponents. Version 2.4.0+ applies a 'MaxValueValidator' with a a default 'limit_value' of 1e50 to the form field used by 'NumberFilter' instances. In addition, 'NumberFilter' implements the new 'get_max_validator()' which should return a configured validator instance to customise the limit, or else 'None' to disable the additional validation. Users may manually apply an equivalent validator if they are not able to upgrade.
https://github.com/carltongibson/django-filter/security/advisories/GHSA-x7gm-rfgv-w973

A SQL Injection issue in the SQL Panel in Jazzband Django Debug Toolbar before 1.11.1, 2.x before 2.2.1, and 3.x before 3.2.1 allows attackers to execute SQL statements by changing the raw_sql input field of the SQL explain, analyze, or select form. See CVE-2021-30459.

A flaw was found in Django REST Framework versions before 3.12.0 and before 3.11.2. When using the browseable API viewer, Django REST Framework fails to properly escape certain strings that can come from user input. This allows a user who can control those strings to inject malicious <script> tags, leading to a cross-site-scripting (XSS) vulnerability.

Affected versions of the package djangorestframework are vulnerable to Cross-site Scripting (XSS) via the break_long_headers template filter due to improper input sanitization before splitting and joining with <br> tags.

Django-celery-results through 1.2.1 stores task results in the database. Among the data it stores are the variables passed into the tasks. The variables may contain sensitive cleartext information that does not belong unencrypted in the database. See CVE-2020-17495.

Python Social Auth is a social authentication/registration mechanism. Prior to version 5.4.1, due to default case-insensitive collation in MySQL or MariaDB databases, third-party authentication user IDs are not case-sensitive and could cause different IDs to match. This issue has been addressed by a fix released in version 5.4.1. An immediate workaround would be to change collation of the affected field. See CVE-2024-32879.

Affected versions of the social-auth-app-django package are vulnerable to Authentication Bypass due to unintended email-based account association during the authentication pipeline. In social_django.storage.create_user (invoked by social_core.pipeline.user.create_user), an IntegrityError during user creation triggers a fallback that returns an existing User looked up by e-mail, effectively performing social_core.pipeline.social_auth.associate_by_email even when that step is disabled.

Rsa 4.7 includes a fix for CVE-2020-25658: It was found that python-rsa is vulnerable to Bleichenbacher timing attacks. An attacker can use this flaw via the RSA decryption API to decrypt parts of the cipher text encrypted with RSA.

Rsa 4.3 includes a fix for CVE-2020-13757: Python-RSA before 4.3 ignores leading '\0' bytes during decryption of ciphertext. This could conceivably have a security-relevant impact, e.g., by helping an attacker to infer that an application uses Python-RSA, or if the length of accepted ciphertext affects application behavior (such as by causing excessive memory allocation).

Affected versions of Idna are vulnerable to Denial Of Service via the idna.encode(), where a specially crafted argument could lead to significant resource consumption. In version 3.7, this function has been updated to reject such inputs efficiently, minimizing resource use. A practical workaround involves enforcing a maximum domain name length of 253 characters before encoding, as the vulnerability is triggered by unusually large inputs that normal operations wouldn't encounter.

Affected versions of the idna package are vulnerable to Denial of Service due to an incomplete fix for CVE-2024-3651 that still allows specially crafted inputs to consume significant resources during encoding. The idna.encode() function invokes the valid_contexto validator on every label before applying length-based rejection, so payloads such as long repetitions of the Arabic-Indic digit U+0660 or sequences of the Katakana middle dot U+30FB followed by a CJK character cause valid_contexto to perform extensive context-rule processing across each character. A remote attacker who can supply domain-name input to an application that calls idna.encode() without first enforcing the 253-character DNS length limit can submit arbitrarily large strings that drive the validator to exhaust CPU time, resulting in Denial of Service through resource consumption.

Kombu 5.2.1 updates Amazon sqs dependency 'urllib3' minimum version to 1.26.7 to include security fixes.
https://github.com/celery/kombu/commit/f3b04558fa0df4ecc383c93e0b3b300d95e17c47

Affected versions of this package are vulnerable to Insufficient Verification of Data Authenticity. The library does not validate the `crit` (Critical) Header Parameter as required by RFC 7515 §4.1.11 — when a JWT contains a `crit` array listing extensions that the library does not understand, the token is accepted instead of rejected. An attacker can exploit this vulnerability by crafting JWTs with unknown critical extensions (e.g., MFA requirements, token binding, scope restrictions) that are silently ignored, potentially bypassing security policies or causing split-brain verification in mixed-library deployments where other RFC-compliant libraries would reject the same token.

PyJWT 2.4.0 includes a fix for CVE-2022-29217: An attacker submitting the JWT token can choose the used signing algorithm. The PyJWT library requires that the application chooses what algorithms are supported. The application can specify 'jwt.algorithms.get_default_algorithms()' to get support for all algorithms, or specify a single algorithm. The issue is not that big as 'algorithms=jwt.algorithms.get_default_algorithms()' has to be used. As a workaround, always be explicit with the algorithms that are accepted and expected when decoding.

Celery 5.2.0 updates 'kombu' to v5.2.1, which includes dependencies updates that resolve security issues.

Celery 5.2.2 includes a fix for CVE-2021-23727: Celery before 5.2.2. by default trusts the messages and metadata stored in backends (result stores). When reading task metadata from the backend, the data is deserialized. Given that an attacker can gain access to, or somehow manipulate the metadata within a celery backend, they could trigger a stored command injection vulnerability and potentially gain further access to the system.

An issue was discovered in Django 4.2 before 4.2.21, 5.1 before 5.1.9, and 5.2 before 5.2.1. The django.utils.html.strip_tags() function is vulnerable to a potential denial-of-service (slow performance) when processing inputs containing large sequences of incomplete HTML tags. The template filter striptags is also vulnerable, because it is built on top of strip_tags().

A potential denial-of-service vulnerability has been identified in Django's urlize() and urlizetrunc() functions in django.utils.html. This vulnerability can be triggered by inputting huge strings containing a specific sequence of characters.

Affected versions of the Django package are vulnerable to Denial of Service (DoS) due to inefficient string concatenation when processing duplicate HTTP headers in ASGI mode. The ASGIRequest class combines repeated headers using repeated string concatenation, resulting in super-linear (quadratic) time complexity when processing requests with many duplicate headers.

Django 2.2.26, 3.2.11 and 4.0.1 include a fix for CVE-2021-45452: Storage.save in Django 2.2 before 2.2.26, 3.2 before 3.2.11, and 4.0 before 4.0.1 allows directory traversal if crafted filenames are directly passed to it.
https://www.djangoproject.com/weblog/2022/jan/04/security-releases/

An issue was discovered in Django 2.2 before 2.2.13 and 3.0 before 3.0.7. In cases where a memcached backend does not perform key validation, passing malformed cache keys could result in a key collision, and potential data leakage.

Affected versions of Django are vulnerable to Denial-of-Service via django.utils.text.Truncator. The django.utils.text.Truncator chars() and words() methods (when used with html=True) are subject to a potential DoS (denial of service) attack via certain inputs with very long, potentially malformed HTML text. The chars() and words() methods are used to implement the truncatechars_html and truncatewords_html template filters, which are thus also vulnerable. NOTE: this issue exists because of an incomplete fix for CVE-2019-14232.

Django 2.2.16, 3.0.10 and 3.1.1 include a fix for CVE-2020-24583: An issue was discovered in Django 2.2 before 2.2.16, 3.0 before 3.0.10, and 3.1 before 3.1.1 (when Python 3.7+ is used). FILE_UPLOAD_DIRECTORY_PERMISSIONS mode was not applied to intermediate-level directories created in the process of uploading files. It was also not applied to intermediate-level collected static directories when using the collectstatic management command.
#NOTE: This vulnerability affects only users of Python versions above 3.7.
https://www.djangoproject.com/weblog/2020/sep/01/security-releases

Affected versions of Django are vulnerable to potential regular expression denial-of-service (REDoS). django.utils.text.Truncator.words() method (with html=True) and truncatewords_html template filter were subject to a potential regular expression denial-of-service attack using a suitably crafted string (follow up to CVE-2019-14232 and CVE-2023-43665).

Affected versions of Django are affected by a potential denial-of-service vulnerability in the django.utils.html.urlize() function. The urlize and urlizetrunc template filters were susceptible to a denial-of-service attack via certain inputs containing many brackets. An attacker could exploit this vulnerability to cause significant delays or crashes in the affected application.

Django 4.2.7, 4.1.13 and 3.2.23 include a fix for CVE-2023-46695: Potential denial of service vulnerability in UsernameField on Windows.
https://www.djangoproject.com/weblog/2023/nov/01/security-releases

Affected versions of Django has a potential SQL injection vulnerability in the QuerySet.values() and QuerySet.values_list() methods. When used on models with a JSONField, these methods are susceptible to SQL injection through column aliases if a crafted JSON object key is passed as an argument.

Affected versions of Django are vulnerable to potential Denial of Service via certain inputs with a very large number of Unicode characters in django.utils.encoding.uri_to_iri().

Django 2.2.28, 3.2.13 and 4.0.4 include a fix for CVE-2022-28347: A SQL injection issue was discovered in QuerySet.explain() in Django 2.2 before 2.2.28, 3.2 before 3.2.13, and 4.0 before 4.0.4. This occurs by passing a crafted dictionary (with dictionary expansion) as the **options argument, and placing the injection payload in an option name.
https://www.djangoproject.com/weblog/2022/apr/11/security-releases

Django fixes a potential denial-of-service vulnerability in XML ``Deserializer``.

A security vulnerability has been discovered in certain versions of Django, affecting the password reset functionality. The PasswordResetForm class in django.contrib.auth.forms inadvertently allowed attackers to enumerate user email addresses by exploiting unhandled exceptions during the email sending process. This could be done by issuing password reset requests and observing the responses. Django has implemented a fix where these exceptions are now caught and logged using the django.contrib.auth logger, preventing potential information leakage through error responses.

Affected versions of the Django package are vulnerable to SQL Injection due to improper handling of column aliases containing periods in QuerySet.order_by() when combined with FilteredRelation. The QuerySet.order_by() method fails to properly sanitize column aliases that contain periods when the same alias is used in FilteredRelation via dictionary expansion. 
https://github.com/django/django/commit/90f5b10784ba5bf369caed87640e2b4394ea3314

Django 2.2.21, 3.1.9 and 3.2.1 include a fix for CVE-2021-31542: MultiPartParser, UploadedFile, and FieldFile allowed directory traversal via uploaded files with suitably crafted file names.
https://www.djangoproject.com/weblog/2021/may/04/security-releases

An issue was discovered in Django 2.2 before 2.2.13 and 3.0 before 3.0.7. Query parameters generated by the Django admin ForeignKeyRawIdWidget were not properly URL encoded, leading to a possibility of an XSS attack.

Affected versions of Django are vulnerable to potential denial-of-service in intcomma template filter when used with very long strings.

Django addresses a memory exhaustion issue in django.utils.numberformat.floatformat(). When floatformat receives a string representation of a number in scientific notation with a large exponent, it could lead to excessive memory consumption. To prevent this, decimals with more than 200 digits are now returned as-is.

In Django 3.2 before 3.2.16, 4.0 before 4.0.8, and 4.1 before 4.1.2, internationalized URLs were subject to a potential denial of service attack via the locale parameter, which is treated as a regular expression.

Affected versions of the `django` package are vulnerable to Download of Code Without Integrity Check due to improper handling of user-supplied input in the HTTP FileResponse class. The vulnerability arises because the Content-Disposition header of a FileResponse can be set using a filename derived from user input without sufficient validation. An attacker can exploit this by crafting a request that causes a file with malicious content to be downloaded, potentially executing arbitrary code on the client system when the file is opened.

Affected versions of the Django package are vulnerable to SQL Injection due to insufficient input sanitization in FilteredRelation column aliases. The FilteredRelation class fails to properly validate or escape column alias names when they are provided through dictionary expansion as keyword arguments to QuerySet.annotate() or QuerySet.alias() methods, allowing malicious SQL code to be injected directly into the generated database queries.

An issue was discovered in Django 2.2 before 2.2.16, 3.0 before 3.0.10, and 3.1 before 3.1.1 (when Python 3.7+ is used). The intermediate-level directories of the filesystem cache had the system's standard umask rather than 0o077.

Django versions 2.2.19, 3.0.13 and 3.1.7 include a fix for CVE-2021-23336: Web cache poisoning via 'django.utils.http.limited_parse_qsl()'. Django contains a copy of 'urllib.parse.parse_qsl' which was added to backport some security fixes. A further security fix has been issued recently such that 'parse_qsl(' no longer allows using ';' as a query parameter separator by default.

Django 2.2.27, 3.2.12 and 4.0.2 include a fix for CVE-2022-23833: Denial-of-service possibility in file uploads.
https://www.djangoproject.com/weblog/2022/feb/01/security-releases

In Django 2.2 before 2.2.20, 3.0 before 3.0.14, and 3.1 before 3.1.8, MultiPartParser allowed directory traversal via uploaded files with suitably crafted file names. Built-in upload handlers were not affected by this vulnerability.

CVE-2025-64458: Affected versions of the Django package are vulnerable to Denial of Service (DoS) due to slow Unicode NFKC normalization on Windows being applied to untrusted inputs. The django.contrib.auth.views.LoginView and django.contrib.auth.views.LogoutView, and django.views.i18n.set_language normalize user-controlled strings using Python’s NFKC algorithm, which is unusually slow on Windows for huge Unicode sequences and can be triggered to consume excessive CPU.

Django 2.2.26, 3.2.11 and 4.0.1 include a fix for CVE-2021-45115: UserAttributeSimilarityValidator incurred significant overhead in evaluating a submitted password that was artificially large in relation to the comparison values. In a situation where access to user registration was unrestricted, this provided a potential vector for a denial-of-service attack.
https://www.djangoproject.com/weblog/2022/jan/04/security-releases/

Django 4.1.7, 4.0.10 and 3.2.18 include a fix for CVE-2023-24580: Potential denial-of-service vulnerability in file uploads.
https://www.djangoproject.com/weblog/2023/feb/14/security-releases

Affected versions of Django are vulnerable to a potential denial-of-service (DoS) attack in the `django.utils.html.strip_tags()` method. The vulnerability occurs when the `strip_tags()` method or the `striptags` template filter processes inputs containing large sequences of nested, incomplete HTML entities.

Django affected versions are vulnerable to a potential SQL injection in the HasKey(lhs, rhs) lookup on Oracle databases. The vulnerability arises when untrusted data is directly used as the lhs value in the django.db.models.fields.json.HasKey lookup. However, applications using the jsonfield.has_key lookup with the __ syntax remain unaffected by this issue.

An issue was discovered in Django 5.2 before 5.2.3, 5.1 before 5.1.11, and 4.2 before 4.2.23. Internal HTTP response logging does not escape request.path, which allows remote attackers to potentially manipulate log output via crafted URLs. This may lead to log injection or forgery when logs are viewed in terminals or processed by external systems.

Django 2.2.18, 3.0.12 and 3.1.6 include a fix for CVE-2021-3281: The django.utils.archive.extract method (used by "startapp --template" and "startproject --template") allows directory traversal via an archive with absolute paths or relative paths with dot segments.

Affected versions of Django are vulnerable to a potential ReDoS (regular expression denial of service) in EmailValidator and URLValidator via a very large number of domain name labels of emails and URLs.

Django 2.2.26, 3.2.11 and 4.0.1 include a fix for CVE-2021-45116: An issue was discovered in Django 2.2 before 2.2.26, 3.2 before 3.2.11, and 4.0 before 4.0.1. Due to leveraging the Django Template Language's variable resolution logic, the dictsort template filter was potentially vulnerable to information disclosure, or an unintended method call, if passed a suitably crafted key.
https://www.djangoproject.com/weblog/2022/jan/04/security-releases

Django 2.2.24, 3.1.12, and 3.2.4 include a fix for CVE-2021-33571: In Django 2.2 before 2.2.24, 3.x before 3.1.12, and 3.2 before 3.2.4, URLValidator, validate_ipv4_address, and validate_ipv46_address do not prohibit leading zero characters in octal literals. This may allow a bypass of access control that is based on IP addresses. (validate_ipv4_address and validate_ipv46_address are unaffected with Python 3.9.5+).
https://www.djangoproject.com/weblog/2021/jun/02/security-releases

Django 3.2.14 and 4.0.6 include a fix for CVE-2022-34265: Potential SQL injection via Trunc(kind) and Extract(lookup_name) arguments.
https://www.djangoproject.com/weblog/2022/jul/04/security-releases

Affected versions of the Django package are vulnerable to Path Traversal due to improper validation of file paths in the django.contrib.admindocs module. The `TemplateDetailView` view allows staff members to verify the existence of arbitrary files by manipulating the file path. An attacker with staff privileges can exploit this vulnerability to check for the presence of files outside the template root directories, and if the `admindocs` templates are customized to display file contents, they can also access the contents of these files.

The {% debug %} template tag in Django 2.2 before 2.2.27, 3.2 before 3.2.12, and 4.0 before 4.0.2 does not properly encode the current context. This may lead to XSS.

Affected versions of Django are affected by a username enumeration vulnerability caused by timing differences in the django.contrib.auth.backends.ModelBackend.authenticate() method. This method allowed remote attackers to enumerate users through a timing attack involving login requests for users with unusable passwords. The timing difference in the authentication process exposed whether a username was valid or not, potentially aiding attackers in gaining unauthorized access.

Django has a potential denial-of-service vulnerability in django.utils.html.urlize() and AdminURLFieldWidget. The urlize and urlizetrunc functions, along with AdminURLFieldWidget, are vulnerable to denial-of-service attacks when handling inputs with a very large number of Unicode characters.

