Rsa 4.7 includes a fix for CVE-2020-25658: It was found that python-rsa is vulnerable to Bleichenbacher timing attacks. An attacker can use this flaw via the RSA decryption API to decrypt parts of the cipher text encrypted with RSA.

Rsa 4.3 includes a fix for CVE-2020-13757: Python-RSA before 4.3 ignores leading '\0' bytes during decryption of ciphertext. This could conceivably have a security-relevant impact, e.g., by helping an attacker to infer that an application uses Python-RSA, or if the length of accepted ciphertext affects application behavior (such as by causing excessive memory allocation).

Kombu 5.2.1 updates Amazon sqs dependency 'urllib3' minimum version to 1.26.7 to include security fixes.
https://github.com/celery/kombu/commit/f3b04558fa0df4ecc383c93e0b3b300d95e17c47

PyJWT 2.4.0 includes a fix for CVE-2022-29217: An attacker submitting the JWT token can choose the used signing algorithm. The PyJWT library requires that the application chooses what algorithms are supported. The application can specify 'jwt.algorithms.get_default_algorithms()' to get support for all algorithms, or specify a single algorithm. The issue is not that big as 'algorithms=jwt.algorithms.get_default_algorithms()' has to be used. As a workaround, always be explicit with the algorithms that are accepted and expected when decoding.

Pillow 9.0.0 ensures JpegImagePlugin stops at the end of a truncated file to avoid Denial of Service attacks.
https://github.com/python-pillow/Pillow/pull/5921
https://github.com/advisories/GHSA-4fx9-vc88-q2xc

An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the number of input layers relative to the size of the data block. This could lead to a DoS on Image.open prior to Image.load.

Pillow 8.1.1 includes a fix for CVE-2021-27921: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for a BLP container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the user-supplied stride value is trusted for buffer calculations.

In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0, there are multiple out-of-bounds reads via a crafted JP2 file.

Pillow 8.1.1 includes a fix for CVE-2021-25290: In TiffDecode.c, there is a negative-offset memcpy with an invalid size.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-25293: There is an out-of-bounds read in SGIRleDecode.c.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 10.0.1 updates its C dependency 'libwebp' to 1.3.2 to include a fix for a high-risk vulnerability.
https://pillow.readthedocs.io/en/stable/releasenotes/10.0.1.html

Pillow 9.0.0 excludes carriage return in PDF regex to help prevent ReDoS.
https://github.com/python-pillow/Pillow/pull/5912
https://github.com/python-pillow/Pillow/commit/43b800d933c996226e4d7df00c33fcbe46d97363

Pillow before 9.0.1 allows attackers to delete files because spaces in temporary pathnames are mishandled.

Pillow 8.1.1 includes a fix for CVE-2021-25292: The PDF parser allows a regular expression DoS (ReDoS) attack via a crafted PDF file because of a catastrophic backtracking regex.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.2.0 includes a fix for CVE-2021-25288: There is an out-of-bounds read in J2kDecode, in j2ku_gray_i.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

In Pillow before 7.1.0, there are two Buffer Overflows in libImaging/TiffDecode.c.

Pillow 8.1.1 includes a fix for CVE-2021-25291: In TiffDecode.c, there is an out-of-bounds read in TiffreadRGBATile via invalid tile boundaries.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-27922: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICNS container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow version 8.2.0 includes a fix for CVE-2021-28678: For BLP data, BlpImagePlugin did not properly check that reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be run a large number of times on empty data.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28678-fix-blp-dos

In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a number of out-of-bounds reads exist in the parsing of SGI image files, a different issue than CVE-2020-5311.

Pillow before 7.1.0 has multiple out-of-bounds reads in libImaging/FliDecode.c.

Pillow 9.0.0 includes a fix for CVE-2022-22815: path_getbbox in path.c in Pillow before 9.0.0 improperly initializes ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow 9.0.1 includes a fix for CVE-2022-22817: PIL.ImageMath.eval in Pillow before 9.0.0 allows evaluation of arbitrary expressions, such as ones that use the Python exec method. A first patch was issued for version 9.0.0 but it did not prevent builtins available to lambda expressions.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.1.html#security

Pillow version 8.2.0 includes a fix for CVE-2021-28676: For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28676-fix-fli-dos

Pillow 8.2.0 includes a fix for CVE-2021-25287: There is an out-of-bounds read in J2kDecode, in j2ku_graya_la.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

Pillow 9.0.0 includes a fix for CVE-2022-22816: path_getbbox in path.c in Pillow before 9.0.0 has a buffer over-read during initialization of ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow 8.3.0 includes a fix for CVE-2021-34552: Pillow through 8.2.0 and PIL (also known as Python Imaging Library) through 1.1.7 allow an attacker to pass controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.0.html#buffer-overflow
https://pillow.readthedocs.io/en/stable/releasenotes/index.html

Pillow 10.3.0 introduces a security update addressing CVE-2024-28219 by replacing certain functions with strncpy to prevent buffer overflow issues.

Pillow from 5.2.0 and before 8.3.2 is vulnerable to Regular Expression Denial of Service (ReDoS) via the getrgb function.
https://github.com/python-pillow/Pillow/commit/9e08eb8f78fdfd2f476e1b20b7cf38683754866b
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.2.html

Pillow is affected by an arbitrary code execution vulnerability. If an attacker has control over the keys passed to the environment argument of PIL.ImageMath.eval(), they may be able to execute arbitrary code.
https://pillow.readthedocs.io/en/stable/releasenotes/10.2.0.html

Pillow 10.0.0 includes a fix for CVE-2023-44271: Denial of Service that uncontrollably allocates memory to process a given task, potentially causing a service to crash by having it run out of memory. This occurs for truetype in ImageFont when textlength in an ImageDraw instance operates on a long text argument.
https://github.com/python-pillow/Pillow/pull/7244

Pillow before 9.2.0 performs Improper Handling of Highly Compressed GIF Data (Data Amplification).

Pillow 8.1.0 fixes TIFF OOB Write error. CVE-2020-35654 #5175.

Pillow 8.1.0 includes a fix for SGI Decode buffer overrun. CVE-2020-35655 #5173.

Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICO container, and thus an attempted memory allocation can be very large.

Pillow is potentially vulnerable to DoS attacks through PIL.ImageFont.ImageFont.getmask(). A decompression bomb check has also been added to the affected function.

Pillow 8.0.1 updates 'FreeType' used in binary wheels to v2.10.4 to include a security fix.

In libImaging/PcxDecode.c in Pillow before 7.1.0, an out-of-bounds read can occur when reading PCX files where state->shuffle is instructed to read beyond state->buffer.

Pillow version 8.2.0 includes a fix for CVE-2021-28677: For EPS data, the readline implementation used in EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28677-fix-eps-dos-on-open

Pillow 8.1.1 includes a fix for CVE-2021-25289: TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files because of certain interpretation conflicts with LibTIFF in RGBA mode. NOTE: this issue exists because of an incomplete fix for CVE-2020-35654.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pyyaml version 5.4 includes a fix for CVE-2020-14343: A vulnerability was discovered in the PyYAML library in versions before 5.4, where it is susceptible to arbitrary code execution when it processes untrusted YAML files through the full_load method or with the FullLoader loader. Applications that use the library to process untrusted input may be vulnerable to this flaw. This flaw allows an attacker to execute arbitrary code on the system by abusing the python/object/new constructor. This flaw is due to an incomplete fix for CVE-2020-1747.
https://bugzilla.redhat.com/show_bug.cgi?id=1860466

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in inventory.
https://github.com/sphinx-doc/sphinx/issues/8175
https://github.com/sphinx-doc/sphinx/commit/f7b872e673f9b359a61fd287a7338a28077840d2

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in docstring.
https://github.com/sphinx-doc/sphinx/issues/8172
https://github.com/sphinx-doc/sphinx/commit/f00e75278c5999f40b214d8934357fbf0e705417

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sqlparse 0.4.4 includes a fix for CVE-2023-30608: Parser contains a regular expression that is vulnerable to ReDOS (Regular Expression Denial of Service).
https://github.com/andialbrecht/sqlparse/security/advisories/GHSA-rrm6-wvj7-cwh2

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Urllib3 1.26.17 and 2.0.5 include a fix for CVE-2023-43804: Urllib3 doesn't treat the 'Cookie' HTTP header special or provide any helpers for managing cookies over HTTP, that is the responsibility of the user. However, it is possible for a user to specify a 'Cookie' header and unknowingly leak information via HTTP redirects to a different origin if that user doesn't disable redirects explicitly.
https://github.com/urllib3/urllib3/security/advisories/GHSA-v845-jxx5-vc9f

Urllib3 1.26.5 includes a fix for CVE-2021-33503: When provided with a URL containing many @ characters in the authority component, the authority regular expression exhibits catastrophic backtracking, causing a denial of service if a URL were passed as a parameter or redirected to via an HTTP redirect.
https://github.com/advisories/GHSA-q2q7-5pp4-w6pg

Urllib3 1.25.9 includes a fix for CVE-2020-26137: Urllib3 before 1.25.9 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of putrequest(). NOTE: this is similar to CVE-2020-26116.
https://github.com/python/cpython/issues/83784
https://github.com/urllib3/urllib3/pull/1800

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

Affected versions of urllib3 are vulnerable to an HTTP redirect handling vulnerability that fails to remove the HTTP request body when a POST changes to a GET via 301, 302, or 303 responses. This flaw can expose sensitive request data if the origin service is compromised and redirects to a malicious endpoint, though exploitability is low when no sensitive data is used. The vulnerability affects automatic redirect behavior. It is fixed in versions 1.26.18 and 2.0.7; update or disable redirects using redirects=False.
This vulnerability is specific to Python's urllib3 library.

Ipython versions 8.0.1, 7.31.1, 7.16.3 and 5.11 include a fix for CVE-2022-21699: Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine.
https://github.com/ipython/ipython/security/advisories/GHSA-pq7m-3gw7-gq5x

IPython 8.10.0 includes a fix for CVE-2023-24816: Versions prior to 8.10.0 are subject to a command injection vulnerability with very specific prerequisites. This vulnerability requires that the function 'IPython.utils.terminal.set_term_title' be called on Windows in a Python environment where ctypes is not available. The dependency on 'ctypes' in 'IPython.utils._process_win32' prevents the vulnerable code from ever being reached in the ipython binary. However, as a library that could be used by another tool 'set_term_title' could be called and hence introduce a vulnerability. If an attacker get untrusted input to an instance of this function they would be able to inject shell commands as current process and limited to the scope of the current process. As a workaround, users should ensure that any calls to the 'IPython.utils.terminal.set_term_title' function are done with trusted or filtered input.
https://github.com/ipython/ipython/security/advisories/GHSA-29gw-9793-fvw7

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of Requests are vulnerable to proxy credential leakage. When redirected to an HTTPS endpoint, the Proxy-Authorization header is forwarded to the destination server due to the use of rebuild_proxies to reattach the header. This may allow a malicious actor to exfiltrate sensitive information.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Sentry-sdk 1.14.0 includes a fix for CVE-2023-28117: When using the Django integration of versions prior to 1.14.0 of the Sentry SDK in a specific configuration it is possible to leak sensitive cookies values, including the session cookie to Sentry. These sensitive cookies could then be used by someone with access to your Sentry issues to impersonate or escalate their privileges within your application. In order for these sensitive values to be leaked, the Sentry SDK configuration must have 'sendDefaultPII' set to 'True'; one must use a custom name for either 'SESSION_COOKIE_NAME' or 'CSRF_COOKIE_NAME' in one's Django settings; and one must not be configured in one's organization or project settings to use Sentry's data scrubbing features to account for the custom cookie names. As of version 1.14.0, the Django integration of the 'sentry-sdk' will detect the custom cookie names based on one's Django settings and will remove the values from the payload before sending the data to Sentry. As a workaround, use the SDK's filtering mechanism to remove the cookies from the payload that is sent to Sentry. For error events, this can be done with the 'before_send' callback method and for performance related events (transactions) one can use the 'before_send_transaction' callback method. Those who want to handle filtering of these values on the server-side can also use Sentry's advanced data scrubbing feature to account for the custom cookie names. Look for the '$http.cookies', '$http.headers', '$request.cookies', or '$request.headers' fields to target with a scrubbing rule.
https://github.com/getsentry/sentry-python/security/advisories/GHSA-29pr-6jr8-q5jm

Sentry-sdk 1.4.1 includes a fix for a Race Condition vulnerability.
https://github.com/getsentry/sentry-python/pull/1203

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

A SQL Injection issue in the SQL Panel in Jazzband Django Debug Toolbar before 1.11.1, 2.x before 2.2.1, and 3.x before 3.2.1 allows attackers to execute SQL statements by changing the raw_sql input field of the SQL explain, analyze, or select form. See CVE-2021-30459.

Affected versions of the social-auth-app-django package are vulnerable to Authentication Bypass due to unintended email-based account association during the authentication pipeline. In social_django.storage.create_user (invoked by social_core.pipeline.user.create_user), an IntegrityError during user creation triggers a fallback that returns an existing User looked up by e-mail, effectively performing social_core.pipeline.social_auth.associate_by_email even when that step is disabled.

Python Social Auth is a social authentication/registration mechanism. Prior to version 5.4.1, due to default case-insensitive collation in MySQL or MariaDB databases, third-party authentication user IDs are not case-sensitive and could cause different IDs to match. This issue has been addressed by a fix released in version 5.4.1. An immediate workaround would be to change collation of the affected field. See CVE-2024-32879.

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Rsa 4.7 includes a fix for CVE-2020-25658: It was found that python-rsa is vulnerable to Bleichenbacher timing attacks. An attacker can use this flaw via the RSA decryption API to decrypt parts of the cipher text encrypted with RSA.

Rsa 4.3 includes a fix for CVE-2020-13757: Python-RSA before 4.3 ignores leading '\0' bytes during decryption of ciphertext. This could conceivably have a security-relevant impact, e.g., by helping an attacker to infer that an application uses Python-RSA, or if the length of accepted ciphertext affects application behavior (such as by causing excessive memory allocation).

Kombu 5.2.1 updates Amazon sqs dependency 'urllib3' minimum version to 1.26.7 to include security fixes.
https://github.com/celery/kombu/commit/f3b04558fa0df4ecc383c93e0b3b300d95e17c47

PyJWT 2.4.0 includes a fix for CVE-2022-29217: An attacker submitting the JWT token can choose the used signing algorithm. The PyJWT library requires that the application chooses what algorithms are supported. The application can specify 'jwt.algorithms.get_default_algorithms()' to get support for all algorithms, or specify a single algorithm. The issue is not that big as 'algorithms=jwt.algorithms.get_default_algorithms()' has to be used. As a workaround, always be explicit with the algorithms that are accepted and expected when decoding.

Pillow 9.0.0 ensures JpegImagePlugin stops at the end of a truncated file to avoid Denial of Service attacks.
https://github.com/python-pillow/Pillow/pull/5921
https://github.com/advisories/GHSA-4fx9-vc88-q2xc

An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the number of input layers relative to the size of the data block. This could lead to a DoS on Image.open prior to Image.load.

Pillow 8.1.1 includes a fix for CVE-2021-27921: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for a BLP container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the user-supplied stride value is trusted for buffer calculations.

In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0, there are multiple out-of-bounds reads via a crafted JP2 file.

Pillow 8.1.1 includes a fix for CVE-2021-25290: In TiffDecode.c, there is a negative-offset memcpy with an invalid size.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-25293: There is an out-of-bounds read in SGIRleDecode.c.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 10.0.1 updates its C dependency 'libwebp' to 1.3.2 to include a fix for a high-risk vulnerability.
https://pillow.readthedocs.io/en/stable/releasenotes/10.0.1.html

Pillow 9.0.0 excludes carriage return in PDF regex to help prevent ReDoS.
https://github.com/python-pillow/Pillow/pull/5912
https://github.com/python-pillow/Pillow/commit/43b800d933c996226e4d7df00c33fcbe46d97363

Pillow before 9.0.1 allows attackers to delete files because spaces in temporary pathnames are mishandled.

Pillow 8.1.1 includes a fix for CVE-2021-25292: The PDF parser allows a regular expression DoS (ReDoS) attack via a crafted PDF file because of a catastrophic backtracking regex.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.2.0 includes a fix for CVE-2021-25288: There is an out-of-bounds read in J2kDecode, in j2ku_gray_i.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

In Pillow before 7.1.0, there are two Buffer Overflows in libImaging/TiffDecode.c.

Pillow 8.1.1 includes a fix for CVE-2021-25291: In TiffDecode.c, there is an out-of-bounds read in TiffreadRGBATile via invalid tile boundaries.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-27922: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICNS container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow version 8.2.0 includes a fix for CVE-2021-28678: For BLP data, BlpImagePlugin did not properly check that reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be run a large number of times on empty data.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28678-fix-blp-dos

In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a number of out-of-bounds reads exist in the parsing of SGI image files, a different issue than CVE-2020-5311.

Pillow before 7.1.0 has multiple out-of-bounds reads in libImaging/FliDecode.c.

Pillow 9.0.0 includes a fix for CVE-2022-22815: path_getbbox in path.c in Pillow before 9.0.0 improperly initializes ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow 9.0.1 includes a fix for CVE-2022-22817: PIL.ImageMath.eval in Pillow before 9.0.0 allows evaluation of arbitrary expressions, such as ones that use the Python exec method. A first patch was issued for version 9.0.0 but it did not prevent builtins available to lambda expressions.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.1.html#security

Pillow version 8.2.0 includes a fix for CVE-2021-28676: For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28676-fix-fli-dos

Pillow 8.2.0 includes a fix for CVE-2021-25287: There is an out-of-bounds read in J2kDecode, in j2ku_graya_la.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

Pillow 9.0.0 includes a fix for CVE-2022-22816: path_getbbox in path.c in Pillow before 9.0.0 has a buffer over-read during initialization of ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow 8.3.0 includes a fix for CVE-2021-34552: Pillow through 8.2.0 and PIL (also known as Python Imaging Library) through 1.1.7 allow an attacker to pass controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.0.html#buffer-overflow
https://pillow.readthedocs.io/en/stable/releasenotes/index.html

Pillow 10.3.0 introduces a security update addressing CVE-2024-28219 by replacing certain functions with strncpy to prevent buffer overflow issues.

Pillow from 5.2.0 and before 8.3.2 is vulnerable to Regular Expression Denial of Service (ReDoS) via the getrgb function.
https://github.com/python-pillow/Pillow/commit/9e08eb8f78fdfd2f476e1b20b7cf38683754866b
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.2.html

Pillow is affected by an arbitrary code execution vulnerability. If an attacker has control over the keys passed to the environment argument of PIL.ImageMath.eval(), they may be able to execute arbitrary code.
https://pillow.readthedocs.io/en/stable/releasenotes/10.2.0.html

Pillow 10.0.0 includes a fix for CVE-2023-44271: Denial of Service that uncontrollably allocates memory to process a given task, potentially causing a service to crash by having it run out of memory. This occurs for truetype in ImageFont when textlength in an ImageDraw instance operates on a long text argument.
https://github.com/python-pillow/Pillow/pull/7244

Pillow before 9.2.0 performs Improper Handling of Highly Compressed GIF Data (Data Amplification).

Pillow 8.1.0 fixes TIFF OOB Write error. CVE-2020-35654 #5175.

Pillow 8.1.0 includes a fix for SGI Decode buffer overrun. CVE-2020-35655 #5173.

Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICO container, and thus an attempted memory allocation can be very large.

Pillow is potentially vulnerable to DoS attacks through PIL.ImageFont.ImageFont.getmask(). A decompression bomb check has also been added to the affected function.

Pillow 8.0.1 updates 'FreeType' used in binary wheels to v2.10.4 to include a security fix.

In libImaging/PcxDecode.c in Pillow before 7.1.0, an out-of-bounds read can occur when reading PCX files where state->shuffle is instructed to read beyond state->buffer.

Pillow version 8.2.0 includes a fix for CVE-2021-28677: For EPS data, the readline implementation used in EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28677-fix-eps-dos-on-open

Pillow 8.1.1 includes a fix for CVE-2021-25289: TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files because of certain interpretation conflicts with LibTIFF in RGBA mode. NOTE: this issue exists because of an incomplete fix for CVE-2020-35654.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pyyaml version 5.4 includes a fix for CVE-2020-14343: A vulnerability was discovered in the PyYAML library in versions before 5.4, where it is susceptible to arbitrary code execution when it processes untrusted YAML files through the full_load method or with the FullLoader loader. Applications that use the library to process untrusted input may be vulnerable to this flaw. This flaw allows an attacker to execute arbitrary code on the system by abusing the python/object/new constructor. This flaw is due to an incomplete fix for CVE-2020-1747.
https://bugzilla.redhat.com/show_bug.cgi?id=1860466

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in inventory.
https://github.com/sphinx-doc/sphinx/issues/8175
https://github.com/sphinx-doc/sphinx/commit/f7b872e673f9b359a61fd287a7338a28077840d2

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in docstring.
https://github.com/sphinx-doc/sphinx/issues/8172
https://github.com/sphinx-doc/sphinx/commit/f00e75278c5999f40b214d8934357fbf0e705417

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sqlparse 0.4.4 includes a fix for CVE-2023-30608: Parser contains a regular expression that is vulnerable to ReDOS (Regular Expression Denial of Service).
https://github.com/andialbrecht/sqlparse/security/advisories/GHSA-rrm6-wvj7-cwh2

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Urllib3 1.26.17 and 2.0.5 include a fix for CVE-2023-43804: Urllib3 doesn't treat the 'Cookie' HTTP header special or provide any helpers for managing cookies over HTTP, that is the responsibility of the user. However, it is possible for a user to specify a 'Cookie' header and unknowingly leak information via HTTP redirects to a different origin if that user doesn't disable redirects explicitly.
https://github.com/urllib3/urllib3/security/advisories/GHSA-v845-jxx5-vc9f

Urllib3 1.26.5 includes a fix for CVE-2021-33503: When provided with a URL containing many @ characters in the authority component, the authority regular expression exhibits catastrophic backtracking, causing a denial of service if a URL were passed as a parameter or redirected to via an HTTP redirect.
https://github.com/advisories/GHSA-q2q7-5pp4-w6pg

Urllib3 1.25.9 includes a fix for CVE-2020-26137: Urllib3 before 1.25.9 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of putrequest(). NOTE: this is similar to CVE-2020-26116.
https://github.com/python/cpython/issues/83784
https://github.com/urllib3/urllib3/pull/1800

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

Affected versions of urllib3 are vulnerable to an HTTP redirect handling vulnerability that fails to remove the HTTP request body when a POST changes to a GET via 301, 302, or 303 responses. This flaw can expose sensitive request data if the origin service is compromised and redirects to a malicious endpoint, though exploitability is low when no sensitive data is used. The vulnerability affects automatic redirect behavior. It is fixed in versions 1.26.18 and 2.0.7; update or disable redirects using redirects=False.
This vulnerability is specific to Python's urllib3 library.

Ipython versions 8.0.1, 7.31.1, 7.16.3 and 5.11 include a fix for CVE-2022-21699: Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine.
https://github.com/ipython/ipython/security/advisories/GHSA-pq7m-3gw7-gq5x

IPython 8.10.0 includes a fix for CVE-2023-24816: Versions prior to 8.10.0 are subject to a command injection vulnerability with very specific prerequisites. This vulnerability requires that the function 'IPython.utils.terminal.set_term_title' be called on Windows in a Python environment where ctypes is not available. The dependency on 'ctypes' in 'IPython.utils._process_win32' prevents the vulnerable code from ever being reached in the ipython binary. However, as a library that could be used by another tool 'set_term_title' could be called and hence introduce a vulnerability. If an attacker get untrusted input to an instance of this function they would be able to inject shell commands as current process and limited to the scope of the current process. As a workaround, users should ensure that any calls to the 'IPython.utils.terminal.set_term_title' function are done with trusted or filtered input.
https://github.com/ipython/ipython/security/advisories/GHSA-29gw-9793-fvw7

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of Requests are vulnerable to proxy credential leakage. When redirected to an HTTPS endpoint, the Proxy-Authorization header is forwarded to the destination server due to the use of rebuild_proxies to reattach the header. This may allow a malicious actor to exfiltrate sensitive information.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Sentry-sdk 1.14.0 includes a fix for CVE-2023-28117: When using the Django integration of versions prior to 1.14.0 of the Sentry SDK in a specific configuration it is possible to leak sensitive cookies values, including the session cookie to Sentry. These sensitive cookies could then be used by someone with access to your Sentry issues to impersonate or escalate their privileges within your application. In order for these sensitive values to be leaked, the Sentry SDK configuration must have 'sendDefaultPII' set to 'True'; one must use a custom name for either 'SESSION_COOKIE_NAME' or 'CSRF_COOKIE_NAME' in one's Django settings; and one must not be configured in one's organization or project settings to use Sentry's data scrubbing features to account for the custom cookie names. As of version 1.14.0, the Django integration of the 'sentry-sdk' will detect the custom cookie names based on one's Django settings and will remove the values from the payload before sending the data to Sentry. As a workaround, use the SDK's filtering mechanism to remove the cookies from the payload that is sent to Sentry. For error events, this can be done with the 'before_send' callback method and for performance related events (transactions) one can use the 'before_send_transaction' callback method. Those who want to handle filtering of these values on the server-side can also use Sentry's advanced data scrubbing feature to account for the custom cookie names. Look for the '$http.cookies', '$http.headers', '$request.cookies', or '$request.headers' fields to target with a scrubbing rule.
https://github.com/getsentry/sentry-python/security/advisories/GHSA-29pr-6jr8-q5jm

Sentry-sdk 1.4.1 includes a fix for a Race Condition vulnerability.
https://github.com/getsentry/sentry-python/pull/1203

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

A SQL Injection issue in the SQL Panel in Jazzband Django Debug Toolbar before 1.11.1, 2.x before 2.2.1, and 3.x before 3.2.1 allows attackers to execute SQL statements by changing the raw_sql input field of the SQL explain, analyze, or select form. See CVE-2021-30459.

Affected versions of the social-auth-app-django package are vulnerable to Authentication Bypass due to unintended email-based account association during the authentication pipeline. In social_django.storage.create_user (invoked by social_core.pipeline.user.create_user), an IntegrityError during user creation triggers a fallback that returns an existing User looked up by e-mail, effectively performing social_core.pipeline.social_auth.associate_by_email even when that step is disabled.

Python Social Auth is a social authentication/registration mechanism. Prior to version 5.4.1, due to default case-insensitive collation in MySQL or MariaDB databases, third-party authentication user IDs are not case-sensitive and could cause different IDs to match. This issue has been addressed by a fix released in version 5.4.1. An immediate workaround would be to change collation of the affected field. See CVE-2024-32879.

Rsa 4.7 includes a fix for CVE-2020-25658: It was found that python-rsa is vulnerable to Bleichenbacher timing attacks. An attacker can use this flaw via the RSA decryption API to decrypt parts of the cipher text encrypted with RSA.