Django 4.2.1, 4.1.9 and 3.2.19 include a fix for CVE-2023-31047: In Django 3.2 before 3.2.19, 4.x before 4.1.9, and 4.2 before 4.2.1, it was possible to bypass validation when using one form field to upload multiple files. This multiple upload has never been supported by forms.FileField or forms.ImageField (only the last uploaded file was validated). However, Django's "Uploading multiple files" documentation suggested otherwise.
https://www.djangoproject.com/weblog/2023/may/03/security-releases

Django 2.2.28, 3.2.13 and 4.0.4 include a fix for CVE-2022-28346: An issue was discovered in Django 2.2 before 2.2.28, 3.2 before 3.2.13, and 4.0 before 4.0.4. QuerySet.annotate(), aggregate(), and extra() methods are subject to SQL injection in column aliases via a crafted dictionary (with dictionary expansion) as the passed **kwargs.
https://www.djangoproject.com/weblog/2022/apr/11/security-releases

Django 3.2.17, 4.0.9 and 4.1.6 includes a fix for CVE-2023-23969: In Django 3.2 before 3.2.17, 4.0 before 4.0.9, and 4.1 before 4.1.6, the parsed values of Accept-Language headers are cached in order to avoid repetitive parsing. This leads to a potential denial-of-service vector via excessive memory usage if the raw value of Accept-Language headers is very large.
https://www.djangoproject.com/weblog/2023/feb/01/security-releases

CVE-2025-64459: Affected versions of the Django package are vulnerable to SQL Injection due to improper input validation, allowing the internal _connector keyword argument to be accepted from untrusted dictionaries via expansion. The .filter(), .exclude(), and .get() methods on QuerySet, as well as the Q class, resolve **kwargs and will treat a supplied _connector value as the logical connector without constraining it to the expected set (AND/OR), permitting attacker-controlled tokens to influence SQL predicate construction.

Django fixes potential SQL injection in ``FilteredRelation`` column aliases on PostgreSQL.

Affected versions of the pillow package are vulnerable to Integer Overflow due to unchecked accumulation of glyph advance values while tracking the current rendering position during font processing. When a font supplies an excessively large advance for each glyph, the running position counter wraps around because the arithmetic is performed in a fixed-width integer type that cannot represent the resulting magnitude. A remote attacker who can supply a crafted font file to a target that uses Pillow's font rendering can trigger the overflow, leading to incorrect memory calculations and potential memory corruption.

Affected versions of the pillow package are vulnerable to Denial of Service due to an unbounded loop when traversing PDF cross-reference trailer chains without cycle detection. The PdfParser module follows Prev pointers in PDF trailers to read cross-reference sections, but it does not track previously processed offsets, so a trailer whose Prev pointer references its own offset or forms a longer cycle causes the parser to loop indefinitely. A remote attacker who supplies a crafted PDF document can cause the parsing process to hang, consuming 100% CPU and rendering the consuming application unresponsive.

Pillow 10.0.0 includes a fix for CVE-2023-44271: Denial of Service that uncontrollably allocates memory to process a given task, potentially causing a service to crash by having it run out of memory. This occurs for truetype in ImageFont when textlength in an ImageDraw instance operates on a long text argument.
https://github.com/python-pillow/Pillow/pull/7244

Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICO container, and thus an attempted memory allocation can be very large.

Pillow 10.3.0 introduces a security update addressing CVE-2024-28219 by replacing certain functions with strncpy to prevent buffer overflow issues.

Pillow 8.1.1 includes a fix for CVE-2021-25289: TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files because of certain interpretation conflicts with LibTIFF in RGBA mode. NOTE: this issue exists because of an incomplete fix for CVE-2020-35654.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow version 8.2.0 includes a fix for CVE-2021-28677: For EPS data, the readline implementation used in EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28677-fix-eps-dos-on-open

In libImaging/PcxDecode.c in Pillow before 7.1.0, an out-of-bounds read can occur when reading PCX files where state->shuffle is instructed to read beyond state->buffer.

Pillow 8.1.0 includes a fix for SGI Decode buffer overrun. CVE-2020-35655 #5173.

Pillow 8.1.0 fixes TIFF OOB Write error. CVE-2020-35654 #5175.

Pillow 8.3.0 includes a fix for CVE-2021-34552: Pillow through 8.2.0 and PIL (also known as Python Imaging Library) through 1.1.7 allow an attacker to pass controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.0.html#buffer-overflow
https://pillow.readthedocs.io/en/stable/releasenotes/index.html

Pillow 9.0.0 includes a fix for CVE-2022-22816: path_getbbox in path.c in Pillow before 9.0.0 has a buffer over-read during initialization of ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow version 8.2.0 includes a fix for CVE-2021-28676: For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28676-fix-fli-dos

Pillow 9.0.1 includes a fix for CVE-2022-22817: PIL.ImageMath.eval in Pillow before 9.0.0 allows evaluation of arbitrary expressions, such as ones that use the Python exec method. A first patch was issued for version 9.0.0 but it did not prevent builtins available to lambda expressions.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.1.html#security

Pillow 9.0.0 includes a fix for CVE-2022-22815: path_getbbox in path.c in Pillow before 9.0.0 improperly initializes ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow before 7.1.0 has multiple out-of-bounds reads in libImaging/FliDecode.c.

In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a number of out-of-bounds reads exist in the parsing of SGI image files, a different issue than CVE-2020-5311.

In Pillow before 7.1.0, there are two Buffer Overflows in libImaging/TiffDecode.c.

Pillow 8.2.0 includes a fix for CVE-2021-25288: There is an out-of-bounds read in J2kDecode, in j2ku_gray_i.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

Pillow 8.1.1 includes a fix for CVE-2021-25292: The PDF parser allows a regular expression DoS (ReDoS) attack via a crafted PDF file because of a catastrophic backtracking regex.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow before 9.0.1 allows attackers to delete files because spaces in temporary pathnames are mishandled.

Pillow 9.0.0 excludes carriage return in PDF regex to help prevent ReDoS.
https://github.com/python-pillow/Pillow/pull/5912
https://github.com/python-pillow/Pillow/commit/43b800d933c996226e4d7df00c33fcbe46d97363

Pillow 10.0.1 updates its C dependency 'libwebp' to 1.3.2 to include a fix for a high-risk vulnerability.
https://pillow.readthedocs.io/en/stable/releasenotes/10.0.1.html

Pillow 8.1.1 includes a fix for CVE-2021-25293: There is an out-of-bounds read in SGIRleDecode.c.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0, there are multiple out-of-bounds reads via a crafted JP2 file.

In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the user-supplied stride value is trusted for buffer calculations.

Pillow 8.1.1 includes a fix for CVE-2021-27921: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for a BLP container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the number of input layers relative to the size of the data block. This could lead to a DoS on Image.open prior to Image.load.

Pillow is affected by an arbitrary code execution vulnerability. If an attacker has control over the keys passed to the environment argument of PIL.ImageMath.eval(), they may be able to execute arbitrary code.
https://pillow.readthedocs.io/en/stable/releasenotes/10.2.0.html

Pillow from 5.2.0 and before 8.3.2 is vulnerable to Regular Expression Denial of Service (ReDoS) via the getrgb function.
https://github.com/python-pillow/Pillow/commit/9e08eb8f78fdfd2f476e1b20b7cf38683754866b
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.2.html

Pillow 8.1.1 includes a fix for CVE-2021-25291: In TiffDecode.c, there is an out-of-bounds read in TiffreadRGBATile via invalid tile boundaries.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-25290: In TiffDecode.c, there is a negative-offset memcpy with an invalid size.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.0.1 updates 'FreeType' used in binary wheels to v2.10.4 to include a security fix.

Pillow 9.0.0 ensures JpegImagePlugin stops at the end of a truncated file to avoid Denial of Service attacks.
https://github.com/python-pillow/Pillow/pull/5921
https://github.com/advisories/GHSA-4fx9-vc88-q2xc

Pillow is potentially vulnerable to DoS attacks through PIL.ImageFont.ImageFont.getmask(). A decompression bomb check has also been added to the affected function.

Pillow before 9.2.0 performs Improper Handling of Highly Compressed GIF Data (Data Amplification).

Pillow 8.2.0 includes a fix for CVE-2021-25287: There is an out-of-bounds read in J2kDecode, in j2ku_graya_la.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

Pillow version 8.2.0 includes a fix for CVE-2021-28678: For BLP data, BlpImagePlugin did not properly check that reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be run a large number of times on empty data.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28678-fix-blp-dos

Pillow 8.1.1 includes a fix for CVE-2021-27922: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICNS container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Affected versions of the pyasn1 package are vulnerable to Denial of Service (DoS) due to uncontrolled recursion when decoding deeply nested ASN.1 data. The vulnerability exists in the BER decoder’s indefLenValueDecoder, valueDecoder, and _decodeComponentsSchemaless code paths, where decodeFun is recursively invoked for nested SEQUENCE, SET, SEQUENCE OF, and SET OF elements without enforcing a recursion-depth limit.

Pyyaml version 5.4 includes a fix for CVE-2020-14343: A vulnerability was discovered in the PyYAML library in versions before 5.4, where it is susceptible to arbitrary code execution when it processes untrusted YAML files through the full_load method or with the FullLoader loader. Applications that use the library to process untrusted input may be vulnerable to this flaw. This flaw allows an attacker to execute arbitrary code on the system by abusing the python/object/new constructor. This flaw is due to an incomplete fix for CVE-2020-1747.
https://bugzilla.redhat.com/show_bug.cgi?id=1860466

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in inventory.
https://github.com/sphinx-doc/sphinx/issues/8175
https://github.com/sphinx-doc/sphinx/commit/f7b872e673f9b359a61fd287a7338a28077840d2

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in docstring.
https://github.com/sphinx-doc/sphinx/issues/8172
https://github.com/sphinx-doc/sphinx/commit/f00e75278c5999f40b214d8934357fbf0e705417

Affected versions of the sqlparse package are vulnerable to Denial of Service (DoS) due to missing hard limits on token grouping recursion depth and token processing when formatting very large SQL tuple lists. During sqlparse.format() processing, the sqlparse.engine.grouping._group_matching() and sqlparse.engine.grouping._group() functions can recurse and iterate over excessively large tlist.tokens without enforcing MAX_GROUPING_DEPTH or MAX_GROUPING_TOKENS, allowing grouping work to grow until it effectively hangs.

Affected versions of this package are vulnerable to Denial of Service (DoS) attacks due to Algorithmic Complexity. The SQL parser fails to enforce limits when processing deeply nested tuples and large token sequences, leading to excessive resource consumption through crafted SQL statements with extreme nesting depth or token counts.

**Note:** This issue is due to an incomplete fix for CVE-2024-4340.

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

Sqlparse 0.4.4 includes a fix for CVE-2023-30608: Parser contains a regular expression that is vulnerable to ReDOS (Regular Expression Denial of Service).
https://github.com/andialbrecht/sqlparse/security/advisories/GHSA-rrm6-wvj7-cwh2

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

Affected versions of the urllib3 package are vulnerable to Information Disclosure due to improper handling of sensitive headers during cross-origin redirects in the low-level proxy API. When following cross-origin redirects via ProxyManager.connection_from_url().urlopen() with assert_same_host=False, sensitive headers including Authorization, Cookie, and Proxy-Authorization are not stripped, unlike the high-level API, which removes them via Retry.DEFAULT_REMOVE_HEADERS_ON_REDIRECT. An attacker controlling a redirect target can capture these sensitive headers from requests that follow cross-origin redirects through the low-level proxy API path.

Urllib3 1.25.9 includes a fix for CVE-2020-26137: Urllib3 before 1.25.9 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of putrequest(). NOTE: this is similar to CVE-2020-26116.
https://github.com/python/cpython/issues/83784
https://github.com/urllib3/urllib3/pull/1800

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of urllib3 are vulnerable to an HTTP redirect handling vulnerability that fails to remove the HTTP request body when a POST changes to a GET via 301, 302, or 303 responses. This flaw can expose sensitive request data if the origin service is compromised and redirects to a malicious endpoint, though exploitability is low when no sensitive data is used. The vulnerability affects automatic redirect behavior. It is fixed in versions 1.26.18 and 2.0.7; update or disable redirects using redirects=False.
This vulnerability is specific to Python's urllib3 library.

Urllib3 1.26.17 and 2.0.5 include a fix for CVE-2023-43804: Urllib3 doesn't treat the 'Cookie' HTTP header special or provide any helpers for managing cookies over HTTP, that is the responsibility of the user. However, it is possible for a user to specify a 'Cookie' header and unknowingly leak information via HTTP redirects to a different origin if that user doesn't disable redirects explicitly.
https://github.com/urllib3/urllib3/security/advisories/GHSA-v845-jxx5-vc9f

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 1.26.5 includes a fix for CVE-2021-33503: When provided with a URL containing many @ characters in the authority component, the authority regular expression exhibits catastrophic backtracking, causing a denial of service if a URL were passed as a parameter or redirected to via an HTTP redirect.
https://github.com/advisories/GHSA-q2q7-5pp4-w6pg

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Ipython versions 8.0.1, 7.31.1, 7.16.3 and 5.11 include a fix for CVE-2022-21699: Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine.
https://github.com/ipython/ipython/security/advisories/GHSA-pq7m-3gw7-gq5x

IPython 8.10.0 includes a fix for CVE-2023-24816: Versions prior to 8.10.0 are subject to a command injection vulnerability with very specific prerequisites. This vulnerability requires that the function 'IPython.utils.terminal.set_term_title' be called on Windows in a Python environment where ctypes is not available. The dependency on 'ctypes' in 'IPython.utils._process_win32' prevents the vulnerable code from ever being reached in the ipython binary. However, as a library that could be used by another tool 'set_term_title' could be called and hence introduce a vulnerability. If an attacker get untrusted input to an instance of this function they would be able to inject shell commands as current process and limited to the scope of the current process. As a workaround, users should ensure that any calls to the 'IPython.utils.terminal.set_term_title' function are done with trusted or filtered input.
https://github.com/ipython/ipython/security/advisories/GHSA-29gw-9793-fvw7

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of the Werkzeug package are vulnerable to Denial of Service (DoS) due to improper handling of Windows special device names in the safe_join function. In Werkzeug versions before 3.1.4, safe_join permits path segments such as “CON” or “AUX” to pass validation, allowing send_from_directory to construct a path that resolves to a Windows device file, which opens successfully but then blocks indefinitely when read.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of the Werkzeug package are vulnerable to Denial of Service (DoS) due to improper handling of Windows special device names in path joining logic. The safe_join() function fails to reject device-name path segments when they are preceded by other segments (for example, example/NUL), and send_from_directory() relies on safe_join() when resolving user-supplied file paths.

Affected versions of the Werkzeug package are vulnerable to Improper Handling of Windows Device Names due to incomplete validation of Windows reserved device names in user-controlled path segments. In werkzeug.security.safe_join, path components ending with special device names (for example CON or AUX) are not reliably rejected when they include compound extensions (for example CON.txt.html) or trailing spaces, and werkzeug.utils.send_from_directory relies on safe_join when resolving a requested filename.

Affected versions of the gunicorn package are vulnerable to HTTP Request/Response Smuggling due to improper validation of the Transfer-Encoding header that enables a TE.CL desynchronisation condition. Gunicorn’s HTTP parser does not consistently enforce RFC semantics when parsing conflicting or unsupported request framing—such as messages containing both Transfer-Encoding and Content-Length—so the backend may fall back to Content-Length while an intermediary treats the message as chunked.

Gunicorn fails to properly validate Transfer-Encoding headers, leading to HTTP Request Smuggling (HRS) vulnerabilities. By crafting requests with conflicting Transfer-Encoding headers, attackers can bypass security restrictions and access restricted endpoints. This issue is due to Gunicorn's handling of Transfer-Encoding headers, where it incorrectly processes requests with multiple, conflicting Transfer-Encoding headers, treating them as chunked regardless of the final encoding specified. This vulnerability allows for a range of attacks including cache poisoning, session manipulation, and data exposure.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Affected versions of the requests package are vulnerable to Insecure Temporary File reuse due to predictable temporary filename generation in extract_zipped_paths(). The requests.utils.extract_zipped_paths() utility extracts files from zip archives into the system temporary directory using a deterministic path, and if that file already exists, the function reuses it without validating that it is the expected extracted content.

Affected versions of Requests are vulnerable to proxy credential leakage. When redirected to an HTTPS endpoint, the Proxy-Authorization header is forwarded to the destination server due to the use of rebuild_proxies to reattach the header. This may allow a malicious actor to exfiltrate sensitive information.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Sentry-sdk 1.4.1 includes a fix for a Race Condition vulnerability.
https://github.com/getsentry/sentry-python/pull/1203

Sentry-sdk 1.14.0 includes a fix for CVE-2023-28117: When using the Django integration of versions prior to 1.14.0 of the Sentry SDK in a specific configuration it is possible to leak sensitive cookies values, including the session cookie to Sentry. These sensitive cookies could then be used by someone with access to your Sentry issues to impersonate or escalate their privileges within your application. In order for these sensitive values to be leaked, the Sentry SDK configuration must have 'sendDefaultPII' set to 'True'; one must use a custom name for either 'SESSION_COOKIE_NAME' or 'CSRF_COOKIE_NAME' in one's Django settings; and one must not be configured in one's organization or project settings to use Sentry's data scrubbing features to account for the custom cookie names. As of version 1.14.0, the Django integration of the 'sentry-sdk' will detect the custom cookie names based on one's Django settings and will remove the values from the payload before sending the data to Sentry. As a workaround, use the SDK's filtering mechanism to remove the cookies from the payload that is sent to Sentry. For error events, this can be done with the 'before_send' callback method and for performance related events (transactions) one can use the 'before_send_transaction' callback method. Those who want to handle filtering of these values on the server-side can also use Sentry's advanced data scrubbing feature to account for the custom cookie names. Look for the '$http.cookies', '$http.headers', '$request.cookies', or '$request.headers' fields to target with a scrubbing rule.
https://github.com/getsentry/sentry-python/security/advisories/GHSA-29pr-6jr8-q5jm

Certifi 2022.12.07 includes a fix for CVE-2022-23491: Certifi 2022.12.07 removes root certificates from "TrustCor" from the root store. These are in the process of being removed from Mozilla's trust store. TrustCor's root certificates are being removed pursuant to an investigation prompted by media reporting that TrustCor's ownership also operated a business that produced spyware. Conclusions of Mozilla's investigation can be found in the linked google group discussion.

Certifi 2023.07.22 includes a fix for CVE-2023-37920: Certifi prior to version 2023.07.22 recognizes "e-Tugra" root certificates. e-Tugra's root certificates were subject to an investigation prompted by reporting of security issues in their systems. Certifi 2023.07.22 removes root certificates from "e-Tugra" from the root store.
https://github.com/certifi/python-certifi/security/advisories/GHSA-xqr8-7jwr-rhp7

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

Django-filter 2.4.0 includes a fix for CVE-2020-15225: In django-filter before version 2.4.0, automatically generated 'NumberFilter' instances, whose value was later converted to an integer, were subject to potential DoS from maliciously input using exponential format with sufficiently large exponents. Version 2.4.0+ applies a 'MaxValueValidator' with a a default 'limit_value' of 1e50 to the form field used by 'NumberFilter' instances. In addition, 'NumberFilter' implements the new 'get_max_validator()' which should return a configured validator instance to customise the limit, or else 'None' to disable the additional validation. Users may manually apply an equivalent validator if they are not able to upgrade.
https://github.com/carltongibson/django-filter/security/advisories/GHSA-x7gm-rfgv-w973

A SQL Injection issue in the SQL Panel in Jazzband Django Debug Toolbar before 1.11.1, 2.x before 2.2.1, and 3.x before 3.2.1 allows attackers to execute SQL statements by changing the raw_sql input field of the SQL explain, analyze, or select form. See CVE-2021-30459.

A flaw was found in Django REST Framework versions before 3.12.0 and before 3.11.2. When using the browseable API viewer, Django REST Framework fails to properly escape certain strings that can come from user input. This allows a user who can control those strings to inject malicious <script> tags, leading to a cross-site-scripting (XSS) vulnerability.

Affected versions of the package djangorestframework are vulnerable to Cross-site Scripting (XSS) via the break_long_headers template filter due to improper input sanitization before splitting and joining with <br> tags.

Django-celery-results through 1.2.1 stores task results in the database. Among the data it stores are the variables passed into the tasks. The variables may contain sensitive cleartext information that does not belong unencrypted in the database. See CVE-2020-17495.

Python Social Auth is a social authentication/registration mechanism. Prior to version 5.4.1, due to default case-insensitive collation in MySQL or MariaDB databases, third-party authentication user IDs are not case-sensitive and could cause different IDs to match. This issue has been addressed by a fix released in version 5.4.1. An immediate workaround would be to change collation of the affected field. See CVE-2024-32879.

Affected versions of the social-auth-app-django package are vulnerable to Authentication Bypass due to unintended email-based account association during the authentication pipeline. In social_django.storage.create_user (invoked by social_core.pipeline.user.create_user), an IntegrityError during user creation triggers a fallback that returns an existing User looked up by e-mail, effectively performing social_core.pipeline.social_auth.associate_by_email even when that step is disabled.

Rsa 4.7 includes a fix for CVE-2020-25658: It was found that python-rsa is vulnerable to Bleichenbacher timing attacks. An attacker can use this flaw via the RSA decryption API to decrypt parts of the cipher text encrypted with RSA.

Rsa 4.3 includes a fix for CVE-2020-13757: Python-RSA before 4.3 ignores leading '\0' bytes during decryption of ciphertext. This could conceivably have a security-relevant impact, e.g., by helping an attacker to infer that an application uses Python-RSA, or if the length of accepted ciphertext affects application behavior (such as by causing excessive memory allocation).

Affected versions of this package are vulnerable to Insufficient Verification of Data Authenticity. The library does not validate the `crit` (Critical) Header Parameter as required by RFC 7515 §4.1.11 — when a JWT contains a `crit` array listing extensions that the library does not understand, the token is accepted instead of rejected. An attacker can exploit this vulnerability by crafting JWTs with unknown critical extensions (e.g., MFA requirements, token binding, scope restrictions) that are silently ignored, potentially bypassing security policies or causing split-brain verification in mixed-library deployments where other RFC-compliant libraries would reject the same token.

PyJWT 2.4.0 includes a fix for CVE-2022-29217: An attacker submitting the JWT token can choose the used signing algorithm. The PyJWT library requires that the application chooses what algorithms are supported. The application can specify 'jwt.algorithms.get_default_algorithms()' to get support for all algorithms, or specify a single algorithm. The issue is not that big as 'algorithms=jwt.algorithms.get_default_algorithms()' has to be used. As a workaround, always be explicit with the algorithms that are accepted and expected when decoding.

Affected versions of the pyasn1 package are vulnerable to Denial of Service (DoS) due to uncontrolled recursion when decoding deeply nested ASN.1 data. The vulnerability exists in the BER decoder’s indefLenValueDecoder, valueDecoder, and _decodeComponentsSchemaless code paths, where decodeFun is recursively invoked for nested SEQUENCE, SET, SEQUENCE OF, and SET OF elements without enforcing a recursion-depth limit.

Pyyaml version 5.4 includes a fix for CVE-2020-14343: A vulnerability was discovered in the PyYAML library in versions before 5.4, where it is susceptible to arbitrary code execution when it processes untrusted YAML files through the full_load method or with the FullLoader loader. Applications that use the library to process untrusted input may be vulnerable to this flaw. This flaw allows an attacker to execute arbitrary code on the system by abusing the python/object/new constructor. This flaw is due to an incomplete fix for CVE-2020-1747.
https://bugzilla.redhat.com/show_bug.cgi?id=1860466

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in inventory.
https://github.com/sphinx-doc/sphinx/issues/8175
https://github.com/sphinx-doc/sphinx/commit/f7b872e673f9b359a61fd287a7338a28077840d2

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in docstring.
https://github.com/sphinx-doc/sphinx/issues/8172
https://github.com/sphinx-doc/sphinx/commit/f00e75278c5999f40b214d8934357fbf0e705417

Affected versions of the sqlparse package are vulnerable to Denial of Service (DoS) due to missing hard limits on token grouping recursion depth and token processing when formatting very large SQL tuple lists. During sqlparse.format() processing, the sqlparse.engine.grouping._group_matching() and sqlparse.engine.grouping._group() functions can recurse and iterate over excessively large tlist.tokens without enforcing MAX_GROUPING_DEPTH or MAX_GROUPING_TOKENS, allowing grouping work to grow until it effectively hangs.

Affected versions of this package are vulnerable to Denial of Service (DoS) attacks due to Algorithmic Complexity. The SQL parser fails to enforce limits when processing deeply nested tuples and large token sequences, leading to excessive resource consumption through crafted SQL statements with extreme nesting depth or token counts.

**Note:** This issue is due to an incomplete fix for CVE-2024-4340.

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

Sqlparse 0.4.4 includes a fix for CVE-2023-30608: Parser contains a regular expression that is vulnerable to ReDOS (Regular Expression Denial of Service).
https://github.com/andialbrecht/sqlparse/security/advisories/GHSA-rrm6-wvj7-cwh2

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

Affected versions of the urllib3 package are vulnerable to Information Disclosure due to improper handling of sensitive headers during cross-origin redirects in the low-level proxy API. When following cross-origin redirects via ProxyManager.connection_from_url().urlopen() with assert_same_host=False, sensitive headers including Authorization, Cookie, and Proxy-Authorization are not stripped, unlike the high-level API, which removes them via Retry.DEFAULT_REMOVE_HEADERS_ON_REDIRECT. An attacker controlling a redirect target can capture these sensitive headers from requests that follow cross-origin redirects through the low-level proxy API path.

Urllib3 1.25.9 includes a fix for CVE-2020-26137: Urllib3 before 1.25.9 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of putrequest(). NOTE: this is similar to CVE-2020-26116.
https://github.com/python/cpython/issues/83784
https://github.com/urllib3/urllib3/pull/1800

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of urllib3 are vulnerable to an HTTP redirect handling vulnerability that fails to remove the HTTP request body when a POST changes to a GET via 301, 302, or 303 responses. This flaw can expose sensitive request data if the origin service is compromised and redirects to a malicious endpoint, though exploitability is low when no sensitive data is used. The vulnerability affects automatic redirect behavior. It is fixed in versions 1.26.18 and 2.0.7; update or disable redirects using redirects=False.
This vulnerability is specific to Python's urllib3 library.

Urllib3 1.26.17 and 2.0.5 include a fix for CVE-2023-43804: Urllib3 doesn't treat the 'Cookie' HTTP header special or provide any helpers for managing cookies over HTTP, that is the responsibility of the user. However, it is possible for a user to specify a 'Cookie' header and unknowingly leak information via HTTP redirects to a different origin if that user doesn't disable redirects explicitly.
https://github.com/urllib3/urllib3/security/advisories/GHSA-v845-jxx5-vc9f

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 1.26.5 includes a fix for CVE-2021-33503: When provided with a URL containing many @ characters in the authority component, the authority regular expression exhibits catastrophic backtracking, causing a denial of service if a URL were passed as a parameter or redirected to via an HTTP redirect.
https://github.com/advisories/GHSA-q2q7-5pp4-w6pg

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Ipython versions 8.0.1, 7.31.1, 7.16.3 and 5.11 include a fix for CVE-2022-21699: Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine.
https://github.com/ipython/ipython/security/advisories/GHSA-pq7m-3gw7-gq5x

IPython 8.10.0 includes a fix for CVE-2023-24816: Versions prior to 8.10.0 are subject to a command injection vulnerability with very specific prerequisites. This vulnerability requires that the function 'IPython.utils.terminal.set_term_title' be called on Windows in a Python environment where ctypes is not available. The dependency on 'ctypes' in 'IPython.utils._process_win32' prevents the vulnerable code from ever being reached in the ipython binary. However, as a library that could be used by another tool 'set_term_title' could be called and hence introduce a vulnerability. If an attacker get untrusted input to an instance of this function they would be able to inject shell commands as current process and limited to the scope of the current process. As a workaround, users should ensure that any calls to the 'IPython.utils.terminal.set_term_title' function are done with trusted or filtered input.
https://github.com/ipython/ipython/security/advisories/GHSA-29gw-9793-fvw7

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of the Werkzeug package are vulnerable to Denial of Service (DoS) due to improper handling of Windows special device names in the safe_join function. In Werkzeug versions before 3.1.4, safe_join permits path segments such as “CON” or “AUX” to pass validation, allowing send_from_directory to construct a path that resolves to a Windows device file, which opens successfully but then blocks indefinitely when read.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of the Werkzeug package are vulnerable to Denial of Service (DoS) due to improper handling of Windows special device names in path joining logic. The safe_join() function fails to reject device-name path segments when they are preceded by other segments (for example, example/NUL), and send_from_directory() relies on safe_join() when resolving user-supplied file paths.

Affected versions of the Werkzeug package are vulnerable to Improper Handling of Windows Device Names due to incomplete validation of Windows reserved device names in user-controlled path segments. In werkzeug.security.safe_join, path components ending with special device names (for example CON or AUX) are not reliably rejected when they include compound extensions (for example CON.txt.html) or trailing spaces, and werkzeug.utils.send_from_directory relies on safe_join when resolving a requested filename.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Affected versions of the requests package are vulnerable to Insecure Temporary File reuse due to predictable temporary filename generation in extract_zipped_paths(). The requests.utils.extract_zipped_paths() utility extracts files from zip archives into the system temporary directory using a deterministic path, and if that file already exists, the function reuses it without validating that it is the expected extracted content.

Affected versions of Requests are vulnerable to proxy credential leakage. When redirected to an HTTPS endpoint, the Proxy-Authorization header is forwarded to the destination server due to the use of rebuild_proxies to reattach the header. This may allow a malicious actor to exfiltrate sensitive information.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Sentry-sdk 1.4.1 includes a fix for a Race Condition vulnerability.
https://github.com/getsentry/sentry-python/pull/1203

Sentry-sdk 1.14.0 includes a fix for CVE-2023-28117: When using the Django integration of versions prior to 1.14.0 of the Sentry SDK in a specific configuration it is possible to leak sensitive cookies values, including the session cookie to Sentry. These sensitive cookies could then be used by someone with access to your Sentry issues to impersonate or escalate their privileges within your application. In order for these sensitive values to be leaked, the Sentry SDK configuration must have 'sendDefaultPII' set to 'True'; one must use a custom name for either 'SESSION_COOKIE_NAME' or 'CSRF_COOKIE_NAME' in one's Django settings; and one must not be configured in one's organization or project settings to use Sentry's data scrubbing features to account for the custom cookie names. As of version 1.14.0, the Django integration of the 'sentry-sdk' will detect the custom cookie names based on one's Django settings and will remove the values from the payload before sending the data to Sentry. As a workaround, use the SDK's filtering mechanism to remove the cookies from the payload that is sent to Sentry. For error events, this can be done with the 'before_send' callback method and for performance related events (transactions) one can use the 'before_send_transaction' callback method. Those who want to handle filtering of these values on the server-side can also use Sentry's advanced data scrubbing feature to account for the custom cookie names. Look for the '$http.cookies', '$http.headers', '$request.cookies', or '$request.headers' fields to target with a scrubbing rule.
https://github.com/getsentry/sentry-python/security/advisories/GHSA-29pr-6jr8-q5jm

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

A SQL Injection issue in the SQL Panel in Jazzband Django Debug Toolbar before 1.11.1, 2.x before 2.2.1, and 3.x before 3.2.1 allows attackers to execute SQL statements by changing the raw_sql input field of the SQL explain, analyze, or select form. See CVE-2021-30459.

Python Social Auth is a social authentication/registration mechanism. Prior to version 5.4.1, due to default case-insensitive collation in MySQL or MariaDB databases, third-party authentication user IDs are not case-sensitive and could cause different IDs to match. This issue has been addressed by a fix released in version 5.4.1. An immediate workaround would be to change collation of the affected field. See CVE-2024-32879.

Affected versions of the social-auth-app-django package are vulnerable to Authentication Bypass due to unintended email-based account association during the authentication pipeline. In social_django.storage.create_user (invoked by social_core.pipeline.user.create_user), an IntegrityError during user creation triggers a fallback that returns an existing User looked up by e-mail, effectively performing social_core.pipeline.social_auth.associate_by_email even when that step is disabled.

Rsa 4.7 includes a fix for CVE-2020-25658: It was found that python-rsa is vulnerable to Bleichenbacher timing attacks. An attacker can use this flaw via the RSA decryption API to decrypt parts of the cipher text encrypted with RSA.

Rsa 4.3 includes a fix for CVE-2020-13757: Python-RSA before 4.3 ignores leading '\0' bytes during decryption of ciphertext. This could conceivably have a security-relevant impact, e.g., by helping an attacker to infer that an application uses Python-RSA, or if the length of accepted ciphertext affects application behavior (such as by causing excessive memory allocation).

Affected versions of Idna are vulnerable to Denial Of Service via the idna.encode(), where a specially crafted argument could lead to significant resource consumption. In version 3.7, this function has been updated to reject such inputs efficiently, minimizing resource use. A practical workaround involves enforcing a maximum domain name length of 253 characters before encoding, as the vulnerability is triggered by unusually large inputs that normal operations wouldn't encounter.

Affected versions of the idna package are vulnerable to Denial of Service due to an incomplete fix for CVE-2024-3651 that still allows specially crafted inputs to consume significant resources during encoding. The idna.encode() function invokes the valid_contexto validator on every label before applying length-based rejection, so payloads such as long repetitions of the Arabic-Indic digit U+0660 or sequences of the Katakana middle dot U+30FB followed by a CJK character cause valid_contexto to perform extensive context-rule processing across each character. A remote attacker who can supply domain-name input to an application that calls idna.encode() without first enforcing the 253-character DNS length limit can submit arbitrarily large strings that drive the validator to exhaust CPU time, resulting in Denial of Service through resource consumption.

Kombu 5.2.1 updates Amazon sqs dependency 'urllib3' minimum version to 1.26.7 to include security fixes.
https://github.com/celery/kombu/commit/f3b04558fa0df4ecc383c93e0b3b300d95e17c47

Affected versions of this package are vulnerable to Insufficient Verification of Data Authenticity. The library does not validate the `crit` (Critical) Header Parameter as required by RFC 7515 §4.1.11 — when a JWT contains a `crit` array listing extensions that the library does not understand, the token is accepted instead of rejected. An attacker can exploit this vulnerability by crafting JWTs with unknown critical extensions (e.g., MFA requirements, token binding, scope restrictions) that are silently ignored, potentially bypassing security policies or causing split-brain verification in mixed-library deployments where other RFC-compliant libraries would reject the same token.

PyJWT 2.4.0 includes a fix for CVE-2022-29217: An attacker submitting the JWT token can choose the used signing algorithm. The PyJWT library requires that the application chooses what algorithms are supported. The application can specify 'jwt.algorithms.get_default_algorithms()' to get support for all algorithms, or specify a single algorithm. The issue is not that big as 'algorithms=jwt.algorithms.get_default_algorithms()' has to be used. As a workaround, always be explicit with the algorithms that are accepted and expected when decoding.

An issue was discovered in Django 4.2 before 4.2.21, 5.1 before 5.1.9, and 5.2 before 5.2.1. The django.utils.html.strip_tags() function is vulnerable to a potential denial-of-service (slow performance) when processing inputs containing large sequences of incomplete HTML tags. The template filter striptags is also vulnerable, because it is built on top of strip_tags().