Rsa 4.3 includes a fix for CVE-2020-13757: Python-RSA before 4.3 ignores leading '\0' bytes during decryption of ciphertext. This could conceivably have a security-relevant impact, e.g., by helping an attacker to infer that an application uses Python-RSA, or if the length of accepted ciphertext affects application behavior (such as by causing excessive memory allocation).

Affected versions of Idna are vulnerable to Denial Of Service via the idna.encode(), where a specially crafted argument could lead to significant resource consumption. In version 3.7, this function has been updated to reject such inputs efficiently, minimizing resource use. A practical workaround involves enforcing a maximum domain name length of 253 characters before encoding, as the vulnerability is triggered by unusually large inputs that normal operations wouldn't encounter.

Kombu 5.2.1 updates Amazon sqs dependency 'urllib3' minimum version to 1.26.7 to include security fixes.
https://github.com/celery/kombu/commit/f3b04558fa0df4ecc383c93e0b3b300d95e17c47

PyJWT 2.4.0 includes a fix for CVE-2022-29217: An attacker submitting the JWT token can choose the used signing algorithm. The PyJWT library requires that the application chooses what algorithms are supported. The application can specify 'jwt.algorithms.get_default_algorithms()' to get support for all algorithms, or specify a single algorithm. The issue is not that big as 'algorithms=jwt.algorithms.get_default_algorithms()' has to be used. As a workaround, always be explicit with the algorithms that are accepted and expected when decoding.

Pillow 9.0.0 ensures JpegImagePlugin stops at the end of a truncated file to avoid Denial of Service attacks.
https://github.com/python-pillow/Pillow/pull/5921
https://github.com/advisories/GHSA-4fx9-vc88-q2xc

An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the number of input layers relative to the size of the data block. This could lead to a DoS on Image.open prior to Image.load.

Pillow 8.1.1 includes a fix for CVE-2021-27921: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for a BLP container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the user-supplied stride value is trusted for buffer calculations.

In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0, there are multiple out-of-bounds reads via a crafted JP2 file.

Pillow 8.1.1 includes a fix for CVE-2021-25290: In TiffDecode.c, there is a negative-offset memcpy with an invalid size.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-25293: There is an out-of-bounds read in SGIRleDecode.c.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 10.0.1 updates its C dependency 'libwebp' to 1.3.2 to include a fix for a high-risk vulnerability.
https://pillow.readthedocs.io/en/stable/releasenotes/10.0.1.html

Pillow 9.0.0 excludes carriage return in PDF regex to help prevent ReDoS.
https://github.com/python-pillow/Pillow/pull/5912
https://github.com/python-pillow/Pillow/commit/43b800d933c996226e4d7df00c33fcbe46d97363

Pillow before 9.0.1 allows attackers to delete files because spaces in temporary pathnames are mishandled.

Pillow 8.1.1 includes a fix for CVE-2021-25292: The PDF parser allows a regular expression DoS (ReDoS) attack via a crafted PDF file because of a catastrophic backtracking regex.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.2.0 includes a fix for CVE-2021-25288: There is an out-of-bounds read in J2kDecode, in j2ku_gray_i.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

In Pillow before 7.1.0, there are two Buffer Overflows in libImaging/TiffDecode.c.

Pillow 8.1.1 includes a fix for CVE-2021-25291: In TiffDecode.c, there is an out-of-bounds read in TiffreadRGBATile via invalid tile boundaries.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-27922: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICNS container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow version 8.2.0 includes a fix for CVE-2021-28678: For BLP data, BlpImagePlugin did not properly check that reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be run a large number of times on empty data.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28678-fix-blp-dos

In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a number of out-of-bounds reads exist in the parsing of SGI image files, a different issue than CVE-2020-5311.

Pillow before 7.1.0 has multiple out-of-bounds reads in libImaging/FliDecode.c.

Pillow 9.0.0 includes a fix for CVE-2022-22815: path_getbbox in path.c in Pillow before 9.0.0 improperly initializes ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow 9.0.1 includes a fix for CVE-2022-22817: PIL.ImageMath.eval in Pillow before 9.0.0 allows evaluation of arbitrary expressions, such as ones that use the Python exec method. A first patch was issued for version 9.0.0 but it did not prevent builtins available to lambda expressions.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.1.html#security

Pillow version 8.2.0 includes a fix for CVE-2021-28676: For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28676-fix-fli-dos

Pillow 8.2.0 includes a fix for CVE-2021-25287: There is an out-of-bounds read in J2kDecode, in j2ku_graya_la.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

Pillow 9.0.0 includes a fix for CVE-2022-22816: path_getbbox in path.c in Pillow before 9.0.0 has a buffer over-read during initialization of ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow 8.3.0 includes a fix for CVE-2021-34552: Pillow through 8.2.0 and PIL (also known as Python Imaging Library) through 1.1.7 allow an attacker to pass controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.0.html#buffer-overflow
https://pillow.readthedocs.io/en/stable/releasenotes/index.html

Pillow 10.3.0 introduces a security update addressing CVE-2024-28219 by replacing certain functions with strncpy to prevent buffer overflow issues.

Pillow from 5.2.0 and before 8.3.2 is vulnerable to Regular Expression Denial of Service (ReDoS) via the getrgb function.
https://github.com/python-pillow/Pillow/commit/9e08eb8f78fdfd2f476e1b20b7cf38683754866b
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.2.html

Pillow is affected by an arbitrary code execution vulnerability. If an attacker has control over the keys passed to the environment argument of PIL.ImageMath.eval(), they may be able to execute arbitrary code.
https://pillow.readthedocs.io/en/stable/releasenotes/10.2.0.html

Pillow 10.0.0 includes a fix for CVE-2023-44271: Denial of Service that uncontrollably allocates memory to process a given task, potentially causing a service to crash by having it run out of memory. This occurs for truetype in ImageFont when textlength in an ImageDraw instance operates on a long text argument.
https://github.com/python-pillow/Pillow/pull/7244

Pillow before 9.2.0 performs Improper Handling of Highly Compressed GIF Data (Data Amplification).

Pillow 8.1.0 fixes TIFF OOB Write error. CVE-2020-35654 #5175.

Pillow 8.1.0 includes a fix for SGI Decode buffer overrun. CVE-2020-35655 #5173.

Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICO container, and thus an attempted memory allocation can be very large.

Pillow is potentially vulnerable to DoS attacks through PIL.ImageFont.ImageFont.getmask(). A decompression bomb check has also been added to the affected function.

Pillow 8.0.1 updates 'FreeType' used in binary wheels to v2.10.4 to include a security fix.

In libImaging/PcxDecode.c in Pillow before 7.1.0, an out-of-bounds read can occur when reading PCX files where state->shuffle is instructed to read beyond state->buffer.

Pillow version 8.2.0 includes a fix for CVE-2021-28677: For EPS data, the readline implementation used in EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28677-fix-eps-dos-on-open

Pillow 8.1.1 includes a fix for CVE-2021-25289: TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files because of certain interpretation conflicts with LibTIFF in RGBA mode. NOTE: this issue exists because of an incomplete fix for CVE-2020-35654.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pyyaml version 5.4 includes a fix for CVE-2020-14343: A vulnerability was discovered in the PyYAML library in versions before 5.4, where it is susceptible to arbitrary code execution when it processes untrusted YAML files through the full_load method or with the FullLoader loader. Applications that use the library to process untrusted input may be vulnerable to this flaw. This flaw allows an attacker to execute arbitrary code on the system by abusing the python/object/new constructor. This flaw is due to an incomplete fix for CVE-2020-1747.
https://bugzilla.redhat.com/show_bug.cgi?id=1860466

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in inventory.
https://github.com/sphinx-doc/sphinx/issues/8175
https://github.com/sphinx-doc/sphinx/commit/f7b872e673f9b359a61fd287a7338a28077840d2

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in docstring.
https://github.com/sphinx-doc/sphinx/issues/8172
https://github.com/sphinx-doc/sphinx/commit/f00e75278c5999f40b214d8934357fbf0e705417

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sqlparse 0.4.4 includes a fix for CVE-2023-30608: Parser contains a regular expression that is vulnerable to ReDOS (Regular Expression Denial of Service).
https://github.com/andialbrecht/sqlparse/security/advisories/GHSA-rrm6-wvj7-cwh2

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Urllib3 1.26.17 and 2.0.5 include a fix for CVE-2023-43804: Urllib3 doesn't treat the 'Cookie' HTTP header special or provide any helpers for managing cookies over HTTP, that is the responsibility of the user. However, it is possible for a user to specify a 'Cookie' header and unknowingly leak information via HTTP redirects to a different origin if that user doesn't disable redirects explicitly.
https://github.com/urllib3/urllib3/security/advisories/GHSA-v845-jxx5-vc9f

Urllib3 1.26.5 includes a fix for CVE-2021-33503: When provided with a URL containing many @ characters in the authority component, the authority regular expression exhibits catastrophic backtracking, causing a denial of service if a URL were passed as a parameter or redirected to via an HTTP redirect.
https://github.com/advisories/GHSA-q2q7-5pp4-w6pg

Urllib3 1.25.9 includes a fix for CVE-2020-26137: Urllib3 before 1.25.9 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of putrequest(). NOTE: this is similar to CVE-2020-26116.
https://github.com/python/cpython/issues/83784
https://github.com/urllib3/urllib3/pull/1800

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

Affected versions of urllib3 are vulnerable to an HTTP redirect handling vulnerability that fails to remove the HTTP request body when a POST changes to a GET via 301, 302, or 303 responses. This flaw can expose sensitive request data if the origin service is compromised and redirects to a malicious endpoint, though exploitability is low when no sensitive data is used. The vulnerability affects automatic redirect behavior. It is fixed in versions 1.26.18 and 2.0.7; update or disable redirects using redirects=False.
This vulnerability is specific to Python's urllib3 library.

Ipython versions 8.0.1, 7.31.1, 7.16.3 and 5.11 include a fix for CVE-2022-21699: Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine.
https://github.com/ipython/ipython/security/advisories/GHSA-pq7m-3gw7-gq5x

IPython 8.10.0 includes a fix for CVE-2023-24816: Versions prior to 8.10.0 are subject to a command injection vulnerability with very specific prerequisites. This vulnerability requires that the function 'IPython.utils.terminal.set_term_title' be called on Windows in a Python environment where ctypes is not available. The dependency on 'ctypes' in 'IPython.utils._process_win32' prevents the vulnerable code from ever being reached in the ipython binary. However, as a library that could be used by another tool 'set_term_title' could be called and hence introduce a vulnerability. If an attacker get untrusted input to an instance of this function they would be able to inject shell commands as current process and limited to the scope of the current process. As a workaround, users should ensure that any calls to the 'IPython.utils.terminal.set_term_title' function are done with trusted or filtered input.
https://github.com/ipython/ipython/security/advisories/GHSA-29gw-9793-fvw7

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of Requests are vulnerable to proxy credential leakage. When redirected to an HTTPS endpoint, the Proxy-Authorization header is forwarded to the destination server due to the use of rebuild_proxies to reattach the header. This may allow a malicious actor to exfiltrate sensitive information.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Sentry-sdk 1.14.0 includes a fix for CVE-2023-28117: When using the Django integration of versions prior to 1.14.0 of the Sentry SDK in a specific configuration it is possible to leak sensitive cookies values, including the session cookie to Sentry. These sensitive cookies could then be used by someone with access to your Sentry issues to impersonate or escalate their privileges within your application. In order for these sensitive values to be leaked, the Sentry SDK configuration must have 'sendDefaultPII' set to 'True'; one must use a custom name for either 'SESSION_COOKIE_NAME' or 'CSRF_COOKIE_NAME' in one's Django settings; and one must not be configured in one's organization or project settings to use Sentry's data scrubbing features to account for the custom cookie names. As of version 1.14.0, the Django integration of the 'sentry-sdk' will detect the custom cookie names based on one's Django settings and will remove the values from the payload before sending the data to Sentry. As a workaround, use the SDK's filtering mechanism to remove the cookies from the payload that is sent to Sentry. For error events, this can be done with the 'before_send' callback method and for performance related events (transactions) one can use the 'before_send_transaction' callback method. Those who want to handle filtering of these values on the server-side can also use Sentry's advanced data scrubbing feature to account for the custom cookie names. Look for the '$http.cookies', '$http.headers', '$request.cookies', or '$request.headers' fields to target with a scrubbing rule.
https://github.com/getsentry/sentry-python/security/advisories/GHSA-29pr-6jr8-q5jm

Sentry-sdk 1.4.1 includes a fix for a Race Condition vulnerability.
https://github.com/getsentry/sentry-python/pull/1203

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

A SQL Injection issue in the SQL Panel in Jazzband Django Debug Toolbar before 1.11.1, 2.x before 2.2.1, and 3.x before 3.2.1 allows attackers to execute SQL statements by changing the raw_sql input field of the SQL explain, analyze, or select form. See CVE-2021-30459.

Affected versions of the social-auth-app-django package are vulnerable to Authentication Bypass due to unintended email-based account association during the authentication pipeline. In social_django.storage.create_user (invoked by social_core.pipeline.user.create_user), an IntegrityError during user creation triggers a fallback that returns an existing User looked up by e-mail, effectively performing social_core.pipeline.social_auth.associate_by_email even when that step is disabled.

Python Social Auth is a social authentication/registration mechanism. Prior to version 5.4.1, due to default case-insensitive collation in MySQL or MariaDB databases, third-party authentication user IDs are not case-sensitive and could cause different IDs to match. This issue has been addressed by a fix released in version 5.4.1. An immediate workaround would be to change collation of the affected field. See CVE-2024-32879.

Rsa 4.7 includes a fix for CVE-2020-25658: It was found that python-rsa is vulnerable to Bleichenbacher timing attacks. An attacker can use this flaw via the RSA decryption API to decrypt parts of the cipher text encrypted with RSA.

Rsa 4.3 includes a fix for CVE-2020-13757: Python-RSA before 4.3 ignores leading '\0' bytes during decryption of ciphertext. This could conceivably have a security-relevant impact, e.g., by helping an attacker to infer that an application uses Python-RSA, or if the length of accepted ciphertext affects application behavior (such as by causing excessive memory allocation).

Affected versions of Idna are vulnerable to Denial Of Service via the idna.encode(), where a specially crafted argument could lead to significant resource consumption. In version 3.7, this function has been updated to reject such inputs efficiently, minimizing resource use. A practical workaround involves enforcing a maximum domain name length of 253 characters before encoding, as the vulnerability is triggered by unusually large inputs that normal operations wouldn't encounter.

Kombu 5.2.1 updates Amazon sqs dependency 'urllib3' minimum version to 1.26.7 to include security fixes.
https://github.com/celery/kombu/commit/f3b04558fa0df4ecc383c93e0b3b300d95e17c47

PyJWT 2.4.0 includes a fix for CVE-2022-29217: An attacker submitting the JWT token can choose the used signing algorithm. The PyJWT library requires that the application chooses what algorithms are supported. The application can specify 'jwt.algorithms.get_default_algorithms()' to get support for all algorithms, or specify a single algorithm. The issue is not that big as 'algorithms=jwt.algorithms.get_default_algorithms()' has to be used. As a workaround, always be explicit with the algorithms that are accepted and expected when decoding.

Pillow 9.0.0 ensures JpegImagePlugin stops at the end of a truncated file to avoid Denial of Service attacks.
https://github.com/python-pillow/Pillow/pull/5921
https://github.com/advisories/GHSA-4fx9-vc88-q2xc

An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the number of input layers relative to the size of the data block. This could lead to a DoS on Image.open prior to Image.load.

Pillow 8.1.1 includes a fix for CVE-2021-27921: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for a BLP container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the user-supplied stride value is trusted for buffer calculations.

In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0, there are multiple out-of-bounds reads via a crafted JP2 file.

Pillow 8.1.1 includes a fix for CVE-2021-25290: In TiffDecode.c, there is a negative-offset memcpy with an invalid size.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-25293: There is an out-of-bounds read in SGIRleDecode.c.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 10.0.1 updates its C dependency 'libwebp' to 1.3.2 to include a fix for a high-risk vulnerability.
https://pillow.readthedocs.io/en/stable/releasenotes/10.0.1.html

Pillow 9.0.0 excludes carriage return in PDF regex to help prevent ReDoS.
https://github.com/python-pillow/Pillow/pull/5912
https://github.com/python-pillow/Pillow/commit/43b800d933c996226e4d7df00c33fcbe46d97363

Pillow before 9.0.1 allows attackers to delete files because spaces in temporary pathnames are mishandled.

Pillow 8.1.1 includes a fix for CVE-2021-25292: The PDF parser allows a regular expression DoS (ReDoS) attack via a crafted PDF file because of a catastrophic backtracking regex.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.2.0 includes a fix for CVE-2021-25288: There is an out-of-bounds read in J2kDecode, in j2ku_gray_i.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

In Pillow before 7.1.0, there are two Buffer Overflows in libImaging/TiffDecode.c.

Pillow 8.1.1 includes a fix for CVE-2021-25291: In TiffDecode.c, there is an out-of-bounds read in TiffreadRGBATile via invalid tile boundaries.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-27922: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICNS container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow version 8.2.0 includes a fix for CVE-2021-28678: For BLP data, BlpImagePlugin did not properly check that reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be run a large number of times on empty data.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28678-fix-blp-dos

In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a number of out-of-bounds reads exist in the parsing of SGI image files, a different issue than CVE-2020-5311.

Pillow before 7.1.0 has multiple out-of-bounds reads in libImaging/FliDecode.c.

Pillow 9.0.0 includes a fix for CVE-2022-22815: path_getbbox in path.c in Pillow before 9.0.0 improperly initializes ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow 9.0.1 includes a fix for CVE-2022-22817: PIL.ImageMath.eval in Pillow before 9.0.0 allows evaluation of arbitrary expressions, such as ones that use the Python exec method. A first patch was issued for version 9.0.0 but it did not prevent builtins available to lambda expressions.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.1.html#security

Pillow version 8.2.0 includes a fix for CVE-2021-28676: For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28676-fix-fli-dos

Pillow 8.2.0 includes a fix for CVE-2021-25287: There is an out-of-bounds read in J2kDecode, in j2ku_graya_la.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

Pillow 9.0.0 includes a fix for CVE-2022-22816: path_getbbox in path.c in Pillow before 9.0.0 has a buffer over-read during initialization of ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow 8.3.0 includes a fix for CVE-2021-34552: Pillow through 8.2.0 and PIL (also known as Python Imaging Library) through 1.1.7 allow an attacker to pass controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.0.html#buffer-overflow
https://pillow.readthedocs.io/en/stable/releasenotes/index.html

Pillow 10.3.0 introduces a security update addressing CVE-2024-28219 by replacing certain functions with strncpy to prevent buffer overflow issues.

Pillow from 5.2.0 and before 8.3.2 is vulnerable to Regular Expression Denial of Service (ReDoS) via the getrgb function.
https://github.com/python-pillow/Pillow/commit/9e08eb8f78fdfd2f476e1b20b7cf38683754866b
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.2.html

Pillow is affected by an arbitrary code execution vulnerability. If an attacker has control over the keys passed to the environment argument of PIL.ImageMath.eval(), they may be able to execute arbitrary code.
https://pillow.readthedocs.io/en/stable/releasenotes/10.2.0.html

Pillow 10.0.0 includes a fix for CVE-2023-44271: Denial of Service that uncontrollably allocates memory to process a given task, potentially causing a service to crash by having it run out of memory. This occurs for truetype in ImageFont when textlength in an ImageDraw instance operates on a long text argument.
https://github.com/python-pillow/Pillow/pull/7244

Pillow before 9.2.0 performs Improper Handling of Highly Compressed GIF Data (Data Amplification).

Pillow 8.1.0 fixes TIFF OOB Write error. CVE-2020-35654 #5175.

Pillow 8.1.0 includes a fix for SGI Decode buffer overrun. CVE-2020-35655 #5173.

Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICO container, and thus an attempted memory allocation can be very large.

Pillow is potentially vulnerable to DoS attacks through PIL.ImageFont.ImageFont.getmask(). A decompression bomb check has also been added to the affected function.

Pillow 8.0.1 updates 'FreeType' used in binary wheels to v2.10.4 to include a security fix.

In libImaging/PcxDecode.c in Pillow before 7.1.0, an out-of-bounds read can occur when reading PCX files where state->shuffle is instructed to read beyond state->buffer.

Pillow version 8.2.0 includes a fix for CVE-2021-28677: For EPS data, the readline implementation used in EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28677-fix-eps-dos-on-open

Pillow 8.1.1 includes a fix for CVE-2021-25289: TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files because of certain interpretation conflicts with LibTIFF in RGBA mode. NOTE: this issue exists because of an incomplete fix for CVE-2020-35654.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pyyaml version 5.4 includes a fix for CVE-2020-14343: A vulnerability was discovered in the PyYAML library in versions before 5.4, where it is susceptible to arbitrary code execution when it processes untrusted YAML files through the full_load method or with the FullLoader loader. Applications that use the library to process untrusted input may be vulnerable to this flaw. This flaw allows an attacker to execute arbitrary code on the system by abusing the python/object/new constructor. This flaw is due to an incomplete fix for CVE-2020-1747.
https://bugzilla.redhat.com/show_bug.cgi?id=1860466

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in inventory.
https://github.com/sphinx-doc/sphinx/issues/8175
https://github.com/sphinx-doc/sphinx/commit/f7b872e673f9b359a61fd287a7338a28077840d2

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in docstring.
https://github.com/sphinx-doc/sphinx/issues/8172
https://github.com/sphinx-doc/sphinx/commit/f00e75278c5999f40b214d8934357fbf0e705417

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sqlparse 0.4.4 includes a fix for CVE-2023-30608: Parser contains a regular expression that is vulnerable to ReDOS (Regular Expression Denial of Service).
https://github.com/andialbrecht/sqlparse/security/advisories/GHSA-rrm6-wvj7-cwh2

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Urllib3 1.26.17 and 2.0.5 include a fix for CVE-2023-43804: Urllib3 doesn't treat the 'Cookie' HTTP header special or provide any helpers for managing cookies over HTTP, that is the responsibility of the user. However, it is possible for a user to specify a 'Cookie' header and unknowingly leak information via HTTP redirects to a different origin if that user doesn't disable redirects explicitly.
https://github.com/urllib3/urllib3/security/advisories/GHSA-v845-jxx5-vc9f

Urllib3 1.26.5 includes a fix for CVE-2021-33503: When provided with a URL containing many @ characters in the authority component, the authority regular expression exhibits catastrophic backtracking, causing a denial of service if a URL were passed as a parameter or redirected to via an HTTP redirect.
https://github.com/advisories/GHSA-q2q7-5pp4-w6pg

Urllib3 1.25.9 includes a fix for CVE-2020-26137: Urllib3 before 1.25.9 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of putrequest(). NOTE: this is similar to CVE-2020-26116.
https://github.com/python/cpython/issues/83784
https://github.com/urllib3/urllib3/pull/1800

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

Affected versions of urllib3 are vulnerable to an HTTP redirect handling vulnerability that fails to remove the HTTP request body when a POST changes to a GET via 301, 302, or 303 responses. This flaw can expose sensitive request data if the origin service is compromised and redirects to a malicious endpoint, though exploitability is low when no sensitive data is used. The vulnerability affects automatic redirect behavior. It is fixed in versions 1.26.18 and 2.0.7; update or disable redirects using redirects=False.
This vulnerability is specific to Python's urllib3 library.

Ipython versions 8.0.1, 7.31.1, 7.16.3 and 5.11 include a fix for CVE-2022-21699: Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine.
https://github.com/ipython/ipython/security/advisories/GHSA-pq7m-3gw7-gq5x

IPython 8.10.0 includes a fix for CVE-2023-24816: Versions prior to 8.10.0 are subject to a command injection vulnerability with very specific prerequisites. This vulnerability requires that the function 'IPython.utils.terminal.set_term_title' be called on Windows in a Python environment where ctypes is not available. The dependency on 'ctypes' in 'IPython.utils._process_win32' prevents the vulnerable code from ever being reached in the ipython binary. However, as a library that could be used by another tool 'set_term_title' could be called and hence introduce a vulnerability. If an attacker get untrusted input to an instance of this function they would be able to inject shell commands as current process and limited to the scope of the current process. As a workaround, users should ensure that any calls to the 'IPython.utils.terminal.set_term_title' function are done with trusted or filtered input.
https://github.com/ipython/ipython/security/advisories/GHSA-29gw-9793-fvw7

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Affected versions of the gunicorn package are vulnerable to HTTP Request/Response Smuggling due to improper validation of the Transfer-Encoding header that enables a TE.CL desynchronisation condition. Gunicorn’s HTTP parser does not consistently enforce RFC semantics when parsing conflicting or unsupported request framing—such as messages containing both Transfer-Encoding and Content-Length—so the backend may fall back to Content-Length while an intermediary treats the message as chunked.

Gunicorn fails to properly validate Transfer-Encoding headers, leading to HTTP Request Smuggling (HRS) vulnerabilities. By crafting requests with conflicting Transfer-Encoding headers, attackers can bypass security restrictions and access restricted endpoints. This issue is due to Gunicorn's handling of Transfer-Encoding headers, where it incorrectly processes requests with multiple, conflicting Transfer-Encoding headers, treating them as chunked regardless of the final encoding specified. This vulnerability allows for a range of attacks including cache poisoning, session manipulation, and data exposure.

A time-based vulnerability in Gunicorn affected versions allows an attacker to disrupt service by manipulating the system clock, causing premature worker timeouts and potential denial-of-service (DoS) conditions. The issue stems from the use of time.time() in the worker timeout logic, which can be exploited if an attacker gains the ability to change the system time.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of Requests are vulnerable to proxy credential leakage. When redirected to an HTTPS endpoint, the Proxy-Authorization header is forwarded to the destination server due to the use of rebuild_proxies to reattach the header. This may allow a malicious actor to exfiltrate sensitive information.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Sentry-sdk 1.14.0 includes a fix for CVE-2023-28117: When using the Django integration of versions prior to 1.14.0 of the Sentry SDK in a specific configuration it is possible to leak sensitive cookies values, including the session cookie to Sentry. These sensitive cookies could then be used by someone with access to your Sentry issues to impersonate or escalate their privileges within your application. In order for these sensitive values to be leaked, the Sentry SDK configuration must have 'sendDefaultPII' set to 'True'; one must use a custom name for either 'SESSION_COOKIE_NAME' or 'CSRF_COOKIE_NAME' in one's Django settings; and one must not be configured in one's organization or project settings to use Sentry's data scrubbing features to account for the custom cookie names. As of version 1.14.0, the Django integration of the 'sentry-sdk' will detect the custom cookie names based on one's Django settings and will remove the values from the payload before sending the data to Sentry. As a workaround, use the SDK's filtering mechanism to remove the cookies from the payload that is sent to Sentry. For error events, this can be done with the 'before_send' callback method and for performance related events (transactions) one can use the 'before_send_transaction' callback method. Those who want to handle filtering of these values on the server-side can also use Sentry's advanced data scrubbing feature to account for the custom cookie names. Look for the '$http.cookies', '$http.headers', '$request.cookies', or '$request.headers' fields to target with a scrubbing rule.
https://github.com/getsentry/sentry-python/security/advisories/GHSA-29pr-6jr8-q5jm

Sentry-sdk 1.4.1 includes a fix for a Race Condition vulnerability.
https://github.com/getsentry/sentry-python/pull/1203

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

A SQL Injection issue in the SQL Panel in Jazzband Django Debug Toolbar before 1.11.1, 2.x before 2.2.1, and 3.x before 3.2.1 allows attackers to execute SQL statements by changing the raw_sql input field of the SQL explain, analyze, or select form. See CVE-2021-30459.