A potential denial-of-service vulnerability has been identified in Django's urlize() and urlizetrunc() functions in django.utils.html. This vulnerability can be triggered by inputting huge strings containing a specific sequence of characters.

Affected versions of the Django package are vulnerable to Denial of Service (DoS) due to inefficient string concatenation when processing duplicate HTTP headers in ASGI mode. The ASGIRequest class combines repeated headers using repeated string concatenation, resulting in super-linear (quadratic) time complexity when processing requests with many duplicate headers.

Django 2.2.26, 3.2.11 and 4.0.1 include a fix for CVE-2021-45452: Storage.save in Django 2.2 before 2.2.26, 3.2 before 3.2.11, and 4.0 before 4.0.1 allows directory traversal if crafted filenames are directly passed to it.
https://www.djangoproject.com/weblog/2022/jan/04/security-releases/

An issue was discovered in Django 2.2 before 2.2.13 and 3.0 before 3.0.7. In cases where a memcached backend does not perform key validation, passing malformed cache keys could result in a key collision, and potential data leakage.

Affected versions of Django are vulnerable to Denial-of-Service via django.utils.text.Truncator. The django.utils.text.Truncator chars() and words() methods (when used with html=True) are subject to a potential DoS (denial of service) attack via certain inputs with very long, potentially malformed HTML text. The chars() and words() methods are used to implement the truncatechars_html and truncatewords_html template filters, which are thus also vulnerable. NOTE: this issue exists because of an incomplete fix for CVE-2019-14232.

Django 2.2.16, 3.0.10 and 3.1.1 include a fix for CVE-2020-24583: An issue was discovered in Django 2.2 before 2.2.16, 3.0 before 3.0.10, and 3.1 before 3.1.1 (when Python 3.7+ is used). FILE_UPLOAD_DIRECTORY_PERMISSIONS mode was not applied to intermediate-level directories created in the process of uploading files. It was also not applied to intermediate-level collected static directories when using the collectstatic management command.
#NOTE: This vulnerability affects only users of Python versions above 3.7.
https://www.djangoproject.com/weblog/2020/sep/01/security-releases

Affected versions of Django are vulnerable to potential regular expression denial-of-service (REDoS). django.utils.text.Truncator.words() method (with html=True) and truncatewords_html template filter were subject to a potential regular expression denial-of-service attack using a suitably crafted string (follow up to CVE-2019-14232 and CVE-2023-43665).

Affected versions of Django are affected by a potential denial-of-service vulnerability in the django.utils.html.urlize() function. The urlize and urlizetrunc template filters were susceptible to a denial-of-service attack via certain inputs containing many brackets. An attacker could exploit this vulnerability to cause significant delays or crashes in the affected application.

Django 4.2.7, 4.1.13 and 3.2.23 include a fix for CVE-2023-46695: Potential denial of service vulnerability in UsernameField on Windows.
https://www.djangoproject.com/weblog/2023/nov/01/security-releases

Affected versions of Django has a potential SQL injection vulnerability in the QuerySet.values() and QuerySet.values_list() methods. When used on models with a JSONField, these methods are susceptible to SQL injection through column aliases if a crafted JSON object key is passed as an argument.

Affected versions of Django are vulnerable to potential Denial of Service via certain inputs with a very large number of Unicode characters in django.utils.encoding.uri_to_iri().

Django 2.2.28, 3.2.13 and 4.0.4 include a fix for CVE-2022-28347: A SQL injection issue was discovered in QuerySet.explain() in Django 2.2 before 2.2.28, 3.2 before 3.2.13, and 4.0 before 4.0.4. This occurs by passing a crafted dictionary (with dictionary expansion) as the **options argument, and placing the injection payload in an option name.
https://www.djangoproject.com/weblog/2022/apr/11/security-releases

Django fixes a potential denial-of-service vulnerability in XML ``Deserializer``.

A security vulnerability has been discovered in certain versions of Django, affecting the password reset functionality. The PasswordResetForm class in django.contrib.auth.forms inadvertently allowed attackers to enumerate user email addresses by exploiting unhandled exceptions during the email sending process. This could be done by issuing password reset requests and observing the responses. Django has implemented a fix where these exceptions are now caught and logged using the django.contrib.auth logger, preventing potential information leakage through error responses.

Affected versions of the Django package are vulnerable to SQL Injection due to improper handling of column aliases containing periods in QuerySet.order_by() when combined with FilteredRelation. The QuerySet.order_by() method fails to properly sanitize column aliases that contain periods when the same alias is used in FilteredRelation via dictionary expansion. 
https://github.com/django/django/commit/90f5b10784ba5bf369caed87640e2b4394ea3314

Django 2.2.21, 3.1.9 and 3.2.1 include a fix for CVE-2021-31542: MultiPartParser, UploadedFile, and FieldFile allowed directory traversal via uploaded files with suitably crafted file names.
https://www.djangoproject.com/weblog/2021/may/04/security-releases

An issue was discovered in Django 2.2 before 2.2.13 and 3.0 before 3.0.7. Query parameters generated by the Django admin ForeignKeyRawIdWidget were not properly URL encoded, leading to a possibility of an XSS attack.

Affected versions of Django are vulnerable to potential denial-of-service in intcomma template filter when used with very long strings.

Django addresses a memory exhaustion issue in django.utils.numberformat.floatformat(). When floatformat receives a string representation of a number in scientific notation with a large exponent, it could lead to excessive memory consumption. To prevent this, decimals with more than 200 digits are now returned as-is.

In Django 3.2 before 3.2.16, 4.0 before 4.0.8, and 4.1 before 4.1.2, internationalized URLs were subject to a potential denial of service attack via the locale parameter, which is treated as a regular expression.

Affected versions of the `django` package are vulnerable to Download of Code Without Integrity Check due to improper handling of user-supplied input in the HTTP FileResponse class. The vulnerability arises because the Content-Disposition header of a FileResponse can be set using a filename derived from user input without sufficient validation. An attacker can exploit this by crafting a request that causes a file with malicious content to be downloaded, potentially executing arbitrary code on the client system when the file is opened.

Affected versions of the Django package are vulnerable to SQL Injection due to insufficient input sanitization in FilteredRelation column aliases. The FilteredRelation class fails to properly validate or escape column alias names when they are provided through dictionary expansion as keyword arguments to QuerySet.annotate() or QuerySet.alias() methods, allowing malicious SQL code to be injected directly into the generated database queries.

An issue was discovered in Django 2.2 before 2.2.16, 3.0 before 3.0.10, and 3.1 before 3.1.1 (when Python 3.7+ is used). The intermediate-level directories of the filesystem cache had the system's standard umask rather than 0o077.

Django versions 2.2.19, 3.0.13 and 3.1.7 include a fix for CVE-2021-23336: Web cache poisoning via 'django.utils.http.limited_parse_qsl()'. Django contains a copy of 'urllib.parse.parse_qsl' which was added to backport some security fixes. A further security fix has been issued recently such that 'parse_qsl(' no longer allows using ';' as a query parameter separator by default.

Django 2.2.27, 3.2.12 and 4.0.2 include a fix for CVE-2022-23833: Denial-of-service possibility in file uploads.
https://www.djangoproject.com/weblog/2022/feb/01/security-releases

In Django 2.2 before 2.2.20, 3.0 before 3.0.14, and 3.1 before 3.1.8, MultiPartParser allowed directory traversal via uploaded files with suitably crafted file names. Built-in upload handlers were not affected by this vulnerability.

CVE-2025-64458: Affected versions of the Django package are vulnerable to Denial of Service (DoS) due to slow Unicode NFKC normalization on Windows being applied to untrusted inputs. The django.contrib.auth.views.LoginView and django.contrib.auth.views.LogoutView, and django.views.i18n.set_language normalize user-controlled strings using Python’s NFKC algorithm, which is unusually slow on Windows for huge Unicode sequences and can be triggered to consume excessive CPU.

Django 2.2.26, 3.2.11 and 4.0.1 include a fix for CVE-2021-45115: UserAttributeSimilarityValidator incurred significant overhead in evaluating a submitted password that was artificially large in relation to the comparison values. In a situation where access to user registration was unrestricted, this provided a potential vector for a denial-of-service attack.
https://www.djangoproject.com/weblog/2022/jan/04/security-releases/

Django 4.1.7, 4.0.10 and 3.2.18 include a fix for CVE-2023-24580: Potential denial-of-service vulnerability in file uploads.
https://www.djangoproject.com/weblog/2023/feb/14/security-releases

Affected versions of Django are vulnerable to a potential denial-of-service (DoS) attack in the `django.utils.html.strip_tags()` method. The vulnerability occurs when the `strip_tags()` method or the `striptags` template filter processes inputs containing large sequences of nested, incomplete HTML entities.

Django affected versions are vulnerable to a potential SQL injection in the HasKey(lhs, rhs) lookup on Oracle databases. The vulnerability arises when untrusted data is directly used as the lhs value in the django.db.models.fields.json.HasKey lookup. However, applications using the jsonfield.has_key lookup with the __ syntax remain unaffected by this issue.

An issue was discovered in Django 5.2 before 5.2.3, 5.1 before 5.1.11, and 4.2 before 4.2.23. Internal HTTP response logging does not escape request.path, which allows remote attackers to potentially manipulate log output via crafted URLs. This may lead to log injection or forgery when logs are viewed in terminals or processed by external systems.

Django 2.2.18, 3.0.12 and 3.1.6 include a fix for CVE-2021-3281: The django.utils.archive.extract method (used by "startapp --template" and "startproject --template") allows directory traversal via an archive with absolute paths or relative paths with dot segments.

Affected versions of Django are vulnerable to a potential ReDoS (regular expression denial of service) in EmailValidator and URLValidator via a very large number of domain name labels of emails and URLs.

Django 2.2.26, 3.2.11 and 4.0.1 include a fix for CVE-2021-45116: An issue was discovered in Django 2.2 before 2.2.26, 3.2 before 3.2.11, and 4.0 before 4.0.1. Due to leveraging the Django Template Language's variable resolution logic, the dictsort template filter was potentially vulnerable to information disclosure, or an unintended method call, if passed a suitably crafted key.
https://www.djangoproject.com/weblog/2022/jan/04/security-releases

Django 2.2.24, 3.1.12, and 3.2.4 include a fix for CVE-2021-33571: In Django 2.2 before 2.2.24, 3.x before 3.1.12, and 3.2 before 3.2.4, URLValidator, validate_ipv4_address, and validate_ipv46_address do not prohibit leading zero characters in octal literals. This may allow a bypass of access control that is based on IP addresses. (validate_ipv4_address and validate_ipv46_address are unaffected with Python 3.9.5+).
https://www.djangoproject.com/weblog/2021/jun/02/security-releases

Django 3.2.14 and 4.0.6 include a fix for CVE-2022-34265: Potential SQL injection via Trunc(kind) and Extract(lookup_name) arguments.
https://www.djangoproject.com/weblog/2022/jul/04/security-releases

Affected versions of the Django package are vulnerable to Path Traversal due to improper validation of file paths in the django.contrib.admindocs module. The `TemplateDetailView` view allows staff members to verify the existence of arbitrary files by manipulating the file path. An attacker with staff privileges can exploit this vulnerability to check for the presence of files outside the template root directories, and if the `admindocs` templates are customized to display file contents, they can also access the contents of these files.

The {% debug %} template tag in Django 2.2 before 2.2.27, 3.2 before 3.2.12, and 4.0 before 4.0.2 does not properly encode the current context. This may lead to XSS.

Affected versions of Django are affected by a username enumeration vulnerability caused by timing differences in the django.contrib.auth.backends.ModelBackend.authenticate() method. This method allowed remote attackers to enumerate users through a timing attack involving login requests for users with unusable passwords. The timing difference in the authentication process exposed whether a username was valid or not, potentially aiding attackers in gaining unauthorized access.

Django has a potential denial-of-service vulnerability in django.utils.html.urlize() and AdminURLFieldWidget. The urlize and urlizetrunc functions, along with AdminURLFieldWidget, are vulnerable to denial-of-service attacks when handling inputs with a very large number of Unicode characters.

Django 4.2.1, 4.1.9 and 3.2.19 include a fix for CVE-2023-31047: In Django 3.2 before 3.2.19, 4.x before 4.1.9, and 4.2 before 4.2.1, it was possible to bypass validation when using one form field to upload multiple files. This multiple upload has never been supported by forms.FileField or forms.ImageField (only the last uploaded file was validated). However, Django's "Uploading multiple files" documentation suggested otherwise.
https://www.djangoproject.com/weblog/2023/may/03/security-releases

Django 2.2.28, 3.2.13 and 4.0.4 include a fix for CVE-2022-28346: An issue was discovered in Django 2.2 before 2.2.28, 3.2 before 3.2.13, and 4.0 before 4.0.4. QuerySet.annotate(), aggregate(), and extra() methods are subject to SQL injection in column aliases via a crafted dictionary (with dictionary expansion) as the passed **kwargs.
https://www.djangoproject.com/weblog/2022/apr/11/security-releases

Django 3.2.17, 4.0.9 and 4.1.6 includes a fix for CVE-2023-23969: In Django 3.2 before 3.2.17, 4.0 before 4.0.9, and 4.1 before 4.1.6, the parsed values of Accept-Language headers are cached in order to avoid repetitive parsing. This leads to a potential denial-of-service vector via excessive memory usage if the raw value of Accept-Language headers is very large.
https://www.djangoproject.com/weblog/2023/feb/01/security-releases

CVE-2025-64459: Affected versions of the Django package are vulnerable to SQL Injection due to improper input validation, allowing the internal _connector keyword argument to be accepted from untrusted dictionaries via expansion. The .filter(), .exclude(), and .get() methods on QuerySet, as well as the Q class, resolve **kwargs and will treat a supplied _connector value as the logical connector without constraining it to the expected set (AND/OR), permitting attacker-controlled tokens to influence SQL predicate construction.

Django fixes potential SQL injection in ``FilteredRelation`` column aliases on PostgreSQL.

Affected versions of the pillow package are vulnerable to Integer Overflow due to unchecked accumulation of glyph advance values while tracking the current rendering position during font processing. When a font supplies an excessively large advance for each glyph, the running position counter wraps around because the arithmetic is performed in a fixed-width integer type that cannot represent the resulting magnitude. A remote attacker who can supply a crafted font file to a target that uses Pillow's font rendering can trigger the overflow, leading to incorrect memory calculations and potential memory corruption.

Affected versions of the pillow package are vulnerable to Denial of Service due to an unbounded loop when traversing PDF cross-reference trailer chains without cycle detection. The PdfParser module follows Prev pointers in PDF trailers to read cross-reference sections, but it does not track previously processed offsets, so a trailer whose Prev pointer references its own offset or forms a longer cycle causes the parser to loop indefinitely. A remote attacker who supplies a crafted PDF document can cause the parsing process to hang, consuming 100% CPU and rendering the consuming application unresponsive.

Pillow 10.0.0 includes a fix for CVE-2023-44271: Denial of Service that uncontrollably allocates memory to process a given task, potentially causing a service to crash by having it run out of memory. This occurs for truetype in ImageFont when textlength in an ImageDraw instance operates on a long text argument.
https://github.com/python-pillow/Pillow/pull/7244

Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICO container, and thus an attempted memory allocation can be very large.

Pillow 10.3.0 introduces a security update addressing CVE-2024-28219 by replacing certain functions with strncpy to prevent buffer overflow issues.

Pillow 8.1.1 includes a fix for CVE-2021-25289: TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files because of certain interpretation conflicts with LibTIFF in RGBA mode. NOTE: this issue exists because of an incomplete fix for CVE-2020-35654.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow version 8.2.0 includes a fix for CVE-2021-28677: For EPS data, the readline implementation used in EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28677-fix-eps-dos-on-open

In libImaging/PcxDecode.c in Pillow before 7.1.0, an out-of-bounds read can occur when reading PCX files where state->shuffle is instructed to read beyond state->buffer.

Pillow 8.1.0 includes a fix for SGI Decode buffer overrun. CVE-2020-35655 #5173.

Pillow 8.1.0 fixes TIFF OOB Write error. CVE-2020-35654 #5175.

Pillow 8.3.0 includes a fix for CVE-2021-34552: Pillow through 8.2.0 and PIL (also known as Python Imaging Library) through 1.1.7 allow an attacker to pass controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.0.html#buffer-overflow
https://pillow.readthedocs.io/en/stable/releasenotes/index.html

Pillow 9.0.0 includes a fix for CVE-2022-22816: path_getbbox in path.c in Pillow before 9.0.0 has a buffer over-read during initialization of ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow version 8.2.0 includes a fix for CVE-2021-28676: For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28676-fix-fli-dos

Pillow 9.0.1 includes a fix for CVE-2022-22817: PIL.ImageMath.eval in Pillow before 9.0.0 allows evaluation of arbitrary expressions, such as ones that use the Python exec method. A first patch was issued for version 9.0.0 but it did not prevent builtins available to lambda expressions.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.1.html#security

Pillow 9.0.0 includes a fix for CVE-2022-22815: path_getbbox in path.c in Pillow before 9.0.0 improperly initializes ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow before 7.1.0 has multiple out-of-bounds reads in libImaging/FliDecode.c.

In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a number of out-of-bounds reads exist in the parsing of SGI image files, a different issue than CVE-2020-5311.

In Pillow before 7.1.0, there are two Buffer Overflows in libImaging/TiffDecode.c.

Pillow 8.2.0 includes a fix for CVE-2021-25288: There is an out-of-bounds read in J2kDecode, in j2ku_gray_i.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

Pillow 8.1.1 includes a fix for CVE-2021-25292: The PDF parser allows a regular expression DoS (ReDoS) attack via a crafted PDF file because of a catastrophic backtracking regex.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow before 9.0.1 allows attackers to delete files because spaces in temporary pathnames are mishandled.