Affected versions of the social-auth-app-django package are vulnerable to Authentication Bypass due to unintended email-based account association during the authentication pipeline. In social_django.storage.create_user (invoked by social_core.pipeline.user.create_user), an IntegrityError during user creation triggers a fallback that returns an existing User looked up by e-mail, effectively performing social_core.pipeline.social_auth.associate_by_email even when that step is disabled.

Python Social Auth is a social authentication/registration mechanism. Prior to version 5.4.1, due to default case-insensitive collation in MySQL or MariaDB databases, third-party authentication user IDs are not case-sensitive and could cause different IDs to match. This issue has been addressed by a fix released in version 5.4.1. An immediate workaround would be to change collation of the affected field. See CVE-2024-32879.

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

Rsa 4.7 includes a fix for CVE-2020-25658: It was found that python-rsa is vulnerable to Bleichenbacher timing attacks. An attacker can use this flaw via the RSA decryption API to decrypt parts of the cipher text encrypted with RSA.

Rsa 4.3 includes a fix for CVE-2020-13757: Python-RSA before 4.3 ignores leading '\0' bytes during decryption of ciphertext. This could conceivably have a security-relevant impact, e.g., by helping an attacker to infer that an application uses Python-RSA, or if the length of accepted ciphertext affects application behavior (such as by causing excessive memory allocation).

Affected versions of Idna are vulnerable to Denial Of Service via the idna.encode(), where a specially crafted argument could lead to significant resource consumption. In version 3.7, this function has been updated to reject such inputs efficiently, minimizing resource use. A practical workaround involves enforcing a maximum domain name length of 253 characters before encoding, as the vulnerability is triggered by unusually large inputs that normal operations wouldn't encounter.

Kombu 5.2.1 updates Amazon sqs dependency 'urllib3' minimum version to 1.26.7 to include security fixes.
https://github.com/celery/kombu/commit/f3b04558fa0df4ecc383c93e0b3b300d95e17c47

PyJWT 2.4.0 includes a fix for CVE-2022-29217: An attacker submitting the JWT token can choose the used signing algorithm. The PyJWT library requires that the application chooses what algorithms are supported. The application can specify 'jwt.algorithms.get_default_algorithms()' to get support for all algorithms, or specify a single algorithm. The issue is not that big as 'algorithms=jwt.algorithms.get_default_algorithms()' has to be used. As a workaround, always be explicit with the algorithms that are accepted and expected when decoding.

Pillow 9.0.0 ensures JpegImagePlugin stops at the end of a truncated file to avoid Denial of Service attacks.
https://github.com/python-pillow/Pillow/pull/5921
https://github.com/advisories/GHSA-4fx9-vc88-q2xc

An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the number of input layers relative to the size of the data block. This could lead to a DoS on Image.open prior to Image.load.

Pillow 8.1.1 includes a fix for CVE-2021-27921: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for a BLP container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the user-supplied stride value is trusted for buffer calculations.

In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0, there are multiple out-of-bounds reads via a crafted JP2 file.

Pillow 8.1.1 includes a fix for CVE-2021-25290: In TiffDecode.c, there is a negative-offset memcpy with an invalid size.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-25293: There is an out-of-bounds read in SGIRleDecode.c.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 10.0.1 updates its C dependency 'libwebp' to 1.3.2 to include a fix for a high-risk vulnerability.
https://pillow.readthedocs.io/en/stable/releasenotes/10.0.1.html

Pillow 9.0.0 excludes carriage return in PDF regex to help prevent ReDoS.
https://github.com/python-pillow/Pillow/pull/5912
https://github.com/python-pillow/Pillow/commit/43b800d933c996226e4d7df00c33fcbe46d97363

Pillow before 9.0.1 allows attackers to delete files because spaces in temporary pathnames are mishandled.

Pillow 8.1.1 includes a fix for CVE-2021-25292: The PDF parser allows a regular expression DoS (ReDoS) attack via a crafted PDF file because of a catastrophic backtracking regex.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.2.0 includes a fix for CVE-2021-25288: There is an out-of-bounds read in J2kDecode, in j2ku_gray_i.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

In Pillow before 7.1.0, there are two Buffer Overflows in libImaging/TiffDecode.c.

Pillow 8.1.1 includes a fix for CVE-2021-25291: In TiffDecode.c, there is an out-of-bounds read in TiffreadRGBATile via invalid tile boundaries.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-27922: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICNS container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow version 8.2.0 includes a fix for CVE-2021-28678: For BLP data, BlpImagePlugin did not properly check that reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be run a large number of times on empty data.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28678-fix-blp-dos

In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a number of out-of-bounds reads exist in the parsing of SGI image files, a different issue than CVE-2020-5311.

Pillow before 7.1.0 has multiple out-of-bounds reads in libImaging/FliDecode.c.

Pillow 9.0.0 includes a fix for CVE-2022-22815: path_getbbox in path.c in Pillow before 9.0.0 improperly initializes ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow 9.0.1 includes a fix for CVE-2022-22817: PIL.ImageMath.eval in Pillow before 9.0.0 allows evaluation of arbitrary expressions, such as ones that use the Python exec method. A first patch was issued for version 9.0.0 but it did not prevent builtins available to lambda expressions.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.1.html#security

Pillow version 8.2.0 includes a fix for CVE-2021-28676: For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28676-fix-fli-dos

Pillow 8.2.0 includes a fix for CVE-2021-25287: There is an out-of-bounds read in J2kDecode, in j2ku_graya_la.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

Pillow 9.0.0 includes a fix for CVE-2022-22816: path_getbbox in path.c in Pillow before 9.0.0 has a buffer over-read during initialization of ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow 8.3.0 includes a fix for CVE-2021-34552: Pillow through 8.2.0 and PIL (also known as Python Imaging Library) through 1.1.7 allow an attacker to pass controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.0.html#buffer-overflow
https://pillow.readthedocs.io/en/stable/releasenotes/index.html

Pillow 10.3.0 introduces a security update addressing CVE-2024-28219 by replacing certain functions with strncpy to prevent buffer overflow issues.

Pillow from 5.2.0 and before 8.3.2 is vulnerable to Regular Expression Denial of Service (ReDoS) via the getrgb function.
https://github.com/python-pillow/Pillow/commit/9e08eb8f78fdfd2f476e1b20b7cf38683754866b
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.2.html

Pillow is affected by an arbitrary code execution vulnerability. If an attacker has control over the keys passed to the environment argument of PIL.ImageMath.eval(), they may be able to execute arbitrary code.
https://pillow.readthedocs.io/en/stable/releasenotes/10.2.0.html

Pillow 10.0.0 includes a fix for CVE-2023-44271: Denial of Service that uncontrollably allocates memory to process a given task, potentially causing a service to crash by having it run out of memory. This occurs for truetype in ImageFont when textlength in an ImageDraw instance operates on a long text argument.
https://github.com/python-pillow/Pillow/pull/7244

Pillow before 9.2.0 performs Improper Handling of Highly Compressed GIF Data (Data Amplification).

Pillow 8.1.0 fixes TIFF OOB Write error. CVE-2020-35654 #5175.

Pillow 8.1.0 includes a fix for SGI Decode buffer overrun. CVE-2020-35655 #5173.

Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICO container, and thus an attempted memory allocation can be very large.

Pillow is potentially vulnerable to DoS attacks through PIL.ImageFont.ImageFont.getmask(). A decompression bomb check has also been added to the affected function.

Pillow 8.0.1 updates 'FreeType' used in binary wheels to v2.10.4 to include a security fix.

In libImaging/PcxDecode.c in Pillow before 7.1.0, an out-of-bounds read can occur when reading PCX files where state->shuffle is instructed to read beyond state->buffer.

Pillow version 8.2.0 includes a fix for CVE-2021-28677: For EPS data, the readline implementation used in EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28677-fix-eps-dos-on-open

Pillow 8.1.1 includes a fix for CVE-2021-25289: TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files because of certain interpretation conflicts with LibTIFF in RGBA mode. NOTE: this issue exists because of an incomplete fix for CVE-2020-35654.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pyyaml version 5.4 includes a fix for CVE-2020-14343: A vulnerability was discovered in the PyYAML library in versions before 5.4, where it is susceptible to arbitrary code execution when it processes untrusted YAML files through the full_load method or with the FullLoader loader. Applications that use the library to process untrusted input may be vulnerable to this flaw. This flaw allows an attacker to execute arbitrary code on the system by abusing the python/object/new constructor. This flaw is due to an incomplete fix for CVE-2020-1747.
https://bugzilla.redhat.com/show_bug.cgi?id=1860466

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in inventory.
https://github.com/sphinx-doc/sphinx/issues/8175
https://github.com/sphinx-doc/sphinx/commit/f7b872e673f9b359a61fd287a7338a28077840d2

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in docstring.
https://github.com/sphinx-doc/sphinx/issues/8172
https://github.com/sphinx-doc/sphinx/commit/f00e75278c5999f40b214d8934357fbf0e705417

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sqlparse 0.4.4 includes a fix for CVE-2023-30608: Parser contains a regular expression that is vulnerable to ReDOS (Regular Expression Denial of Service).
https://github.com/andialbrecht/sqlparse/security/advisories/GHSA-rrm6-wvj7-cwh2

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Urllib3 1.26.17 and 2.0.5 include a fix for CVE-2023-43804: Urllib3 doesn't treat the 'Cookie' HTTP header special or provide any helpers for managing cookies over HTTP, that is the responsibility of the user. However, it is possible for a user to specify a 'Cookie' header and unknowingly leak information via HTTP redirects to a different origin if that user doesn't disable redirects explicitly.
https://github.com/urllib3/urllib3/security/advisories/GHSA-v845-jxx5-vc9f

Urllib3 1.26.5 includes a fix for CVE-2021-33503: When provided with a URL containing many @ characters in the authority component, the authority regular expression exhibits catastrophic backtracking, causing a denial of service if a URL were passed as a parameter or redirected to via an HTTP redirect.
https://github.com/advisories/GHSA-q2q7-5pp4-w6pg

Urllib3 1.25.9 includes a fix for CVE-2020-26137: Urllib3 before 1.25.9 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of putrequest(). NOTE: this is similar to CVE-2020-26116.
https://github.com/python/cpython/issues/83784
https://github.com/urllib3/urllib3/pull/1800

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

Affected versions of urllib3 are vulnerable to an HTTP redirect handling vulnerability that fails to remove the HTTP request body when a POST changes to a GET via 301, 302, or 303 responses. This flaw can expose sensitive request data if the origin service is compromised and redirects to a malicious endpoint, though exploitability is low when no sensitive data is used. The vulnerability affects automatic redirect behavior. It is fixed in versions 1.26.18 and 2.0.7; update or disable redirects using redirects=False.
This vulnerability is specific to Python's urllib3 library.

Ipython versions 8.0.1, 7.31.1, 7.16.3 and 5.11 include a fix for CVE-2022-21699: Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine.
https://github.com/ipython/ipython/security/advisories/GHSA-pq7m-3gw7-gq5x

IPython 8.10.0 includes a fix for CVE-2023-24816: Versions prior to 8.10.0 are subject to a command injection vulnerability with very specific prerequisites. This vulnerability requires that the function 'IPython.utils.terminal.set_term_title' be called on Windows in a Python environment where ctypes is not available. The dependency on 'ctypes' in 'IPython.utils._process_win32' prevents the vulnerable code from ever being reached in the ipython binary. However, as a library that could be used by another tool 'set_term_title' could be called and hence introduce a vulnerability. If an attacker get untrusted input to an instance of this function they would be able to inject shell commands as current process and limited to the scope of the current process. As a workaround, users should ensure that any calls to the 'IPython.utils.terminal.set_term_title' function are done with trusted or filtered input.
https://github.com/ipython/ipython/security/advisories/GHSA-29gw-9793-fvw7

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Affected versions of the gunicorn package are vulnerable to HTTP Request/Response Smuggling due to improper validation of the Transfer-Encoding header that enables a TE.CL desynchronisation condition. Gunicorn’s HTTP parser does not consistently enforce RFC semantics when parsing conflicting or unsupported request framing—such as messages containing both Transfer-Encoding and Content-Length—so the backend may fall back to Content-Length while an intermediary treats the message as chunked.

Gunicorn fails to properly validate Transfer-Encoding headers, leading to HTTP Request Smuggling (HRS) vulnerabilities. By crafting requests with conflicting Transfer-Encoding headers, attackers can bypass security restrictions and access restricted endpoints. This issue is due to Gunicorn's handling of Transfer-Encoding headers, where it incorrectly processes requests with multiple, conflicting Transfer-Encoding headers, treating them as chunked regardless of the final encoding specified. This vulnerability allows for a range of attacks including cache poisoning, session manipulation, and data exposure.

A time-based vulnerability in Gunicorn affected versions allows an attacker to disrupt service by manipulating the system clock, causing premature worker timeouts and potential denial-of-service (DoS) conditions. The issue stems from the use of time.time() in the worker timeout logic, which can be exploited if an attacker gains the ability to change the system time.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of Requests are vulnerable to proxy credential leakage. When redirected to an HTTPS endpoint, the Proxy-Authorization header is forwarded to the destination server due to the use of rebuild_proxies to reattach the header. This may allow a malicious actor to exfiltrate sensitive information.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Sentry-sdk 1.14.0 includes a fix for CVE-2023-28117: When using the Django integration of versions prior to 1.14.0 of the Sentry SDK in a specific configuration it is possible to leak sensitive cookies values, including the session cookie to Sentry. These sensitive cookies could then be used by someone with access to your Sentry issues to impersonate or escalate their privileges within your application. In order for these sensitive values to be leaked, the Sentry SDK configuration must have 'sendDefaultPII' set to 'True'; one must use a custom name for either 'SESSION_COOKIE_NAME' or 'CSRF_COOKIE_NAME' in one's Django settings; and one must not be configured in one's organization or project settings to use Sentry's data scrubbing features to account for the custom cookie names. As of version 1.14.0, the Django integration of the 'sentry-sdk' will detect the custom cookie names based on one's Django settings and will remove the values from the payload before sending the data to Sentry. As a workaround, use the SDK's filtering mechanism to remove the cookies from the payload that is sent to Sentry. For error events, this can be done with the 'before_send' callback method and for performance related events (transactions) one can use the 'before_send_transaction' callback method. Those who want to handle filtering of these values on the server-side can also use Sentry's advanced data scrubbing feature to account for the custom cookie names. Look for the '$http.cookies', '$http.headers', '$request.cookies', or '$request.headers' fields to target with a scrubbing rule.
https://github.com/getsentry/sentry-python/security/advisories/GHSA-29pr-6jr8-q5jm

Sentry-sdk 1.4.1 includes a fix for a Race Condition vulnerability.
https://github.com/getsentry/sentry-python/pull/1203

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

A SQL Injection issue in the SQL Panel in Jazzband Django Debug Toolbar before 1.11.1, 2.x before 2.2.1, and 3.x before 3.2.1 allows attackers to execute SQL statements by changing the raw_sql input field of the SQL explain, analyze, or select form. See CVE-2021-30459.

Affected versions of the social-auth-app-django package are vulnerable to Authentication Bypass due to unintended email-based account association during the authentication pipeline. In social_django.storage.create_user (invoked by social_core.pipeline.user.create_user), an IntegrityError during user creation triggers a fallback that returns an existing User looked up by e-mail, effectively performing social_core.pipeline.social_auth.associate_by_email even when that step is disabled.

Python Social Auth is a social authentication/registration mechanism. Prior to version 5.4.1, due to default case-insensitive collation in MySQL or MariaDB databases, third-party authentication user IDs are not case-sensitive and could cause different IDs to match. This issue has been addressed by a fix released in version 5.4.1. An immediate workaround would be to change collation of the affected field. See CVE-2024-32879.

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

Rsa 4.7 includes a fix for CVE-2020-25658: It was found that python-rsa is vulnerable to Bleichenbacher timing attacks. An attacker can use this flaw via the RSA decryption API to decrypt parts of the cipher text encrypted with RSA.

Rsa 4.3 includes a fix for CVE-2020-13757: Python-RSA before 4.3 ignores leading '\0' bytes during decryption of ciphertext. This could conceivably have a security-relevant impact, e.g., by helping an attacker to infer that an application uses Python-RSA, or if the length of accepted ciphertext affects application behavior (such as by causing excessive memory allocation).

Affected versions of Idna are vulnerable to Denial Of Service via the idna.encode(), where a specially crafted argument could lead to significant resource consumption. In version 3.7, this function has been updated to reject such inputs efficiently, minimizing resource use. A practical workaround involves enforcing a maximum domain name length of 253 characters before encoding, as the vulnerability is triggered by unusually large inputs that normal operations wouldn't encounter.

Kombu 5.2.1 updates Amazon sqs dependency 'urllib3' minimum version to 1.26.7 to include security fixes.
https://github.com/celery/kombu/commit/f3b04558fa0df4ecc383c93e0b3b300d95e17c47

PyJWT 2.4.0 includes a fix for CVE-2022-29217: An attacker submitting the JWT token can choose the used signing algorithm. The PyJWT library requires that the application chooses what algorithms are supported. The application can specify 'jwt.algorithms.get_default_algorithms()' to get support for all algorithms, or specify a single algorithm. The issue is not that big as 'algorithms=jwt.algorithms.get_default_algorithms()' has to be used. As a workaround, always be explicit with the algorithms that are accepted and expected when decoding.

Pillow 9.0.0 ensures JpegImagePlugin stops at the end of a truncated file to avoid Denial of Service attacks.
https://github.com/python-pillow/Pillow/pull/5921
https://github.com/advisories/GHSA-4fx9-vc88-q2xc

An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the number of input layers relative to the size of the data block. This could lead to a DoS on Image.open prior to Image.load.

Pillow 8.1.1 includes a fix for CVE-2021-27921: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for a BLP container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the user-supplied stride value is trusted for buffer calculations.

In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0, there are multiple out-of-bounds reads via a crafted JP2 file.

Pillow 8.1.1 includes a fix for CVE-2021-25290: In TiffDecode.c, there is a negative-offset memcpy with an invalid size.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-25293: There is an out-of-bounds read in SGIRleDecode.c.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 10.0.1 updates its C dependency 'libwebp' to 1.3.2 to include a fix for a high-risk vulnerability.
https://pillow.readthedocs.io/en/stable/releasenotes/10.0.1.html

Pillow 9.0.0 excludes carriage return in PDF regex to help prevent ReDoS.
https://github.com/python-pillow/Pillow/pull/5912
https://github.com/python-pillow/Pillow/commit/43b800d933c996226e4d7df00c33fcbe46d97363

Pillow before 9.0.1 allows attackers to delete files because spaces in temporary pathnames are mishandled.

Pillow 8.1.1 includes a fix for CVE-2021-25292: The PDF parser allows a regular expression DoS (ReDoS) attack via a crafted PDF file because of a catastrophic backtracking regex.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.2.0 includes a fix for CVE-2021-25288: There is an out-of-bounds read in J2kDecode, in j2ku_gray_i.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

In Pillow before 7.1.0, there are two Buffer Overflows in libImaging/TiffDecode.c.

Pillow 8.1.1 includes a fix for CVE-2021-25291: In TiffDecode.c, there is an out-of-bounds read in TiffreadRGBATile via invalid tile boundaries.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-27922: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICNS container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow version 8.2.0 includes a fix for CVE-2021-28678: For BLP data, BlpImagePlugin did not properly check that reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be run a large number of times on empty data.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28678-fix-blp-dos

In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a number of out-of-bounds reads exist in the parsing of SGI image files, a different issue than CVE-2020-5311.

Pillow before 7.1.0 has multiple out-of-bounds reads in libImaging/FliDecode.c.

Pillow 9.0.0 includes a fix for CVE-2022-22815: path_getbbox in path.c in Pillow before 9.0.0 improperly initializes ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow 9.0.1 includes a fix for CVE-2022-22817: PIL.ImageMath.eval in Pillow before 9.0.0 allows evaluation of arbitrary expressions, such as ones that use the Python exec method. A first patch was issued for version 9.0.0 but it did not prevent builtins available to lambda expressions.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.1.html#security

Pillow version 8.2.0 includes a fix for CVE-2021-28676: For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28676-fix-fli-dos

Pillow 8.2.0 includes a fix for CVE-2021-25287: There is an out-of-bounds read in J2kDecode, in j2ku_graya_la.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

Pillow 9.0.0 includes a fix for CVE-2022-22816: path_getbbox in path.c in Pillow before 9.0.0 has a buffer over-read during initialization of ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow 8.3.0 includes a fix for CVE-2021-34552: Pillow through 8.2.0 and PIL (also known as Python Imaging Library) through 1.1.7 allow an attacker to pass controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.0.html#buffer-overflow
https://pillow.readthedocs.io/en/stable/releasenotes/index.html

Pillow 10.3.0 introduces a security update addressing CVE-2024-28219 by replacing certain functions with strncpy to prevent buffer overflow issues.

Pillow from 5.2.0 and before 8.3.2 is vulnerable to Regular Expression Denial of Service (ReDoS) via the getrgb function.
https://github.com/python-pillow/Pillow/commit/9e08eb8f78fdfd2f476e1b20b7cf38683754866b
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.2.html

Pillow is affected by an arbitrary code execution vulnerability. If an attacker has control over the keys passed to the environment argument of PIL.ImageMath.eval(), they may be able to execute arbitrary code.
https://pillow.readthedocs.io/en/stable/releasenotes/10.2.0.html

Pillow 10.0.0 includes a fix for CVE-2023-44271: Denial of Service that uncontrollably allocates memory to process a given task, potentially causing a service to crash by having it run out of memory. This occurs for truetype in ImageFont when textlength in an ImageDraw instance operates on a long text argument.
https://github.com/python-pillow/Pillow/pull/7244

Pillow before 9.2.0 performs Improper Handling of Highly Compressed GIF Data (Data Amplification).

Pillow 8.1.0 fixes TIFF OOB Write error. CVE-2020-35654 #5175.

Pillow 8.1.0 includes a fix for SGI Decode buffer overrun. CVE-2020-35655 #5173.

Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICO container, and thus an attempted memory allocation can be very large.

Pillow is potentially vulnerable to DoS attacks through PIL.ImageFont.ImageFont.getmask(). A decompression bomb check has also been added to the affected function.

Pillow 8.0.1 updates 'FreeType' used in binary wheels to v2.10.4 to include a security fix.

In libImaging/PcxDecode.c in Pillow before 7.1.0, an out-of-bounds read can occur when reading PCX files where state->shuffle is instructed to read beyond state->buffer.

Pillow version 8.2.0 includes a fix for CVE-2021-28677: For EPS data, the readline implementation used in EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28677-fix-eps-dos-on-open

Pillow 8.1.1 includes a fix for CVE-2021-25289: TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files because of certain interpretation conflicts with LibTIFF in RGBA mode. NOTE: this issue exists because of an incomplete fix for CVE-2020-35654.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pyyaml version 5.4 includes a fix for CVE-2020-14343: A vulnerability was discovered in the PyYAML library in versions before 5.4, where it is susceptible to arbitrary code execution when it processes untrusted YAML files through the full_load method or with the FullLoader loader. Applications that use the library to process untrusted input may be vulnerable to this flaw. This flaw allows an attacker to execute arbitrary code on the system by abusing the python/object/new constructor. This flaw is due to an incomplete fix for CVE-2020-1747.
https://bugzilla.redhat.com/show_bug.cgi?id=1860466

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in inventory.
https://github.com/sphinx-doc/sphinx/issues/8175
https://github.com/sphinx-doc/sphinx/commit/f7b872e673f9b359a61fd287a7338a28077840d2

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in docstring.
https://github.com/sphinx-doc/sphinx/issues/8172
https://github.com/sphinx-doc/sphinx/commit/f00e75278c5999f40b214d8934357fbf0e705417

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sqlparse 0.4.4 includes a fix for CVE-2023-30608: Parser contains a regular expression that is vulnerable to ReDOS (Regular Expression Denial of Service).
https://github.com/andialbrecht/sqlparse/security/advisories/GHSA-rrm6-wvj7-cwh2

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Urllib3 1.26.17 and 2.0.5 include a fix for CVE-2023-43804: Urllib3 doesn't treat the 'Cookie' HTTP header special or provide any helpers for managing cookies over HTTP, that is the responsibility of the user. However, it is possible for a user to specify a 'Cookie' header and unknowingly leak information via HTTP redirects to a different origin if that user doesn't disable redirects explicitly.
https://github.com/urllib3/urllib3/security/advisories/GHSA-v845-jxx5-vc9f

Urllib3 1.26.5 includes a fix for CVE-2021-33503: When provided with a URL containing many @ characters in the authority component, the authority regular expression exhibits catastrophic backtracking, causing a denial of service if a URL were passed as a parameter or redirected to via an HTTP redirect.
https://github.com/advisories/GHSA-q2q7-5pp4-w6pg

Urllib3 1.25.9 includes a fix for CVE-2020-26137: Urllib3 before 1.25.9 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of putrequest(). NOTE: this is similar to CVE-2020-26116.
https://github.com/python/cpython/issues/83784
https://github.com/urllib3/urllib3/pull/1800

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

Affected versions of urllib3 are vulnerable to an HTTP redirect handling vulnerability that fails to remove the HTTP request body when a POST changes to a GET via 301, 302, or 303 responses. This flaw can expose sensitive request data if the origin service is compromised and redirects to a malicious endpoint, though exploitability is low when no sensitive data is used. The vulnerability affects automatic redirect behavior. It is fixed in versions 1.26.18 and 2.0.7; update or disable redirects using redirects=False.
This vulnerability is specific to Python's urllib3 library.