Pillow 9.0.0 excludes carriage return in PDF regex to help prevent ReDoS.
https://github.com/python-pillow/Pillow/pull/5912
https://github.com/python-pillow/Pillow/commit/43b800d933c996226e4d7df00c33fcbe46d97363

Pillow 10.0.1 updates its C dependency 'libwebp' to 1.3.2 to include a fix for a high-risk vulnerability.
https://pillow.readthedocs.io/en/stable/releasenotes/10.0.1.html

Pillow 8.1.1 includes a fix for CVE-2021-25293: There is an out-of-bounds read in SGIRleDecode.c.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0, there are multiple out-of-bounds reads via a crafted JP2 file.

In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the user-supplied stride value is trusted for buffer calculations.

Pillow 8.1.1 includes a fix for CVE-2021-27921: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for a BLP container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the number of input layers relative to the size of the data block. This could lead to a DoS on Image.open prior to Image.load.

Pillow is affected by an arbitrary code execution vulnerability. If an attacker has control over the keys passed to the environment argument of PIL.ImageMath.eval(), they may be able to execute arbitrary code.
https://pillow.readthedocs.io/en/stable/releasenotes/10.2.0.html

Pillow from 5.2.0 and before 8.3.2 is vulnerable to Regular Expression Denial of Service (ReDoS) via the getrgb function.
https://github.com/python-pillow/Pillow/commit/9e08eb8f78fdfd2f476e1b20b7cf38683754866b
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.2.html

Pillow 8.1.1 includes a fix for CVE-2021-25291: In TiffDecode.c, there is an out-of-bounds read in TiffreadRGBATile via invalid tile boundaries.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-25290: In TiffDecode.c, there is a negative-offset memcpy with an invalid size.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.0.1 updates 'FreeType' used in binary wheels to v2.10.4 to include a security fix.

Pillow 9.0.0 ensures JpegImagePlugin stops at the end of a truncated file to avoid Denial of Service attacks.
https://github.com/python-pillow/Pillow/pull/5921
https://github.com/advisories/GHSA-4fx9-vc88-q2xc

Pillow is potentially vulnerable to DoS attacks through PIL.ImageFont.ImageFont.getmask(). A decompression bomb check has also been added to the affected function.

Pillow before 9.2.0 performs Improper Handling of Highly Compressed GIF Data (Data Amplification).

Pillow 8.2.0 includes a fix for CVE-2021-25287: There is an out-of-bounds read in J2kDecode, in j2ku_graya_la.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

Pillow version 8.2.0 includes a fix for CVE-2021-28678: For BLP data, BlpImagePlugin did not properly check that reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be run a large number of times on empty data.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28678-fix-blp-dos

Pillow 8.1.1 includes a fix for CVE-2021-27922: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICNS container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Affected versions of the pyasn1 package are vulnerable to Denial of Service (DoS) due to uncontrolled recursion when decoding deeply nested ASN.1 data. The vulnerability exists in the BER decoder’s indefLenValueDecoder, valueDecoder, and _decodeComponentsSchemaless code paths, where decodeFun is recursively invoked for nested SEQUENCE, SET, SEQUENCE OF, and SET OF elements without enforcing a recursion-depth limit.

Pyyaml version 5.4 includes a fix for CVE-2020-14343: A vulnerability was discovered in the PyYAML library in versions before 5.4, where it is susceptible to arbitrary code execution when it processes untrusted YAML files through the full_load method or with the FullLoader loader. Applications that use the library to process untrusted input may be vulnerable to this flaw. This flaw allows an attacker to execute arbitrary code on the system by abusing the python/object/new constructor. This flaw is due to an incomplete fix for CVE-2020-1747.
https://bugzilla.redhat.com/show_bug.cgi?id=1860466

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in inventory.
https://github.com/sphinx-doc/sphinx/issues/8175
https://github.com/sphinx-doc/sphinx/commit/f7b872e673f9b359a61fd287a7338a28077840d2

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in docstring.
https://github.com/sphinx-doc/sphinx/issues/8172
https://github.com/sphinx-doc/sphinx/commit/f00e75278c5999f40b214d8934357fbf0e705417

Affected versions of the sqlparse package are vulnerable to Denial of Service (DoS) due to missing hard limits on token grouping recursion depth and token processing when formatting very large SQL tuple lists. During sqlparse.format() processing, the sqlparse.engine.grouping._group_matching() and sqlparse.engine.grouping._group() functions can recurse and iterate over excessively large tlist.tokens without enforcing MAX_GROUPING_DEPTH or MAX_GROUPING_TOKENS, allowing grouping work to grow until it effectively hangs.

Affected versions of this package are vulnerable to Denial of Service (DoS) attacks due to Algorithmic Complexity. The SQL parser fails to enforce limits when processing deeply nested tuples and large token sequences, leading to excessive resource consumption through crafted SQL statements with extreme nesting depth or token counts.

**Note:** This issue is due to an incomplete fix for CVE-2024-4340.

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

Sqlparse 0.4.4 includes a fix for CVE-2023-30608: Parser contains a regular expression that is vulnerable to ReDOS (Regular Expression Denial of Service).
https://github.com/andialbrecht/sqlparse/security/advisories/GHSA-rrm6-wvj7-cwh2

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

Affected versions of the urllib3 package are vulnerable to Information Disclosure due to improper handling of sensitive headers during cross-origin redirects in the low-level proxy API. When following cross-origin redirects via ProxyManager.connection_from_url().urlopen() with assert_same_host=False, sensitive headers including Authorization, Cookie, and Proxy-Authorization are not stripped, unlike the high-level API, which removes them via Retry.DEFAULT_REMOVE_HEADERS_ON_REDIRECT. An attacker controlling a redirect target can capture these sensitive headers from requests that follow cross-origin redirects through the low-level proxy API path.

Urllib3 1.25.9 includes a fix for CVE-2020-26137: Urllib3 before 1.25.9 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of putrequest(). NOTE: this is similar to CVE-2020-26116.
https://github.com/python/cpython/issues/83784
https://github.com/urllib3/urllib3/pull/1800

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of urllib3 are vulnerable to an HTTP redirect handling vulnerability that fails to remove the HTTP request body when a POST changes to a GET via 301, 302, or 303 responses. This flaw can expose sensitive request data if the origin service is compromised and redirects to a malicious endpoint, though exploitability is low when no sensitive data is used. The vulnerability affects automatic redirect behavior. It is fixed in versions 1.26.18 and 2.0.7; update or disable redirects using redirects=False.
This vulnerability is specific to Python's urllib3 library.

Urllib3 1.26.17 and 2.0.5 include a fix for CVE-2023-43804: Urllib3 doesn't treat the 'Cookie' HTTP header special or provide any helpers for managing cookies over HTTP, that is the responsibility of the user. However, it is possible for a user to specify a 'Cookie' header and unknowingly leak information via HTTP redirects to a different origin if that user doesn't disable redirects explicitly.
https://github.com/urllib3/urllib3/security/advisories/GHSA-v845-jxx5-vc9f

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 1.26.5 includes a fix for CVE-2021-33503: When provided with a URL containing many @ characters in the authority component, the authority regular expression exhibits catastrophic backtracking, causing a denial of service if a URL were passed as a parameter or redirected to via an HTTP redirect.
https://github.com/advisories/GHSA-q2q7-5pp4-w6pg

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Ipython versions 8.0.1, 7.31.1, 7.16.3 and 5.11 include a fix for CVE-2022-21699: Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine.
https://github.com/ipython/ipython/security/advisories/GHSA-pq7m-3gw7-gq5x

IPython 8.10.0 includes a fix for CVE-2023-24816: Versions prior to 8.10.0 are subject to a command injection vulnerability with very specific prerequisites. This vulnerability requires that the function 'IPython.utils.terminal.set_term_title' be called on Windows in a Python environment where ctypes is not available. The dependency on 'ctypes' in 'IPython.utils._process_win32' prevents the vulnerable code from ever being reached in the ipython binary. However, as a library that could be used by another tool 'set_term_title' could be called and hence introduce a vulnerability. If an attacker get untrusted input to an instance of this function they would be able to inject shell commands as current process and limited to the scope of the current process. As a workaround, users should ensure that any calls to the 'IPython.utils.terminal.set_term_title' function are done with trusted or filtered input.
https://github.com/ipython/ipython/security/advisories/GHSA-29gw-9793-fvw7

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of the Werkzeug package are vulnerable to Denial of Service (DoS) due to improper handling of Windows special device names in the safe_join function. In Werkzeug versions before 3.1.4, safe_join permits path segments such as “CON” or “AUX” to pass validation, allowing send_from_directory to construct a path that resolves to a Windows device file, which opens successfully but then blocks indefinitely when read.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of the Werkzeug package are vulnerable to Denial of Service (DoS) due to improper handling of Windows special device names in path joining logic. The safe_join() function fails to reject device-name path segments when they are preceded by other segments (for example, example/NUL), and send_from_directory() relies on safe_join() when resolving user-supplied file paths.

Affected versions of the Werkzeug package are vulnerable to Improper Handling of Windows Device Names due to incomplete validation of Windows reserved device names in user-controlled path segments. In werkzeug.security.safe_join, path components ending with special device names (for example CON or AUX) are not reliably rejected when they include compound extensions (for example CON.txt.html) or trailing spaces, and werkzeug.utils.send_from_directory relies on safe_join when resolving a requested filename.

Affected versions of the gunicorn package are vulnerable to HTTP Request/Response Smuggling due to improper validation of the Transfer-Encoding header that enables a TE.CL desynchronisation condition. Gunicorn’s HTTP parser does not consistently enforce RFC semantics when parsing conflicting or unsupported request framing—such as messages containing both Transfer-Encoding and Content-Length—so the backend may fall back to Content-Length while an intermediary treats the message as chunked.

Gunicorn fails to properly validate Transfer-Encoding headers, leading to HTTP Request Smuggling (HRS) vulnerabilities. By crafting requests with conflicting Transfer-Encoding headers, attackers can bypass security restrictions and access restricted endpoints. This issue is due to Gunicorn's handling of Transfer-Encoding headers, where it incorrectly processes requests with multiple, conflicting Transfer-Encoding headers, treating them as chunked regardless of the final encoding specified. This vulnerability allows for a range of attacks including cache poisoning, session manipulation, and data exposure.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Affected versions of the requests package are vulnerable to Insecure Temporary File reuse due to predictable temporary filename generation in extract_zipped_paths(). The requests.utils.extract_zipped_paths() utility extracts files from zip archives into the system temporary directory using a deterministic path, and if that file already exists, the function reuses it without validating that it is the expected extracted content.

Affected versions of Requests are vulnerable to proxy credential leakage. When redirected to an HTTPS endpoint, the Proxy-Authorization header is forwarded to the destination server due to the use of rebuild_proxies to reattach the header. This may allow a malicious actor to exfiltrate sensitive information.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Sentry-sdk 1.4.1 includes a fix for a Race Condition vulnerability.
https://github.com/getsentry/sentry-python/pull/1203

Sentry-sdk 1.14.0 includes a fix for CVE-2023-28117: When using the Django integration of versions prior to 1.14.0 of the Sentry SDK in a specific configuration it is possible to leak sensitive cookies values, including the session cookie to Sentry. These sensitive cookies could then be used by someone with access to your Sentry issues to impersonate or escalate their privileges within your application. In order for these sensitive values to be leaked, the Sentry SDK configuration must have 'sendDefaultPII' set to 'True'; one must use a custom name for either 'SESSION_COOKIE_NAME' or 'CSRF_COOKIE_NAME' in one's Django settings; and one must not be configured in one's organization or project settings to use Sentry's data scrubbing features to account for the custom cookie names. As of version 1.14.0, the Django integration of the 'sentry-sdk' will detect the custom cookie names based on one's Django settings and will remove the values from the payload before sending the data to Sentry. As a workaround, use the SDK's filtering mechanism to remove the cookies from the payload that is sent to Sentry. For error events, this can be done with the 'before_send' callback method and for performance related events (transactions) one can use the 'before_send_transaction' callback method. Those who want to handle filtering of these values on the server-side can also use Sentry's advanced data scrubbing feature to account for the custom cookie names. Look for the '$http.cookies', '$http.headers', '$request.cookies', or '$request.headers' fields to target with a scrubbing rule.
https://github.com/getsentry/sentry-python/security/advisories/GHSA-29pr-6jr8-q5jm

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

Django-filter 2.4.0 includes a fix for CVE-2020-15225: In django-filter before version 2.4.0, automatically generated 'NumberFilter' instances, whose value was later converted to an integer, were subject to potential DoS from maliciously input using exponential format with sufficiently large exponents. Version 2.4.0+ applies a 'MaxValueValidator' with a a default 'limit_value' of 1e50 to the form field used by 'NumberFilter' instances. In addition, 'NumberFilter' implements the new 'get_max_validator()' which should return a configured validator instance to customise the limit, or else 'None' to disable the additional validation. Users may manually apply an equivalent validator if they are not able to upgrade.
https://github.com/carltongibson/django-filter/security/advisories/GHSA-x7gm-rfgv-w973

A SQL Injection issue in the SQL Panel in Jazzband Django Debug Toolbar before 1.11.1, 2.x before 2.2.1, and 3.x before 3.2.1 allows attackers to execute SQL statements by changing the raw_sql input field of the SQL explain, analyze, or select form. See CVE-2021-30459.

A flaw was found in Django REST Framework versions before 3.12.0 and before 3.11.2. When using the browseable API viewer, Django REST Framework fails to properly escape certain strings that can come from user input. This allows a user who can control those strings to inject malicious <script> tags, leading to a cross-site-scripting (XSS) vulnerability.

Affected versions of the package djangorestframework are vulnerable to Cross-site Scripting (XSS) via the break_long_headers template filter due to improper input sanitization before splitting and joining with <br> tags.

Django-celery-results through 1.2.1 stores task results in the database. Among the data it stores are the variables passed into the tasks. The variables may contain sensitive cleartext information that does not belong unencrypted in the database. See CVE-2020-17495.

Python Social Auth is a social authentication/registration mechanism. Prior to version 5.4.1, due to default case-insensitive collation in MySQL or MariaDB databases, third-party authentication user IDs are not case-sensitive and could cause different IDs to match. This issue has been addressed by a fix released in version 5.4.1. An immediate workaround would be to change collation of the affected field. See CVE-2024-32879.

Affected versions of the social-auth-app-django package are vulnerable to Authentication Bypass due to unintended email-based account association during the authentication pipeline. In social_django.storage.create_user (invoked by social_core.pipeline.user.create_user), an IntegrityError during user creation triggers a fallback that returns an existing User looked up by e-mail, effectively performing social_core.pipeline.social_auth.associate_by_email even when that step is disabled.

Rsa 4.7 includes a fix for CVE-2020-25658: It was found that python-rsa is vulnerable to Bleichenbacher timing attacks. An attacker can use this flaw via the RSA decryption API to decrypt parts of the cipher text encrypted with RSA.

Rsa 4.3 includes a fix for CVE-2020-13757: Python-RSA before 4.3 ignores leading '\0' bytes during decryption of ciphertext. This could conceivably have a security-relevant impact, e.g., by helping an attacker to infer that an application uses Python-RSA, or if the length of accepted ciphertext affects application behavior (such as by causing excessive memory allocation).

Affected versions of Idna are vulnerable to Denial Of Service via the idna.encode(), where a specially crafted argument could lead to significant resource consumption. In version 3.7, this function has been updated to reject such inputs efficiently, minimizing resource use. A practical workaround involves enforcing a maximum domain name length of 253 characters before encoding, as the vulnerability is triggered by unusually large inputs that normal operations wouldn't encounter.

Affected versions of the idna package are vulnerable to Denial of Service due to an incomplete fix for CVE-2024-3651 that still allows specially crafted inputs to consume significant resources during encoding. The idna.encode() function invokes the valid_contexto validator on every label before applying length-based rejection, so payloads such as long repetitions of the Arabic-Indic digit U+0660 or sequences of the Katakana middle dot U+30FB followed by a CJK character cause valid_contexto to perform extensive context-rule processing across each character. A remote attacker who can supply domain-name input to an application that calls idna.encode() without first enforcing the 253-character DNS length limit can submit arbitrarily large strings that drive the validator to exhaust CPU time, resulting in Denial of Service through resource consumption.

Kombu 5.2.1 updates Amazon sqs dependency 'urllib3' minimum version to 1.26.7 to include security fixes.
https://github.com/celery/kombu/commit/f3b04558fa0df4ecc383c93e0b3b300d95e17c47

Affected versions of this package are vulnerable to Insufficient Verification of Data Authenticity. The library does not validate the `crit` (Critical) Header Parameter as required by RFC 7515 §4.1.11 — when a JWT contains a `crit` array listing extensions that the library does not understand, the token is accepted instead of rejected. An attacker can exploit this vulnerability by crafting JWTs with unknown critical extensions (e.g., MFA requirements, token binding, scope restrictions) that are silently ignored, potentially bypassing security policies or causing split-brain verification in mixed-library deployments where other RFC-compliant libraries would reject the same token.

PyJWT 2.4.0 includes a fix for CVE-2022-29217: An attacker submitting the JWT token can choose the used signing algorithm. The PyJWT library requires that the application chooses what algorithms are supported. The application can specify 'jwt.algorithms.get_default_algorithms()' to get support for all algorithms, or specify a single algorithm. The issue is not that big as 'algorithms=jwt.algorithms.get_default_algorithms()' has to be used. As a workaround, always be explicit with the algorithms that are accepted and expected when decoding.

An issue was discovered in Django 4.2 before 4.2.21, 5.1 before 5.1.9, and 5.2 before 5.2.1. The django.utils.html.strip_tags() function is vulnerable to a potential denial-of-service (slow performance) when processing inputs containing large sequences of incomplete HTML tags. The template filter striptags is also vulnerable, because it is built on top of strip_tags().

A potential denial-of-service vulnerability has been identified in Django's urlize() and urlizetrunc() functions in django.utils.html. This vulnerability can be triggered by inputting huge strings containing a specific sequence of characters.

Affected versions of the Django package are vulnerable to Denial of Service (DoS) due to inefficient string concatenation when processing duplicate HTTP headers in ASGI mode. The ASGIRequest class combines repeated headers using repeated string concatenation, resulting in super-linear (quadratic) time complexity when processing requests with many duplicate headers.

Django 2.2.26, 3.2.11 and 4.0.1 include a fix for CVE-2021-45452: Storage.save in Django 2.2 before 2.2.26, 3.2 before 3.2.11, and 4.0 before 4.0.1 allows directory traversal if crafted filenames are directly passed to it.
https://www.djangoproject.com/weblog/2022/jan/04/security-releases/

An issue was discovered in Django 2.2 before 2.2.13 and 3.0 before 3.0.7. In cases where a memcached backend does not perform key validation, passing malformed cache keys could result in a key collision, and potential data leakage.

Affected versions of Django are vulnerable to Denial-of-Service via django.utils.text.Truncator. The django.utils.text.Truncator chars() and words() methods (when used with html=True) are subject to a potential DoS (denial of service) attack via certain inputs with very long, potentially malformed HTML text. The chars() and words() methods are used to implement the truncatechars_html and truncatewords_html template filters, which are thus also vulnerable. NOTE: this issue exists because of an incomplete fix for CVE-2019-14232.

Django 2.2.16, 3.0.10 and 3.1.1 include a fix for CVE-2020-24583: An issue was discovered in Django 2.2 before 2.2.16, 3.0 before 3.0.10, and 3.1 before 3.1.1 (when Python 3.7+ is used). FILE_UPLOAD_DIRECTORY_PERMISSIONS mode was not applied to intermediate-level directories created in the process of uploading files. It was also not applied to intermediate-level collected static directories when using the collectstatic management command.
#NOTE: This vulnerability affects only users of Python versions above 3.7.
https://www.djangoproject.com/weblog/2020/sep/01/security-releases

Affected versions of Django are vulnerable to potential regular expression denial-of-service (REDoS). django.utils.text.Truncator.words() method (with html=True) and truncatewords_html template filter were subject to a potential regular expression denial-of-service attack using a suitably crafted string (follow up to CVE-2019-14232 and CVE-2023-43665).

Affected versions of Django are affected by a potential denial-of-service vulnerability in the django.utils.html.urlize() function. The urlize and urlizetrunc template filters were susceptible to a denial-of-service attack via certain inputs containing many brackets. An attacker could exploit this vulnerability to cause significant delays or crashes in the affected application.

Django 4.2.7, 4.1.13 and 3.2.23 include a fix for CVE-2023-46695: Potential denial of service vulnerability in UsernameField on Windows.
https://www.djangoproject.com/weblog/2023/nov/01/security-releases

Affected versions of Django has a potential SQL injection vulnerability in the QuerySet.values() and QuerySet.values_list() methods. When used on models with a JSONField, these methods are susceptible to SQL injection through column aliases if a crafted JSON object key is passed as an argument.

Affected versions of Django are vulnerable to potential Denial of Service via certain inputs with a very large number of Unicode characters in django.utils.encoding.uri_to_iri().

Django 2.2.28, 3.2.13 and 4.0.4 include a fix for CVE-2022-28347: A SQL injection issue was discovered in QuerySet.explain() in Django 2.2 before 2.2.28, 3.2 before 3.2.13, and 4.0 before 4.0.4. This occurs by passing a crafted dictionary (with dictionary expansion) as the **options argument, and placing the injection payload in an option name.
https://www.djangoproject.com/weblog/2022/apr/11/security-releases

Django fixes a potential denial-of-service vulnerability in XML ``Deserializer``.

A security vulnerability has been discovered in certain versions of Django, affecting the password reset functionality. The PasswordResetForm class in django.contrib.auth.forms inadvertently allowed attackers to enumerate user email addresses by exploiting unhandled exceptions during the email sending process. This could be done by issuing password reset requests and observing the responses. Django has implemented a fix where these exceptions are now caught and logged using the django.contrib.auth logger, preventing potential information leakage through error responses.

Affected versions of the Django package are vulnerable to SQL Injection due to improper handling of column aliases containing periods in QuerySet.order_by() when combined with FilteredRelation. The QuerySet.order_by() method fails to properly sanitize column aliases that contain periods when the same alias is used in FilteredRelation via dictionary expansion. 
https://github.com/django/django/commit/90f5b10784ba5bf369caed87640e2b4394ea3314

Django 2.2.21, 3.1.9 and 3.2.1 include a fix for CVE-2021-31542: MultiPartParser, UploadedFile, and FieldFile allowed directory traversal via uploaded files with suitably crafted file names.
https://www.djangoproject.com/weblog/2021/may/04/security-releases

An issue was discovered in Django 2.2 before 2.2.13 and 3.0 before 3.0.7. Query parameters generated by the Django admin ForeignKeyRawIdWidget were not properly URL encoded, leading to a possibility of an XSS attack.

Affected versions of Django are vulnerable to potential denial-of-service in intcomma template filter when used with very long strings.

Django addresses a memory exhaustion issue in django.utils.numberformat.floatformat(). When floatformat receives a string representation of a number in scientific notation with a large exponent, it could lead to excessive memory consumption. To prevent this, decimals with more than 200 digits are now returned as-is.

In Django 3.2 before 3.2.16, 4.0 before 4.0.8, and 4.1 before 4.1.2, internationalized URLs were subject to a potential denial of service attack via the locale parameter, which is treated as a regular expression.

Affected versions of the `django` package are vulnerable to Download of Code Without Integrity Check due to improper handling of user-supplied input in the HTTP FileResponse class. The vulnerability arises because the Content-Disposition header of a FileResponse can be set using a filename derived from user input without sufficient validation. An attacker can exploit this by crafting a request that causes a file with malicious content to be downloaded, potentially executing arbitrary code on the client system when the file is opened.

Affected versions of the Django package are vulnerable to SQL Injection due to insufficient input sanitization in FilteredRelation column aliases. The FilteredRelation class fails to properly validate or escape column alias names when they are provided through dictionary expansion as keyword arguments to QuerySet.annotate() or QuerySet.alias() methods, allowing malicious SQL code to be injected directly into the generated database queries.

An issue was discovered in Django 2.2 before 2.2.16, 3.0 before 3.0.10, and 3.1 before 3.1.1 (when Python 3.7+ is used). The intermediate-level directories of the filesystem cache had the system's standard umask rather than 0o077.

Django versions 2.2.19, 3.0.13 and 3.1.7 include a fix for CVE-2021-23336: Web cache poisoning via 'django.utils.http.limited_parse_qsl()'. Django contains a copy of 'urllib.parse.parse_qsl' which was added to backport some security fixes. A further security fix has been issued recently such that 'parse_qsl(' no longer allows using ';' as a query parameter separator by default.

Django 2.2.27, 3.2.12 and 4.0.2 include a fix for CVE-2022-23833: Denial-of-service possibility in file uploads.
https://www.djangoproject.com/weblog/2022/feb/01/security-releases

In Django 2.2 before 2.2.20, 3.0 before 3.0.14, and 3.1 before 3.1.8, MultiPartParser allowed directory traversal via uploaded files with suitably crafted file names. Built-in upload handlers were not affected by this vulnerability.

CVE-2025-64458: Affected versions of the Django package are vulnerable to Denial of Service (DoS) due to slow Unicode NFKC normalization on Windows being applied to untrusted inputs. The django.contrib.auth.views.LoginView and django.contrib.auth.views.LogoutView, and django.views.i18n.set_language normalize user-controlled strings using Python’s NFKC algorithm, which is unusually slow on Windows for huge Unicode sequences and can be triggered to consume excessive CPU.

Django 2.2.26, 3.2.11 and 4.0.1 include a fix for CVE-2021-45115: UserAttributeSimilarityValidator incurred significant overhead in evaluating a submitted password that was artificially large in relation to the comparison values. In a situation where access to user registration was unrestricted, this provided a potential vector for a denial-of-service attack.
https://www.djangoproject.com/weblog/2022/jan/04/security-releases/

Django 4.1.7, 4.0.10 and 3.2.18 include a fix for CVE-2023-24580: Potential denial-of-service vulnerability in file uploads.
https://www.djangoproject.com/weblog/2023/feb/14/security-releases

Affected versions of Django are vulnerable to a potential denial-of-service (DoS) attack in the `django.utils.html.strip_tags()` method. The vulnerability occurs when the `strip_tags()` method or the `striptags` template filter processes inputs containing large sequences of nested, incomplete HTML entities.

Django affected versions are vulnerable to a potential SQL injection in the HasKey(lhs, rhs) lookup on Oracle databases. The vulnerability arises when untrusted data is directly used as the lhs value in the django.db.models.fields.json.HasKey lookup. However, applications using the jsonfield.has_key lookup with the __ syntax remain unaffected by this issue.

An issue was discovered in Django 5.2 before 5.2.3, 5.1 before 5.1.11, and 4.2 before 4.2.23. Internal HTTP response logging does not escape request.path, which allows remote attackers to potentially manipulate log output via crafted URLs. This may lead to log injection or forgery when logs are viewed in terminals or processed by external systems.

Django 2.2.18, 3.0.12 and 3.1.6 include a fix for CVE-2021-3281: The django.utils.archive.extract method (used by "startapp --template" and "startproject --template") allows directory traversal via an archive with absolute paths or relative paths with dot segments.

Affected versions of Django are vulnerable to a potential ReDoS (regular expression denial of service) in EmailValidator and URLValidator via a very large number of domain name labels of emails and URLs.

Django 2.2.26, 3.2.11 and 4.0.1 include a fix for CVE-2021-45116: An issue was discovered in Django 2.2 before 2.2.26, 3.2 before 3.2.11, and 4.0 before 4.0.1. Due to leveraging the Django Template Language's variable resolution logic, the dictsort template filter was potentially vulnerable to information disclosure, or an unintended method call, if passed a suitably crafted key.
https://www.djangoproject.com/weblog/2022/jan/04/security-releases

Django 2.2.24, 3.1.12, and 3.2.4 include a fix for CVE-2021-33571: In Django 2.2 before 2.2.24, 3.x before 3.1.12, and 3.2 before 3.2.4, URLValidator, validate_ipv4_address, and validate_ipv46_address do not prohibit leading zero characters in octal literals. This may allow a bypass of access control that is based on IP addresses. (validate_ipv4_address and validate_ipv46_address are unaffected with Python 3.9.5+).
https://www.djangoproject.com/weblog/2021/jun/02/security-releases

Django 3.2.14 and 4.0.6 include a fix for CVE-2022-34265: Potential SQL injection via Trunc(kind) and Extract(lookup_name) arguments.
https://www.djangoproject.com/weblog/2022/jul/04/security-releases

Affected versions of the Django package are vulnerable to Path Traversal due to improper validation of file paths in the django.contrib.admindocs module. The `TemplateDetailView` view allows staff members to verify the existence of arbitrary files by manipulating the file path. An attacker with staff privileges can exploit this vulnerability to check for the presence of files outside the template root directories, and if the `admindocs` templates are customized to display file contents, they can also access the contents of these files.

The {% debug %} template tag in Django 2.2 before 2.2.27, 3.2 before 3.2.12, and 4.0 before 4.0.2 does not properly encode the current context. This may lead to XSS.

Affected versions of Django are affected by a username enumeration vulnerability caused by timing differences in the django.contrib.auth.backends.ModelBackend.authenticate() method. This method allowed remote attackers to enumerate users through a timing attack involving login requests for users with unusable passwords. The timing difference in the authentication process exposed whether a username was valid or not, potentially aiding attackers in gaining unauthorized access.

Django has a potential denial-of-service vulnerability in django.utils.html.urlize() and AdminURLFieldWidget. The urlize and urlizetrunc functions, along with AdminURLFieldWidget, are vulnerable to denial-of-service attacks when handling inputs with a very large number of Unicode characters.

Django 4.2.1, 4.1.9 and 3.2.19 include a fix for CVE-2023-31047: In Django 3.2 before 3.2.19, 4.x before 4.1.9, and 4.2 before 4.2.1, it was possible to bypass validation when using one form field to upload multiple files. This multiple upload has never been supported by forms.FileField or forms.ImageField (only the last uploaded file was validated). However, Django's "Uploading multiple files" documentation suggested otherwise.
https://www.djangoproject.com/weblog/2023/may/03/security-releases

Django 2.2.28, 3.2.13 and 4.0.4 include a fix for CVE-2022-28346: An issue was discovered in Django 2.2 before 2.2.28, 3.2 before 3.2.13, and 4.0 before 4.0.4. QuerySet.annotate(), aggregate(), and extra() methods are subject to SQL injection in column aliases via a crafted dictionary (with dictionary expansion) as the passed **kwargs.
https://www.djangoproject.com/weblog/2022/apr/11/security-releases

Django 3.2.17, 4.0.9 and 4.1.6 includes a fix for CVE-2023-23969: In Django 3.2 before 3.2.17, 4.0 before 4.0.9, and 4.1 before 4.1.6, the parsed values of Accept-Language headers are cached in order to avoid repetitive parsing. This leads to a potential denial-of-service vector via excessive memory usage if the raw value of Accept-Language headers is very large.
https://www.djangoproject.com/weblog/2023/feb/01/security-releases

CVE-2025-64459: Affected versions of the Django package are vulnerable to SQL Injection due to improper input validation, allowing the internal _connector keyword argument to be accepted from untrusted dictionaries via expansion. The .filter(), .exclude(), and .get() methods on QuerySet, as well as the Q class, resolve **kwargs and will treat a supplied _connector value as the logical connector without constraining it to the expected set (AND/OR), permitting attacker-controlled tokens to influence SQL predicate construction.

Django fixes potential SQL injection in ``FilteredRelation`` column aliases on PostgreSQL.

Affected versions of the pillow package are vulnerable to Integer Overflow due to unchecked accumulation of glyph advance values while tracking the current rendering position during font processing. When a font supplies an excessively large advance for each glyph, the running position counter wraps around because the arithmetic is performed in a fixed-width integer type that cannot represent the resulting magnitude. A remote attacker who can supply a crafted font file to a target that uses Pillow's font rendering can trigger the overflow, leading to incorrect memory calculations and potential memory corruption.

Affected versions of the pillow package are vulnerable to Denial of Service due to an unbounded loop when traversing PDF cross-reference trailer chains without cycle detection. The PdfParser module follows Prev pointers in PDF trailers to read cross-reference sections, but it does not track previously processed offsets, so a trailer whose Prev pointer references its own offset or forms a longer cycle causes the parser to loop indefinitely. A remote attacker who supplies a crafted PDF document can cause the parsing process to hang, consuming 100% CPU and rendering the consuming application unresponsive.

Pillow 10.0.0 includes a fix for CVE-2023-44271: Denial of Service that uncontrollably allocates memory to process a given task, potentially causing a service to crash by having it run out of memory. This occurs for truetype in ImageFont when textlength in an ImageDraw instance operates on a long text argument.
https://github.com/python-pillow/Pillow/pull/7244

Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICO container, and thus an attempted memory allocation can be very large.

Pillow 10.3.0 introduces a security update addressing CVE-2024-28219 by replacing certain functions with strncpy to prevent buffer overflow issues.

Pillow 8.1.1 includes a fix for CVE-2021-25289: TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files because of certain interpretation conflicts with LibTIFF in RGBA mode. NOTE: this issue exists because of an incomplete fix for CVE-2020-35654.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow version 8.2.0 includes a fix for CVE-2021-28677: For EPS data, the readline implementation used in EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28677-fix-eps-dos-on-open

In libImaging/PcxDecode.c in Pillow before 7.1.0, an out-of-bounds read can occur when reading PCX files where state->shuffle is instructed to read beyond state->buffer.

Pillow 8.1.0 includes a fix for SGI Decode buffer overrun. CVE-2020-35655 #5173.

Pillow 8.1.0 fixes TIFF OOB Write error. CVE-2020-35654 #5175.

Pillow 8.3.0 includes a fix for CVE-2021-34552: Pillow through 8.2.0 and PIL (also known as Python Imaging Library) through 1.1.7 allow an attacker to pass controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.0.html#buffer-overflow
https://pillow.readthedocs.io/en/stable/releasenotes/index.html

Pillow 9.0.0 includes a fix for CVE-2022-22816: path_getbbox in path.c in Pillow before 9.0.0 has a buffer over-read during initialization of ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow version 8.2.0 includes a fix for CVE-2021-28676: For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28676-fix-fli-dos

Pillow 9.0.1 includes a fix for CVE-2022-22817: PIL.ImageMath.eval in Pillow before 9.0.0 allows evaluation of arbitrary expressions, such as ones that use the Python exec method. A first patch was issued for version 9.0.0 but it did not prevent builtins available to lambda expressions.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.1.html#security

Pillow 9.0.0 includes a fix for CVE-2022-22815: path_getbbox in path.c in Pillow before 9.0.0 improperly initializes ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow before 7.1.0 has multiple out-of-bounds reads in libImaging/FliDecode.c.

In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a number of out-of-bounds reads exist in the parsing of SGI image files, a different issue than CVE-2020-5311.

In Pillow before 7.1.0, there are two Buffer Overflows in libImaging/TiffDecode.c.

Pillow 8.2.0 includes a fix for CVE-2021-25288: There is an out-of-bounds read in J2kDecode, in j2ku_gray_i.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

Pillow 8.1.1 includes a fix for CVE-2021-25292: The PDF parser allows a regular expression DoS (ReDoS) attack via a crafted PDF file because of a catastrophic backtracking regex.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow before 9.0.1 allows attackers to delete files because spaces in temporary pathnames are mishandled.