Ipython versions 8.0.1, 7.31.1, 7.16.3 and 5.11 include a fix for CVE-2022-21699: Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine.
https://github.com/ipython/ipython/security/advisories/GHSA-pq7m-3gw7-gq5x

IPython 8.10.0 includes a fix for CVE-2023-24816: Versions prior to 8.10.0 are subject to a command injection vulnerability with very specific prerequisites. This vulnerability requires that the function 'IPython.utils.terminal.set_term_title' be called on Windows in a Python environment where ctypes is not available. The dependency on 'ctypes' in 'IPython.utils._process_win32' prevents the vulnerable code from ever being reached in the ipython binary. However, as a library that could be used by another tool 'set_term_title' could be called and hence introduce a vulnerability. If an attacker get untrusted input to an instance of this function they would be able to inject shell commands as current process and limited to the scope of the current process. As a workaround, users should ensure that any calls to the 'IPython.utils.terminal.set_term_title' function are done with trusted or filtered input.
https://github.com/ipython/ipython/security/advisories/GHSA-29gw-9793-fvw7

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Affected versions of the gunicorn package are vulnerable to HTTP Request/Response Smuggling due to improper validation of the Transfer-Encoding header that enables a TE.CL desynchronisation condition. Gunicorn’s HTTP parser does not consistently enforce RFC semantics when parsing conflicting or unsupported request framing—such as messages containing both Transfer-Encoding and Content-Length—so the backend may fall back to Content-Length while an intermediary treats the message as chunked.

Gunicorn fails to properly validate Transfer-Encoding headers, leading to HTTP Request Smuggling (HRS) vulnerabilities. By crafting requests with conflicting Transfer-Encoding headers, attackers can bypass security restrictions and access restricted endpoints. This issue is due to Gunicorn's handling of Transfer-Encoding headers, where it incorrectly processes requests with multiple, conflicting Transfer-Encoding headers, treating them as chunked regardless of the final encoding specified. This vulnerability allows for a range of attacks including cache poisoning, session manipulation, and data exposure.

A time-based vulnerability in Gunicorn affected versions allows an attacker to disrupt service by manipulating the system clock, causing premature worker timeouts and potential denial-of-service (DoS) conditions. The issue stems from the use of time.time() in the worker timeout logic, which can be exploited if an attacker gains the ability to change the system time.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of Requests are vulnerable to proxy credential leakage. When redirected to an HTTPS endpoint, the Proxy-Authorization header is forwarded to the destination server due to the use of rebuild_proxies to reattach the header. This may allow a malicious actor to exfiltrate sensitive information.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Sentry-sdk 1.14.0 includes a fix for CVE-2023-28117: When using the Django integration of versions prior to 1.14.0 of the Sentry SDK in a specific configuration it is possible to leak sensitive cookies values, including the session cookie to Sentry. These sensitive cookies could then be used by someone with access to your Sentry issues to impersonate or escalate their privileges within your application. In order for these sensitive values to be leaked, the Sentry SDK configuration must have 'sendDefaultPII' set to 'True'; one must use a custom name for either 'SESSION_COOKIE_NAME' or 'CSRF_COOKIE_NAME' in one's Django settings; and one must not be configured in one's organization or project settings to use Sentry's data scrubbing features to account for the custom cookie names. As of version 1.14.0, the Django integration of the 'sentry-sdk' will detect the custom cookie names based on one's Django settings and will remove the values from the payload before sending the data to Sentry. As a workaround, use the SDK's filtering mechanism to remove the cookies from the payload that is sent to Sentry. For error events, this can be done with the 'before_send' callback method and for performance related events (transactions) one can use the 'before_send_transaction' callback method. Those who want to handle filtering of these values on the server-side can also use Sentry's advanced data scrubbing feature to account for the custom cookie names. Look for the '$http.cookies', '$http.headers', '$request.cookies', or '$request.headers' fields to target with a scrubbing rule.
https://github.com/getsentry/sentry-python/security/advisories/GHSA-29pr-6jr8-q5jm

Sentry-sdk 1.4.1 includes a fix for a Race Condition vulnerability.
https://github.com/getsentry/sentry-python/pull/1203

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

A SQL Injection issue in the SQL Panel in Jazzband Django Debug Toolbar before 1.11.1, 2.x before 2.2.1, and 3.x before 3.2.1 allows attackers to execute SQL statements by changing the raw_sql input field of the SQL explain, analyze, or select form. See CVE-2021-30459.

Affected versions of the package djangorestframework are vulnerable to Cross-site Scripting (XSS) via the break_long_headers template filter due to improper input sanitization before splitting and joining with <br> tags.

A flaw was found in Django REST Framework versions before 3.12.0 and before 3.11.2. When using the browseable API viewer, Django REST Framework fails to properly escape certain strings that can come from user input. This allows a user who can control those strings to inject malicious <script> tags, leading to a cross-site-scripting (XSS) vulnerability.

Affected versions of the social-auth-app-django package are vulnerable to Authentication Bypass due to unintended email-based account association during the authentication pipeline. In social_django.storage.create_user (invoked by social_core.pipeline.user.create_user), an IntegrityError during user creation triggers a fallback that returns an existing User looked up by e-mail, effectively performing social_core.pipeline.social_auth.associate_by_email even when that step is disabled.

Python Social Auth is a social authentication/registration mechanism. Prior to version 5.4.1, due to default case-insensitive collation in MySQL or MariaDB databases, third-party authentication user IDs are not case-sensitive and could cause different IDs to match. This issue has been addressed by a fix released in version 5.4.1. An immediate workaround would be to change collation of the affected field. See CVE-2024-32879.

Rsa 4.7 includes a fix for CVE-2020-25658: It was found that python-rsa is vulnerable to Bleichenbacher timing attacks. An attacker can use this flaw via the RSA decryption API to decrypt parts of the cipher text encrypted with RSA.

Rsa 4.3 includes a fix for CVE-2020-13757: Python-RSA before 4.3 ignores leading '\0' bytes during decryption of ciphertext. This could conceivably have a security-relevant impact, e.g., by helping an attacker to infer that an application uses Python-RSA, or if the length of accepted ciphertext affects application behavior (such as by causing excessive memory allocation).

Affected versions of Idna are vulnerable to Denial Of Service via the idna.encode(), where a specially crafted argument could lead to significant resource consumption. In version 3.7, this function has been updated to reject such inputs efficiently, minimizing resource use. A practical workaround involves enforcing a maximum domain name length of 253 characters before encoding, as the vulnerability is triggered by unusually large inputs that normal operations wouldn't encounter.

Kombu 5.2.1 updates Amazon sqs dependency 'urllib3' minimum version to 1.26.7 to include security fixes.
https://github.com/celery/kombu/commit/f3b04558fa0df4ecc383c93e0b3b300d95e17c47

PyJWT 2.4.0 includes a fix for CVE-2022-29217: An attacker submitting the JWT token can choose the used signing algorithm. The PyJWT library requires that the application chooses what algorithms are supported. The application can specify 'jwt.algorithms.get_default_algorithms()' to get support for all algorithms, or specify a single algorithm. The issue is not that big as 'algorithms=jwt.algorithms.get_default_algorithms()' has to be used. As a workaround, always be explicit with the algorithms that are accepted and expected when decoding.

Pillow 9.0.0 ensures JpegImagePlugin stops at the end of a truncated file to avoid Denial of Service attacks.
https://github.com/python-pillow/Pillow/pull/5921
https://github.com/advisories/GHSA-4fx9-vc88-q2xc

An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the number of input layers relative to the size of the data block. This could lead to a DoS on Image.open prior to Image.load.

Pillow 8.1.1 includes a fix for CVE-2021-27921: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for a BLP container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the user-supplied stride value is trusted for buffer calculations.

In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0, there are multiple out-of-bounds reads via a crafted JP2 file.

Pillow 8.1.1 includes a fix for CVE-2021-25290: In TiffDecode.c, there is a negative-offset memcpy with an invalid size.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-25293: There is an out-of-bounds read in SGIRleDecode.c.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 10.0.1 updates its C dependency 'libwebp' to 1.3.2 to include a fix for a high-risk vulnerability.
https://pillow.readthedocs.io/en/stable/releasenotes/10.0.1.html

Pillow 9.0.0 excludes carriage return in PDF regex to help prevent ReDoS.
https://github.com/python-pillow/Pillow/pull/5912
https://github.com/python-pillow/Pillow/commit/43b800d933c996226e4d7df00c33fcbe46d97363

Pillow before 9.0.1 allows attackers to delete files because spaces in temporary pathnames are mishandled.

Pillow 8.1.1 includes a fix for CVE-2021-25292: The PDF parser allows a regular expression DoS (ReDoS) attack via a crafted PDF file because of a catastrophic backtracking regex.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.2.0 includes a fix for CVE-2021-25288: There is an out-of-bounds read in J2kDecode, in j2ku_gray_i.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

In Pillow before 7.1.0, there are two Buffer Overflows in libImaging/TiffDecode.c.

Pillow 8.1.1 includes a fix for CVE-2021-25291: In TiffDecode.c, there is an out-of-bounds read in TiffreadRGBATile via invalid tile boundaries.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-27922: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICNS container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow version 8.2.0 includes a fix for CVE-2021-28678: For BLP data, BlpImagePlugin did not properly check that reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be run a large number of times on empty data.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28678-fix-blp-dos

In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a number of out-of-bounds reads exist in the parsing of SGI image files, a different issue than CVE-2020-5311.

Pillow before 7.1.0 has multiple out-of-bounds reads in libImaging/FliDecode.c.

Pillow 9.0.0 includes a fix for CVE-2022-22815: path_getbbox in path.c in Pillow before 9.0.0 improperly initializes ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow 9.0.1 includes a fix for CVE-2022-22817: PIL.ImageMath.eval in Pillow before 9.0.0 allows evaluation of arbitrary expressions, such as ones that use the Python exec method. A first patch was issued for version 9.0.0 but it did not prevent builtins available to lambda expressions.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.1.html#security

Pillow version 8.2.0 includes a fix for CVE-2021-28676: For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28676-fix-fli-dos

Pillow 8.2.0 includes a fix for CVE-2021-25287: There is an out-of-bounds read in J2kDecode, in j2ku_graya_la.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

Pillow 9.0.0 includes a fix for CVE-2022-22816: path_getbbox in path.c in Pillow before 9.0.0 has a buffer over-read during initialization of ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow 8.3.0 includes a fix for CVE-2021-34552: Pillow through 8.2.0 and PIL (also known as Python Imaging Library) through 1.1.7 allow an attacker to pass controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.0.html#buffer-overflow
https://pillow.readthedocs.io/en/stable/releasenotes/index.html

Pillow 10.3.0 introduces a security update addressing CVE-2024-28219 by replacing certain functions with strncpy to prevent buffer overflow issues.

Pillow from 5.2.0 and before 8.3.2 is vulnerable to Regular Expression Denial of Service (ReDoS) via the getrgb function.
https://github.com/python-pillow/Pillow/commit/9e08eb8f78fdfd2f476e1b20b7cf38683754866b
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.2.html

Pillow is affected by an arbitrary code execution vulnerability. If an attacker has control over the keys passed to the environment argument of PIL.ImageMath.eval(), they may be able to execute arbitrary code.
https://pillow.readthedocs.io/en/stable/releasenotes/10.2.0.html

Pillow 10.0.0 includes a fix for CVE-2023-44271: Denial of Service that uncontrollably allocates memory to process a given task, potentially causing a service to crash by having it run out of memory. This occurs for truetype in ImageFont when textlength in an ImageDraw instance operates on a long text argument.
https://github.com/python-pillow/Pillow/pull/7244

Pillow before 9.2.0 performs Improper Handling of Highly Compressed GIF Data (Data Amplification).

Pillow 8.1.0 fixes TIFF OOB Write error. CVE-2020-35654 #5175.

Pillow 8.1.0 includes a fix for SGI Decode buffer overrun. CVE-2020-35655 #5173.

Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICO container, and thus an attempted memory allocation can be very large.

Pillow is potentially vulnerable to DoS attacks through PIL.ImageFont.ImageFont.getmask(). A decompression bomb check has also been added to the affected function.

Pillow 8.0.1 updates 'FreeType' used in binary wheels to v2.10.4 to include a security fix.

In libImaging/PcxDecode.c in Pillow before 7.1.0, an out-of-bounds read can occur when reading PCX files where state->shuffle is instructed to read beyond state->buffer.