Pillow 9.0.0 excludes carriage return in PDF regex to help prevent ReDoS.
https://github.com/python-pillow/Pillow/pull/5912
https://github.com/python-pillow/Pillow/commit/43b800d933c996226e4d7df00c33fcbe46d97363

Pillow 10.0.1 updates its C dependency 'libwebp' to 1.3.2 to include a fix for a high-risk vulnerability.
https://pillow.readthedocs.io/en/stable/releasenotes/10.0.1.html

Pillow 8.1.1 includes a fix for CVE-2021-25293: There is an out-of-bounds read in SGIRleDecode.c.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0, there are multiple out-of-bounds reads via a crafted JP2 file.

In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the user-supplied stride value is trusted for buffer calculations.

Pillow 8.1.1 includes a fix for CVE-2021-27921: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for a BLP container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the number of input layers relative to the size of the data block. This could lead to a DoS on Image.open prior to Image.load.

Pillow is affected by an arbitrary code execution vulnerability. If an attacker has control over the keys passed to the environment argument of PIL.ImageMath.eval(), they may be able to execute arbitrary code.
https://pillow.readthedocs.io/en/stable/releasenotes/10.2.0.html

Pillow from 5.2.0 and before 8.3.2 is vulnerable to Regular Expression Denial of Service (ReDoS) via the getrgb function.
https://github.com/python-pillow/Pillow/commit/9e08eb8f78fdfd2f476e1b20b7cf38683754866b
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.2.html

Pillow 8.1.1 includes a fix for CVE-2021-25291: In TiffDecode.c, there is an out-of-bounds read in TiffreadRGBATile via invalid tile boundaries.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-25290: In TiffDecode.c, there is a negative-offset memcpy with an invalid size.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.0.1 updates 'FreeType' used in binary wheels to v2.10.4 to include a security fix.

Pillow 9.0.0 ensures JpegImagePlugin stops at the end of a truncated file to avoid Denial of Service attacks.
https://github.com/python-pillow/Pillow/pull/5921
https://github.com/advisories/GHSA-4fx9-vc88-q2xc

Pillow is potentially vulnerable to DoS attacks through PIL.ImageFont.ImageFont.getmask(). A decompression bomb check has also been added to the affected function.

Pillow before 9.2.0 performs Improper Handling of Highly Compressed GIF Data (Data Amplification).

Pillow 8.2.0 includes a fix for CVE-2021-25287: There is an out-of-bounds read in J2kDecode, in j2ku_graya_la.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

Pillow version 8.2.0 includes a fix for CVE-2021-28678: For BLP data, BlpImagePlugin did not properly check that reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be run a large number of times on empty data.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28678-fix-blp-dos

Pillow 8.1.1 includes a fix for CVE-2021-27922: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICNS container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Affected versions of the pyasn1 package are vulnerable to Denial of Service (DoS) due to uncontrolled recursion when decoding deeply nested ASN.1 data. The vulnerability exists in the BER decoder’s indefLenValueDecoder, valueDecoder, and _decodeComponentsSchemaless code paths, where decodeFun is recursively invoked for nested SEQUENCE, SET, SEQUENCE OF, and SET OF elements without enforcing a recursion-depth limit.

Pyyaml version 5.4 includes a fix for CVE-2020-14343: A vulnerability was discovered in the PyYAML library in versions before 5.4, where it is susceptible to arbitrary code execution when it processes untrusted YAML files through the full_load method or with the FullLoader loader. Applications that use the library to process untrusted input may be vulnerable to this flaw. This flaw allows an attacker to execute arbitrary code on the system by abusing the python/object/new constructor. This flaw is due to an incomplete fix for CVE-2020-1747.
https://bugzilla.redhat.com/show_bug.cgi?id=1860466

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in inventory.
https://github.com/sphinx-doc/sphinx/issues/8175
https://github.com/sphinx-doc/sphinx/commit/f7b872e673f9b359a61fd287a7338a28077840d2

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in docstring.
https://github.com/sphinx-doc/sphinx/issues/8172
https://github.com/sphinx-doc/sphinx/commit/f00e75278c5999f40b214d8934357fbf0e705417

Affected versions of the sqlparse package are vulnerable to Denial of Service (DoS) due to missing hard limits on token grouping recursion depth and token processing when formatting very large SQL tuple lists. During sqlparse.format() processing, the sqlparse.engine.grouping._group_matching() and sqlparse.engine.grouping._group() functions can recurse and iterate over excessively large tlist.tokens without enforcing MAX_GROUPING_DEPTH or MAX_GROUPING_TOKENS, allowing grouping work to grow until it effectively hangs.

Affected versions of this package are vulnerable to Denial of Service (DoS) attacks due to Algorithmic Complexity. The SQL parser fails to enforce limits when processing deeply nested tuples and large token sequences, leading to excessive resource consumption through crafted SQL statements with extreme nesting depth or token counts.

**Note:** This issue is due to an incomplete fix for CVE-2024-4340.

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

Sqlparse 0.4.4 includes a fix for CVE-2023-30608: Parser contains a regular expression that is vulnerable to ReDOS (Regular Expression Denial of Service).
https://github.com/andialbrecht/sqlparse/security/advisories/GHSA-rrm6-wvj7-cwh2

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

Affected versions of the urllib3 package are vulnerable to Information Disclosure due to improper handling of sensitive headers during cross-origin redirects in the low-level proxy API. When following cross-origin redirects via ProxyManager.connection_from_url().urlopen() with assert_same_host=False, sensitive headers including Authorization, Cookie, and Proxy-Authorization are not stripped, unlike the high-level API, which removes them via Retry.DEFAULT_REMOVE_HEADERS_ON_REDIRECT. An attacker controlling a redirect target can capture these sensitive headers from requests that follow cross-origin redirects through the low-level proxy API path.

Urllib3 1.25.9 includes a fix for CVE-2020-26137: Urllib3 before 1.25.9 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of putrequest(). NOTE: this is similar to CVE-2020-26116.
https://github.com/python/cpython/issues/83784
https://github.com/urllib3/urllib3/pull/1800

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Affected versions of urllib3 are vulnerable to an HTTP redirect handling vulnerability that fails to remove the HTTP request body when a POST changes to a GET via 301, 302, or 303 responses. This flaw can expose sensitive request data if the origin service is compromised and redirects to a malicious endpoint, though exploitability is low when no sensitive data is used. The vulnerability affects automatic redirect behavior. It is fixed in versions 1.26.18 and 2.0.7; update or disable redirects using redirects=False.
This vulnerability is specific to Python's urllib3 library.

Urllib3 1.26.17 and 2.0.5 include a fix for CVE-2023-43804: Urllib3 doesn't treat the 'Cookie' HTTP header special or provide any helpers for managing cookies over HTTP, that is the responsibility of the user. However, it is possible for a user to specify a 'Cookie' header and unknowingly leak information via HTTP redirects to a different origin if that user doesn't disable redirects explicitly.
https://github.com/urllib3/urllib3/security/advisories/GHSA-v845-jxx5-vc9f

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to improper handling of highly compressed HTTP response bodies during streaming decompression. The urllib3.HTTPResponse methods stream(), read(), read1(), read_chunked(), and readinto() may fully decompress a minimal but highly compressed payload based on the Content-Encoding header into an internal buffer instead of limiting the decompressed output to the requested chunk size, causing excessive CPU usage and massive memory allocation on the client side.

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to redirect handling that drains connections by decompressing redirect response bodies without enforcing streaming read limits. The issue occurs when using urllib3’s streaming mode (for example, preload_content=False) while allowing redirects, because urllib3.response.HTTPResponse.drain_conn() would call HTTPResponse.read() in a way that decoded/decompressed the entire redirect response body even before any streaming reads were performed, effectively bypassing decompression-bomb safeguards.

Urllib3 1.26.5 includes a fix for CVE-2021-33503: When provided with a URL containing many @ characters in the authority component, the authority regular expression exhibits catastrophic backtracking, causing a denial of service if a URL were passed as a parameter or redirected to via an HTTP redirect.
https://github.com/advisories/GHSA-q2q7-5pp4-w6pg

Affected versions of the urllib3 package are vulnerable to Denial of Service (DoS) due to allowing an unbounded number of content-encoding decompression steps for HTTP responses. The HTTPResponse content decoding pipeline in urllib3 follows the Content-Encoding header and applies each advertised compression algorithm in sequence without enforcing a maximum chain length or effective output size, so a malicious peer can send a response with a very long encoding chain that triggers excessive CPU use and massive memory allocation during decompression.

Ipython versions 8.0.1, 7.31.1, 7.16.3 and 5.11 include a fix for CVE-2022-21699: Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine.
https://github.com/ipython/ipython/security/advisories/GHSA-pq7m-3gw7-gq5x

IPython 8.10.0 includes a fix for CVE-2023-24816: Versions prior to 8.10.0 are subject to a command injection vulnerability with very specific prerequisites. This vulnerability requires that the function 'IPython.utils.terminal.set_term_title' be called on Windows in a Python environment where ctypes is not available. The dependency on 'ctypes' in 'IPython.utils._process_win32' prevents the vulnerable code from ever being reached in the ipython binary. However, as a library that could be used by another tool 'set_term_title' could be called and hence introduce a vulnerability. If an attacker get untrusted input to an instance of this function they would be able to inject shell commands as current process and limited to the scope of the current process. As a workaround, users should ensure that any calls to the 'IPython.utils.terminal.set_term_title' function are done with trusted or filtered input.
https://github.com/ipython/ipython/security/advisories/GHSA-29gw-9793-fvw7

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of the Werkzeug package are vulnerable to Denial of Service (DoS) due to improper handling of Windows special device names in the safe_join function. In Werkzeug versions before 3.1.4, safe_join permits path segments such as “CON” or “AUX” to pass validation, allowing send_from_directory to construct a path that resolves to a Windows device file, which opens successfully but then blocks indefinitely when read.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of the Werkzeug package are vulnerable to Denial of Service (DoS) due to improper handling of Windows special device names in path joining logic. The safe_join() function fails to reject device-name path segments when they are preceded by other segments (for example, example/NUL), and send_from_directory() relies on safe_join() when resolving user-supplied file paths.

Affected versions of the Werkzeug package are vulnerable to Improper Handling of Windows Device Names due to incomplete validation of Windows reserved device names in user-controlled path segments. In werkzeug.security.safe_join, path components ending with special device names (for example CON or AUX) are not reliably rejected when they include compound extensions (for example CON.txt.html) or trailing spaces, and werkzeug.utils.send_from_directory relies on safe_join when resolving a requested filename.

Affected versions of the gunicorn package are vulnerable to HTTP Request/Response Smuggling due to improper validation of the Transfer-Encoding header that enables a TE.CL desynchronisation condition. Gunicorn’s HTTP parser does not consistently enforce RFC semantics when parsing conflicting or unsupported request framing—such as messages containing both Transfer-Encoding and Content-Length—so the backend may fall back to Content-Length while an intermediary treats the message as chunked.

Gunicorn fails to properly validate Transfer-Encoding headers, leading to HTTP Request Smuggling (HRS) vulnerabilities. By crafting requests with conflicting Transfer-Encoding headers, attackers can bypass security restrictions and access restricted endpoints. This issue is due to Gunicorn's handling of Transfer-Encoding headers, where it incorrectly processes requests with multiple, conflicting Transfer-Encoding headers, treating them as chunked regardless of the final encoding specified. This vulnerability allows for a range of attacks including cache poisoning, session manipulation, and data exposure.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Affected versions of the requests package are vulnerable to Insecure Temporary File reuse due to predictable temporary filename generation in extract_zipped_paths(). The requests.utils.extract_zipped_paths() utility extracts files from zip archives into the system temporary directory using a deterministic path, and if that file already exists, the function reuses it without validating that it is the expected extracted content.

Affected versions of Requests are vulnerable to proxy credential leakage. When redirected to an HTTPS endpoint, the Proxy-Authorization header is forwarded to the destination server due to the use of rebuild_proxies to reattach the header. This may allow a malicious actor to exfiltrate sensitive information.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Sentry-sdk 1.4.1 includes a fix for a Race Condition vulnerability.
https://github.com/getsentry/sentry-python/pull/1203

Sentry-sdk 1.14.0 includes a fix for CVE-2023-28117: When using the Django integration of versions prior to 1.14.0 of the Sentry SDK in a specific configuration it is possible to leak sensitive cookies values, including the session cookie to Sentry. These sensitive cookies could then be used by someone with access to your Sentry issues to impersonate or escalate their privileges within your application. In order for these sensitive values to be leaked, the Sentry SDK configuration must have 'sendDefaultPII' set to 'True'; one must use a custom name for either 'SESSION_COOKIE_NAME' or 'CSRF_COOKIE_NAME' in one's Django settings; and one must not be configured in one's organization or project settings to use Sentry's data scrubbing features to account for the custom cookie names. As of version 1.14.0, the Django integration of the 'sentry-sdk' will detect the custom cookie names based on one's Django settings and will remove the values from the payload before sending the data to Sentry. As a workaround, use the SDK's filtering mechanism to remove the cookies from the payload that is sent to Sentry. For error events, this can be done with the 'before_send' callback method and for performance related events (transactions) one can use the 'before_send_transaction' callback method. Those who want to handle filtering of these values on the server-side can also use Sentry's advanced data scrubbing feature to account for the custom cookie names. Look for the '$http.cookies', '$http.headers', '$request.cookies', or '$request.headers' fields to target with a scrubbing rule.
https://github.com/getsentry/sentry-python/security/advisories/GHSA-29pr-6jr8-q5jm

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

Django-filter 2.4.0 includes a fix for CVE-2020-15225: In django-filter before version 2.4.0, automatically generated 'NumberFilter' instances, whose value was later converted to an integer, were subject to potential DoS from maliciously input using exponential format with sufficiently large exponents. Version 2.4.0+ applies a 'MaxValueValidator' with a a default 'limit_value' of 1e50 to the form field used by 'NumberFilter' instances. In addition, 'NumberFilter' implements the new 'get_max_validator()' which should return a configured validator instance to customise the limit, or else 'None' to disable the additional validation. Users may manually apply an equivalent validator if they are not able to upgrade.
https://github.com/carltongibson/django-filter/security/advisories/GHSA-x7gm-rfgv-w973

A SQL Injection issue in the SQL Panel in Jazzband Django Debug Toolbar before 1.11.1, 2.x before 2.2.1, and 3.x before 3.2.1 allows attackers to execute SQL statements by changing the raw_sql input field of the SQL explain, analyze, or select form. See CVE-2021-30459.

A flaw was found in Django REST Framework versions before 3.12.0 and before 3.11.2. When using the browseable API viewer, Django REST Framework fails to properly escape certain strings that can come from user input. This allows a user who can control those strings to inject malicious <script> tags, leading to a cross-site-scripting (XSS) vulnerability.

Affected versions of the package djangorestframework are vulnerable to Cross-site Scripting (XSS) via the break_long_headers template filter due to improper input sanitization before splitting and joining with <br> tags.

Django-celery-results through 1.2.1 stores task results in the database. Among the data it stores are the variables passed into the tasks. The variables may contain sensitive cleartext information that does not belong unencrypted in the database. See CVE-2020-17495.

Python Social Auth is a social authentication/registration mechanism. Prior to version 5.4.1, due to default case-insensitive collation in MySQL or MariaDB databases, third-party authentication user IDs are not case-sensitive and could cause different IDs to match. This issue has been addressed by a fix released in version 5.4.1. An immediate workaround would be to change collation of the affected field. See CVE-2024-32879.

Affected versions of the social-auth-app-django package are vulnerable to Authentication Bypass due to unintended email-based account association during the authentication pipeline. In social_django.storage.create_user (invoked by social_core.pipeline.user.create_user), an IntegrityError during user creation triggers a fallback that returns an existing User looked up by e-mail, effectively performing social_core.pipeline.social_auth.associate_by_email even when that step is disabled.

Rsa 4.7 includes a fix for CVE-2020-25658: It was found that python-rsa is vulnerable to Bleichenbacher timing attacks. An attacker can use this flaw via the RSA decryption API to decrypt parts of the cipher text encrypted with RSA.

Rsa 4.3 includes a fix for CVE-2020-13757: Python-RSA before 4.3 ignores leading '\0' bytes during decryption of ciphertext. This could conceivably have a security-relevant impact, e.g., by helping an attacker to infer that an application uses Python-RSA, or if the length of accepted ciphertext affects application behavior (such as by causing excessive memory allocation).

Affected versions of Idna are vulnerable to Denial Of Service via the idna.encode(), where a specially crafted argument could lead to significant resource consumption. In version 3.7, this function has been updated to reject such inputs efficiently, minimizing resource use. A practical workaround involves enforcing a maximum domain name length of 253 characters before encoding, as the vulnerability is triggered by unusually large inputs that normal operations wouldn't encounter.

Affected versions of the idna package are vulnerable to Denial of Service due to an incomplete fix for CVE-2024-3651 that still allows specially crafted inputs to consume significant resources during encoding. The idna.encode() function invokes the valid_contexto validator on every label before applying length-based rejection, so payloads such as long repetitions of the Arabic-Indic digit U+0660 or sequences of the Katakana middle dot U+30FB followed by a CJK character cause valid_contexto to perform extensive context-rule processing across each character. A remote attacker who can supply domain-name input to an application that calls idna.encode() without first enforcing the 253-character DNS length limit can submit arbitrarily large strings that drive the validator to exhaust CPU time, resulting in Denial of Service through resource consumption.

Kombu 5.2.1 updates Amazon sqs dependency 'urllib3' minimum version to 1.26.7 to include security fixes.
https://github.com/celery/kombu/commit/f3b04558fa0df4ecc383c93e0b3b300d95e17c47

Affected versions of this package are vulnerable to Insufficient Verification of Data Authenticity. The library does not validate the `crit` (Critical) Header Parameter as required by RFC 7515 §4.1.11 — when a JWT contains a `crit` array listing extensions that the library does not understand, the token is accepted instead of rejected. An attacker can exploit this vulnerability by crafting JWTs with unknown critical extensions (e.g., MFA requirements, token binding, scope restrictions) that are silently ignored, potentially bypassing security policies or causing split-brain verification in mixed-library deployments where other RFC-compliant libraries would reject the same token.

PyJWT 2.4.0 includes a fix for CVE-2022-29217: An attacker submitting the JWT token can choose the used signing algorithm. The PyJWT library requires that the application chooses what algorithms are supported. The application can specify 'jwt.algorithms.get_default_algorithms()' to get support for all algorithms, or specify a single algorithm. The issue is not that big as 'algorithms=jwt.algorithms.get_default_algorithms()' has to be used. As a workaround, always be explicit with the algorithms that are accepted and expected when decoding.

Celery 5.2.0 updates 'kombu' to v5.2.1, which includes dependencies updates that resolve security issues.

Celery 5.2.2 includes a fix for CVE-2021-23727: Celery before 5.2.2. by default trusts the messages and metadata stored in backends (result stores). When reading task metadata from the backend, the data is deserialized. Given that an attacker can gain access to, or somehow manipulate the metadata within a celery backend, they could trigger a stored command injection vulnerability and potentially gain further access to the system.

An issue was discovered in Django 4.2 before 4.2.21, 5.1 before 5.1.9, and 5.2 before 5.2.1. The django.utils.html.strip_tags() function is vulnerable to a potential denial-of-service (slow performance) when processing inputs containing large sequences of incomplete HTML tags. The template filter striptags is also vulnerable, because it is built on top of strip_tags().

A potential denial-of-service vulnerability has been identified in Django's urlize() and urlizetrunc() functions in django.utils.html. This vulnerability can be triggered by inputting huge strings containing a specific sequence of characters.

Affected versions of the Django package are vulnerable to Denial of Service (DoS) due to inefficient string concatenation when processing duplicate HTTP headers in ASGI mode. The ASGIRequest class combines repeated headers using repeated string concatenation, resulting in super-linear (quadratic) time complexity when processing requests with many duplicate headers.

Django 2.2.26, 3.2.11 and 4.0.1 include a fix for CVE-2021-45452: Storage.save in Django 2.2 before 2.2.26, 3.2 before 3.2.11, and 4.0 before 4.0.1 allows directory traversal if crafted filenames are directly passed to it.
https://www.djangoproject.com/weblog/2022/jan/04/security-releases/

An issue was discovered in Django 2.2 before 2.2.13 and 3.0 before 3.0.7. In cases where a memcached backend does not perform key validation, passing malformed cache keys could result in a key collision, and potential data leakage.

Affected versions of Django are vulnerable to Denial-of-Service via django.utils.text.Truncator. The django.utils.text.Truncator chars() and words() methods (when used with html=True) are subject to a potential DoS (denial of service) attack via certain inputs with very long, potentially malformed HTML text. The chars() and words() methods are used to implement the truncatechars_html and truncatewords_html template filters, which are thus also vulnerable. NOTE: this issue exists because of an incomplete fix for CVE-2019-14232.

Django 2.2.16, 3.0.10 and 3.1.1 include a fix for CVE-2020-24583: An issue was discovered in Django 2.2 before 2.2.16, 3.0 before 3.0.10, and 3.1 before 3.1.1 (when Python 3.7+ is used). FILE_UPLOAD_DIRECTORY_PERMISSIONS mode was not applied to intermediate-level directories created in the process of uploading files. It was also not applied to intermediate-level collected static directories when using the collectstatic management command.
#NOTE: This vulnerability affects only users of Python versions above 3.7.
https://www.djangoproject.com/weblog/2020/sep/01/security-releases

Affected versions of Django are vulnerable to potential regular expression denial-of-service (REDoS). django.utils.text.Truncator.words() method (with html=True) and truncatewords_html template filter were subject to a potential regular expression denial-of-service attack using a suitably crafted string (follow up to CVE-2019-14232 and CVE-2023-43665).

Affected versions of Django are affected by a potential denial-of-service vulnerability in the django.utils.html.urlize() function. The urlize and urlizetrunc template filters were susceptible to a denial-of-service attack via certain inputs containing many brackets. An attacker could exploit this vulnerability to cause significant delays or crashes in the affected application.

Django 4.2.7, 4.1.13 and 3.2.23 include a fix for CVE-2023-46695: Potential denial of service vulnerability in UsernameField on Windows.
https://www.djangoproject.com/weblog/2023/nov/01/security-releases

Affected versions of Django has a potential SQL injection vulnerability in the QuerySet.values() and QuerySet.values_list() methods. When used on models with a JSONField, these methods are susceptible to SQL injection through column aliases if a crafted JSON object key is passed as an argument.

Affected versions of Django are vulnerable to potential Denial of Service via certain inputs with a very large number of Unicode characters in django.utils.encoding.uri_to_iri().

Django 2.2.28, 3.2.13 and 4.0.4 include a fix for CVE-2022-28347: A SQL injection issue was discovered in QuerySet.explain() in Django 2.2 before 2.2.28, 3.2 before 3.2.13, and 4.0 before 4.0.4. This occurs by passing a crafted dictionary (with dictionary expansion) as the **options argument, and placing the injection payload in an option name.
https://www.djangoproject.com/weblog/2022/apr/11/security-releases

Django fixes a potential denial-of-service vulnerability in XML ``Deserializer``.

A security vulnerability has been discovered in certain versions of Django, affecting the password reset functionality. The PasswordResetForm class in django.contrib.auth.forms inadvertently allowed attackers to enumerate user email addresses by exploiting unhandled exceptions during the email sending process. This could be done by issuing password reset requests and observing the responses. Django has implemented a fix where these exceptions are now caught and logged using the django.contrib.auth logger, preventing potential information leakage through error responses.

Affected versions of the Django package are vulnerable to SQL Injection due to improper handling of column aliases containing periods in QuerySet.order_by() when combined with FilteredRelation. The QuerySet.order_by() method fails to properly sanitize column aliases that contain periods when the same alias is used in FilteredRelation via dictionary expansion. 
https://github.com/django/django/commit/90f5b10784ba5bf369caed87640e2b4394ea3314

Django 2.2.21, 3.1.9 and 3.2.1 include a fix for CVE-2021-31542: MultiPartParser, UploadedFile, and FieldFile allowed directory traversal via uploaded files with suitably crafted file names.
https://www.djangoproject.com/weblog/2021/may/04/security-releases

An issue was discovered in Django 2.2 before 2.2.13 and 3.0 before 3.0.7. Query parameters generated by the Django admin ForeignKeyRawIdWidget were not properly URL encoded, leading to a possibility of an XSS attack.

Affected versions of Django are vulnerable to potential denial-of-service in intcomma template filter when used with very long strings.

Django addresses a memory exhaustion issue in django.utils.numberformat.floatformat(). When floatformat receives a string representation of a number in scientific notation with a large exponent, it could lead to excessive memory consumption. To prevent this, decimals with more than 200 digits are now returned as-is.

In Django 3.2 before 3.2.16, 4.0 before 4.0.8, and 4.1 before 4.1.2, internationalized URLs were subject to a potential denial of service attack via the locale parameter, which is treated as a regular expression.

Affected versions of the `django` package are vulnerable to Download of Code Without Integrity Check due to improper handling of user-supplied input in the HTTP FileResponse class. The vulnerability arises because the Content-Disposition header of a FileResponse can be set using a filename derived from user input without sufficient validation. An attacker can exploit this by crafting a request that causes a file with malicious content to be downloaded, potentially executing arbitrary code on the client system when the file is opened.

Affected versions of the Django package are vulnerable to SQL Injection due to insufficient input sanitization in FilteredRelation column aliases. The FilteredRelation class fails to properly validate or escape column alias names when they are provided through dictionary expansion as keyword arguments to QuerySet.annotate() or QuerySet.alias() methods, allowing malicious SQL code to be injected directly into the generated database queries.

An issue was discovered in Django 2.2 before 2.2.16, 3.0 before 3.0.10, and 3.1 before 3.1.1 (when Python 3.7+ is used). The intermediate-level directories of the filesystem cache had the system's standard umask rather than 0o077.

Django versions 2.2.19, 3.0.13 and 3.1.7 include a fix for CVE-2021-23336: Web cache poisoning via 'django.utils.http.limited_parse_qsl()'. Django contains a copy of 'urllib.parse.parse_qsl' which was added to backport some security fixes. A further security fix has been issued recently such that 'parse_qsl(' no longer allows using ';' as a query parameter separator by default.

Django 2.2.27, 3.2.12 and 4.0.2 include a fix for CVE-2022-23833: Denial-of-service possibility in file uploads.
https://www.djangoproject.com/weblog/2022/feb/01/security-releases

In Django 2.2 before 2.2.20, 3.0 before 3.0.14, and 3.1 before 3.1.8, MultiPartParser allowed directory traversal via uploaded files with suitably crafted file names. Built-in upload handlers were not affected by this vulnerability.

CVE-2025-64458: Affected versions of the Django package are vulnerable to Denial of Service (DoS) due to slow Unicode NFKC normalization on Windows being applied to untrusted inputs. The django.contrib.auth.views.LoginView and django.contrib.auth.views.LogoutView, and django.views.i18n.set_language normalize user-controlled strings using Python’s NFKC algorithm, which is unusually slow on Windows for huge Unicode sequences and can be triggered to consume excessive CPU.

Django 2.2.26, 3.2.11 and 4.0.1 include a fix for CVE-2021-45115: UserAttributeSimilarityValidator incurred significant overhead in evaluating a submitted password that was artificially large in relation to the comparison values. In a situation where access to user registration was unrestricted, this provided a potential vector for a denial-of-service attack.
https://www.djangoproject.com/weblog/2022/jan/04/security-releases/

Django 4.1.7, 4.0.10 and 3.2.18 include a fix for CVE-2023-24580: Potential denial-of-service vulnerability in file uploads.
https://www.djangoproject.com/weblog/2023/feb/14/security-releases

Affected versions of Django are vulnerable to a potential denial-of-service (DoS) attack in the `django.utils.html.strip_tags()` method. The vulnerability occurs when the `strip_tags()` method or the `striptags` template filter processes inputs containing large sequences of nested, incomplete HTML entities.

Django affected versions are vulnerable to a potential SQL injection in the HasKey(lhs, rhs) lookup on Oracle databases. The vulnerability arises when untrusted data is directly used as the lhs value in the django.db.models.fields.json.HasKey lookup. However, applications using the jsonfield.has_key lookup with the __ syntax remain unaffected by this issue.

An issue was discovered in Django 5.2 before 5.2.3, 5.1 before 5.1.11, and 4.2 before 4.2.23. Internal HTTP response logging does not escape request.path, which allows remote attackers to potentially manipulate log output via crafted URLs. This may lead to log injection or forgery when logs are viewed in terminals or processed by external systems.

Django 2.2.18, 3.0.12 and 3.1.6 include a fix for CVE-2021-3281: The django.utils.archive.extract method (used by "startapp --template" and "startproject --template") allows directory traversal via an archive with absolute paths or relative paths with dot segments.

Affected versions of Django are vulnerable to a potential ReDoS (regular expression denial of service) in EmailValidator and URLValidator via a very large number of domain name labels of emails and URLs.

Django 2.2.26, 3.2.11 and 4.0.1 include a fix for CVE-2021-45116: An issue was discovered in Django 2.2 before 2.2.26, 3.2 before 3.2.11, and 4.0 before 4.0.1. Due to leveraging the Django Template Language's variable resolution logic, the dictsort template filter was potentially vulnerable to information disclosure, or an unintended method call, if passed a suitably crafted key.
https://www.djangoproject.com/weblog/2022/jan/04/security-releases

Django 2.2.24, 3.1.12, and 3.2.4 include a fix for CVE-2021-33571: In Django 2.2 before 2.2.24, 3.x before 3.1.12, and 3.2 before 3.2.4, URLValidator, validate_ipv4_address, and validate_ipv46_address do not prohibit leading zero characters in octal literals. This may allow a bypass of access control that is based on IP addresses. (validate_ipv4_address and validate_ipv46_address are unaffected with Python 3.9.5+).
https://www.djangoproject.com/weblog/2021/jun/02/security-releases

Django 3.2.14 and 4.0.6 include a fix for CVE-2022-34265: Potential SQL injection via Trunc(kind) and Extract(lookup_name) arguments.
https://www.djangoproject.com/weblog/2022/jul/04/security-releases

Affected versions of the Django package are vulnerable to Path Traversal due to improper validation of file paths in the django.contrib.admindocs module. The `TemplateDetailView` view allows staff members to verify the existence of arbitrary files by manipulating the file path. An attacker with staff privileges can exploit this vulnerability to check for the presence of files outside the template root directories, and if the `admindocs` templates are customized to display file contents, they can also access the contents of these files.

The {% debug %} template tag in Django 2.2 before 2.2.27, 3.2 before 3.2.12, and 4.0 before 4.0.2 does not properly encode the current context. This may lead to XSS.

Affected versions of Django are affected by a username enumeration vulnerability caused by timing differences in the django.contrib.auth.backends.ModelBackend.authenticate() method. This method allowed remote attackers to enumerate users through a timing attack involving login requests for users with unusable passwords. The timing difference in the authentication process exposed whether a username was valid or not, potentially aiding attackers in gaining unauthorized access.

Django has a potential denial-of-service vulnerability in django.utils.html.urlize() and AdminURLFieldWidget. The urlize and urlizetrunc functions, along with AdminURLFieldWidget, are vulnerable to denial-of-service attacks when handling inputs with a very large number of Unicode characters.

Django 4.2.1, 4.1.9 and 3.2.19 include a fix for CVE-2023-31047: In Django 3.2 before 3.2.19, 4.x before 4.1.9, and 4.2 before 4.2.1, it was possible to bypass validation when using one form field to upload multiple files. This multiple upload has never been supported by forms.FileField or forms.ImageField (only the last uploaded file was validated). However, Django's "Uploading multiple files" documentation suggested otherwise.
https://www.djangoproject.com/weblog/2023/may/03/security-releases

Django 2.2.28, 3.2.13 and 4.0.4 include a fix for CVE-2022-28346: An issue was discovered in Django 2.2 before 2.2.28, 3.2 before 3.2.13, and 4.0 before 4.0.4. QuerySet.annotate(), aggregate(), and extra() methods are subject to SQL injection in column aliases via a crafted dictionary (with dictionary expansion) as the passed **kwargs.
https://www.djangoproject.com/weblog/2022/apr/11/security-releases

Django 3.2.17, 4.0.9 and 4.1.6 includes a fix for CVE-2023-23969: In Django 3.2 before 3.2.17, 4.0 before 4.0.9, and 4.1 before 4.1.6, the parsed values of Accept-Language headers are cached in order to avoid repetitive parsing. This leads to a potential denial-of-service vector via excessive memory usage if the raw value of Accept-Language headers is very large.
https://www.djangoproject.com/weblog/2023/feb/01/security-releases

CVE-2025-64459: Affected versions of the Django package are vulnerable to SQL Injection due to improper input validation, allowing the internal _connector keyword argument to be accepted from untrusted dictionaries via expansion. The .filter(), .exclude(), and .get() methods on QuerySet, as well as the Q class, resolve **kwargs and will treat a supplied _connector value as the logical connector without constraining it to the expected set (AND/OR), permitting attacker-controlled tokens to influence SQL predicate construction.

Django fixes potential SQL injection in ``FilteredRelation`` column aliases on PostgreSQL.

Affected versions of the pillow package are vulnerable to Integer Overflow due to unchecked accumulation of glyph advance values while tracking the current rendering position during font processing. When a font supplies an excessively large advance for each glyph, the running position counter wraps around because the arithmetic is performed in a fixed-width integer type that cannot represent the resulting magnitude. A remote attacker who can supply a crafted font file to a target that uses Pillow's font rendering can trigger the overflow, leading to incorrect memory calculations and potential memory corruption.

Affected versions of the pillow package are vulnerable to Denial of Service due to an unbounded loop when traversing PDF cross-reference trailer chains without cycle detection. The PdfParser module follows Prev pointers in PDF trailers to read cross-reference sections, but it does not track previously processed offsets, so a trailer whose Prev pointer references its own offset or forms a longer cycle causes the parser to loop indefinitely. A remote attacker who supplies a crafted PDF document can cause the parsing process to hang, consuming 100% CPU and rendering the consuming application unresponsive.

Pillow 10.0.0 includes a fix for CVE-2023-44271: Denial of Service that uncontrollably allocates memory to process a given task, potentially causing a service to crash by having it run out of memory. This occurs for truetype in ImageFont when textlength in an ImageDraw instance operates on a long text argument.
https://github.com/python-pillow/Pillow/pull/7244

Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICO container, and thus an attempted memory allocation can be very large.

Pillow 10.3.0 introduces a security update addressing CVE-2024-28219 by replacing certain functions with strncpy to prevent buffer overflow issues.

Pillow 8.1.1 includes a fix for CVE-2021-25289: TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files because of certain interpretation conflicts with LibTIFF in RGBA mode. NOTE: this issue exists because of an incomplete fix for CVE-2020-35654.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow version 8.2.0 includes a fix for CVE-2021-28677: For EPS data, the readline implementation used in EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28677-fix-eps-dos-on-open

In libImaging/PcxDecode.c in Pillow before 7.1.0, an out-of-bounds read can occur when reading PCX files where state->shuffle is instructed to read beyond state->buffer.

Pillow 8.1.0 includes a fix for SGI Decode buffer overrun. CVE-2020-35655 #5173.