Pillow version 8.2.0 includes a fix for CVE-2021-28677: For EPS data, the readline implementation used in EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28677-fix-eps-dos-on-open

Pillow 8.1.1 includes a fix for CVE-2021-25289: TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files because of certain interpretation conflicts with LibTIFF in RGBA mode. NOTE: this issue exists because of an incomplete fix for CVE-2020-35654.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pyyaml version 5.4 includes a fix for CVE-2020-14343: A vulnerability was discovered in the PyYAML library in versions before 5.4, where it is susceptible to arbitrary code execution when it processes untrusted YAML files through the full_load method or with the FullLoader loader. Applications that use the library to process untrusted input may be vulnerable to this flaw. This flaw allows an attacker to execute arbitrary code on the system by abusing the python/object/new constructor. This flaw is due to an incomplete fix for CVE-2020-1747.
https://bugzilla.redhat.com/show_bug.cgi?id=1860466

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in inventory.
https://github.com/sphinx-doc/sphinx/issues/8175
https://github.com/sphinx-doc/sphinx/commit/f7b872e673f9b359a61fd287a7338a28077840d2

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in docstring.
https://github.com/sphinx-doc/sphinx/issues/8172
https://github.com/sphinx-doc/sphinx/commit/f00e75278c5999f40b214d8934357fbf0e705417

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sqlparse 0.4.4 includes a fix for CVE-2023-30608: Parser contains a regular expression that is vulnerable to ReDOS (Regular Expression Denial of Service).
https://github.com/andialbrecht/sqlparse/security/advisories/GHSA-rrm6-wvj7-cwh2

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Urllib3 1.26.17 and 2.0.5 include a fix for CVE-2023-43804: Urllib3 doesn't treat the 'Cookie' HTTP header special or provide any helpers for managing cookies over HTTP, that is the responsibility of the user. However, it is possible for a user to specify a 'Cookie' header and unknowingly leak information via HTTP redirects to a different origin if that user doesn't disable redirects explicitly.
https://github.com/urllib3/urllib3/security/advisories/GHSA-v845-jxx5-vc9f

Urllib3 1.26.5 includes a fix for CVE-2021-33503: When provided with a URL containing many @ characters in the authority component, the authority regular expression exhibits catastrophic backtracking, causing a denial of service if a URL were passed as a parameter or redirected to via an HTTP redirect.
https://github.com/advisories/GHSA-q2q7-5pp4-w6pg

Urllib3 1.25.9 includes a fix for CVE-2020-26137: Urllib3 before 1.25.9 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of putrequest(). NOTE: this is similar to CVE-2020-26116.
https://github.com/python/cpython/issues/83784
https://github.com/urllib3/urllib3/pull/1800

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

Affected versions of urllib3 are vulnerable to an HTTP redirect handling vulnerability that fails to remove the HTTP request body when a POST changes to a GET via 301, 302, or 303 responses. This flaw can expose sensitive request data if the origin service is compromised and redirects to a malicious endpoint, though exploitability is low when no sensitive data is used. The vulnerability affects automatic redirect behavior. It is fixed in versions 1.26.18 and 2.0.7; update or disable redirects using redirects=False.
This vulnerability is specific to Python's urllib3 library.

Ipython versions 8.0.1, 7.31.1, 7.16.3 and 5.11 include a fix for CVE-2022-21699: Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine.
https://github.com/ipython/ipython/security/advisories/GHSA-pq7m-3gw7-gq5x

IPython 8.10.0 includes a fix for CVE-2023-24816: Versions prior to 8.10.0 are subject to a command injection vulnerability with very specific prerequisites. This vulnerability requires that the function 'IPython.utils.terminal.set_term_title' be called on Windows in a Python environment where ctypes is not available. The dependency on 'ctypes' in 'IPython.utils._process_win32' prevents the vulnerable code from ever being reached in the ipython binary. However, as a library that could be used by another tool 'set_term_title' could be called and hence introduce a vulnerability. If an attacker get untrusted input to an instance of this function they would be able to inject shell commands as current process and limited to the scope of the current process. As a workaround, users should ensure that any calls to the 'IPython.utils.terminal.set_term_title' function are done with trusted or filtered input.
https://github.com/ipython/ipython/security/advisories/GHSA-29gw-9793-fvw7

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Affected versions of the gunicorn package are vulnerable to HTTP Request/Response Smuggling due to improper validation of the Transfer-Encoding header that enables a TE.CL desynchronisation condition. Gunicorn’s HTTP parser does not consistently enforce RFC semantics when parsing conflicting or unsupported request framing—such as messages containing both Transfer-Encoding and Content-Length—so the backend may fall back to Content-Length while an intermediary treats the message as chunked.

Gunicorn fails to properly validate Transfer-Encoding headers, leading to HTTP Request Smuggling (HRS) vulnerabilities. By crafting requests with conflicting Transfer-Encoding headers, attackers can bypass security restrictions and access restricted endpoints. This issue is due to Gunicorn's handling of Transfer-Encoding headers, where it incorrectly processes requests with multiple, conflicting Transfer-Encoding headers, treating them as chunked regardless of the final encoding specified. This vulnerability allows for a range of attacks including cache poisoning, session manipulation, and data exposure.

A time-based vulnerability in Gunicorn affected versions allows an attacker to disrupt service by manipulating the system clock, causing premature worker timeouts and potential denial-of-service (DoS) conditions. The issue stems from the use of time.time() in the worker timeout logic, which can be exploited if an attacker gains the ability to change the system time.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of Requests are vulnerable to proxy credential leakage. When redirected to an HTTPS endpoint, the Proxy-Authorization header is forwarded to the destination server due to the use of rebuild_proxies to reattach the header. This may allow a malicious actor to exfiltrate sensitive information.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Sentry-sdk 1.14.0 includes a fix for CVE-2023-28117: When using the Django integration of versions prior to 1.14.0 of the Sentry SDK in a specific configuration it is possible to leak sensitive cookies values, including the session cookie to Sentry. These sensitive cookies could then be used by someone with access to your Sentry issues to impersonate or escalate their privileges within your application. In order for these sensitive values to be leaked, the Sentry SDK configuration must have 'sendDefaultPII' set to 'True'; one must use a custom name for either 'SESSION_COOKIE_NAME' or 'CSRF_COOKIE_NAME' in one's Django settings; and one must not be configured in one's organization or project settings to use Sentry's data scrubbing features to account for the custom cookie names. As of version 1.14.0, the Django integration of the 'sentry-sdk' will detect the custom cookie names based on one's Django settings and will remove the values from the payload before sending the data to Sentry. As a workaround, use the SDK's filtering mechanism to remove the cookies from the payload that is sent to Sentry. For error events, this can be done with the 'before_send' callback method and for performance related events (transactions) one can use the 'before_send_transaction' callback method. Those who want to handle filtering of these values on the server-side can also use Sentry's advanced data scrubbing feature to account for the custom cookie names. Look for the '$http.cookies', '$http.headers', '$request.cookies', or '$request.headers' fields to target with a scrubbing rule.
https://github.com/getsentry/sentry-python/security/advisories/GHSA-29pr-6jr8-q5jm

Sentry-sdk 1.4.1 includes a fix for a Race Condition vulnerability.
https://github.com/getsentry/sentry-python/pull/1203

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

A SQL Injection issue in the SQL Panel in Jazzband Django Debug Toolbar before 1.11.1, 2.x before 2.2.1, and 3.x before 3.2.1 allows attackers to execute SQL statements by changing the raw_sql input field of the SQL explain, analyze, or select form. See CVE-2021-30459.

Affected versions of the package djangorestframework are vulnerable to Cross-site Scripting (XSS) via the break_long_headers template filter due to improper input sanitization before splitting and joining with <br> tags.

A flaw was found in Django REST Framework versions before 3.12.0 and before 3.11.2. When using the browseable API viewer, Django REST Framework fails to properly escape certain strings that can come from user input. This allows a user who can control those strings to inject malicious <script> tags, leading to a cross-site-scripting (XSS) vulnerability.

Affected versions of the social-auth-app-django package are vulnerable to Authentication Bypass due to unintended email-based account association during the authentication pipeline. In social_django.storage.create_user (invoked by social_core.pipeline.user.create_user), an IntegrityError during user creation triggers a fallback that returns an existing User looked up by e-mail, effectively performing social_core.pipeline.social_auth.associate_by_email even when that step is disabled.

Python Social Auth is a social authentication/registration mechanism. Prior to version 5.4.1, due to default case-insensitive collation in MySQL or MariaDB databases, third-party authentication user IDs are not case-sensitive and could cause different IDs to match. This issue has been addressed by a fix released in version 5.4.1. An immediate workaround would be to change collation of the affected field. See CVE-2024-32879.

Rsa 4.7 includes a fix for CVE-2020-25658: It was found that python-rsa is vulnerable to Bleichenbacher timing attacks. An attacker can use this flaw via the RSA decryption API to decrypt parts of the cipher text encrypted with RSA.

Rsa 4.3 includes a fix for CVE-2020-13757: Python-RSA before 4.3 ignores leading '\0' bytes during decryption of ciphertext. This could conceivably have a security-relevant impact, e.g., by helping an attacker to infer that an application uses Python-RSA, or if the length of accepted ciphertext affects application behavior (such as by causing excessive memory allocation).

Affected versions of Idna are vulnerable to Denial Of Service via the idna.encode(), where a specially crafted argument could lead to significant resource consumption. In version 3.7, this function has been updated to reject such inputs efficiently, minimizing resource use. A practical workaround involves enforcing a maximum domain name length of 253 characters before encoding, as the vulnerability is triggered by unusually large inputs that normal operations wouldn't encounter.

Kombu 5.2.1 updates Amazon sqs dependency 'urllib3' minimum version to 1.26.7 to include security fixes.
https://github.com/celery/kombu/commit/f3b04558fa0df4ecc383c93e0b3b300d95e17c47

PyJWT 2.4.0 includes a fix for CVE-2022-29217: An attacker submitting the JWT token can choose the used signing algorithm. The PyJWT library requires that the application chooses what algorithms are supported. The application can specify 'jwt.algorithms.get_default_algorithms()' to get support for all algorithms, or specify a single algorithm. The issue is not that big as 'algorithms=jwt.algorithms.get_default_algorithms()' has to be used. As a workaround, always be explicit with the algorithms that are accepted and expected when decoding.

Pillow 9.0.0 ensures JpegImagePlugin stops at the end of a truncated file to avoid Denial of Service attacks.
https://github.com/python-pillow/Pillow/pull/5921
https://github.com/advisories/GHSA-4fx9-vc88-q2xc

An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the number of input layers relative to the size of the data block. This could lead to a DoS on Image.open prior to Image.load.

Pillow 8.1.1 includes a fix for CVE-2021-27921: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for a BLP container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the user-supplied stride value is trusted for buffer calculations.

In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0, there are multiple out-of-bounds reads via a crafted JP2 file.

Pillow 8.1.1 includes a fix for CVE-2021-25290: In TiffDecode.c, there is a negative-offset memcpy with an invalid size.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-25293: There is an out-of-bounds read in SGIRleDecode.c.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 10.0.1 updates its C dependency 'libwebp' to 1.3.2 to include a fix for a high-risk vulnerability.
https://pillow.readthedocs.io/en/stable/releasenotes/10.0.1.html

Pillow 9.0.0 excludes carriage return in PDF regex to help prevent ReDoS.
https://github.com/python-pillow/Pillow/pull/5912
https://github.com/python-pillow/Pillow/commit/43b800d933c996226e4d7df00c33fcbe46d97363

Pillow before 9.0.1 allows attackers to delete files because spaces in temporary pathnames are mishandled.

Pillow 8.1.1 includes a fix for CVE-2021-25292: The PDF parser allows a regular expression DoS (ReDoS) attack via a crafted PDF file because of a catastrophic backtracking regex.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.2.0 includes a fix for CVE-2021-25288: There is an out-of-bounds read in J2kDecode, in j2ku_gray_i.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

In Pillow before 7.1.0, there are two Buffer Overflows in libImaging/TiffDecode.c.

Pillow 8.1.1 includes a fix for CVE-2021-25291: In TiffDecode.c, there is an out-of-bounds read in TiffreadRGBATile via invalid tile boundaries.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow 8.1.1 includes a fix for CVE-2021-27922: Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICNS container, and thus an attempted memory allocation can be very large.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pillow version 8.2.0 includes a fix for CVE-2021-28678: For BLP data, BlpImagePlugin did not properly check that reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be run a large number of times on empty data.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28678-fix-blp-dos

In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a number of out-of-bounds reads exist in the parsing of SGI image files, a different issue than CVE-2020-5311.

Pillow before 7.1.0 has multiple out-of-bounds reads in libImaging/FliDecode.c.

Pillow 9.0.0 includes a fix for CVE-2022-22815: path_getbbox in path.c in Pillow before 9.0.0 improperly initializes ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow 9.0.1 includes a fix for CVE-2022-22817: PIL.ImageMath.eval in Pillow before 9.0.0 allows evaluation of arbitrary expressions, such as ones that use the Python exec method. A first patch was issued for version 9.0.0 but it did not prevent builtins available to lambda expressions.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.1.html#security

Pillow version 8.2.0 includes a fix for CVE-2021-28676: For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28676-fix-fli-dos

Pillow 8.2.0 includes a fix for CVE-2021-25287: There is an out-of-bounds read in J2kDecode, in j2ku_graya_la.
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-25287-cve-2021-25288-fix-oob-read-in-jpeg2kdecode

Pillow 9.0.0 includes a fix for CVE-2022-22816: path_getbbox in path.c in Pillow before 9.0.0 has a buffer over-read during initialization of ImagePath.Path.
https://pillow.readthedocs.io/en/stable/releasenotes/9.0.0.html#fixed-imagepath-path-array-handling

Pillow 8.3.0 includes a fix for CVE-2021-34552: Pillow through 8.2.0 and PIL (also known as Python Imaging Library) through 1.1.7 allow an attacker to pass controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.0.html#buffer-overflow
https://pillow.readthedocs.io/en/stable/releasenotes/index.html

Pillow 10.3.0 introduces a security update addressing CVE-2024-28219 by replacing certain functions with strncpy to prevent buffer overflow issues.

Pillow from 5.2.0 and before 8.3.2 is vulnerable to Regular Expression Denial of Service (ReDoS) via the getrgb function.
https://github.com/python-pillow/Pillow/commit/9e08eb8f78fdfd2f476e1b20b7cf38683754866b
https://pillow.readthedocs.io/en/stable/releasenotes/8.3.2.html

Pillow is affected by an arbitrary code execution vulnerability. If an attacker has control over the keys passed to the environment argument of PIL.ImageMath.eval(), they may be able to execute arbitrary code.
https://pillow.readthedocs.io/en/stable/releasenotes/10.2.0.html

Pillow 10.0.0 includes a fix for CVE-2023-44271: Denial of Service that uncontrollably allocates memory to process a given task, potentially causing a service to crash by having it run out of memory. This occurs for truetype in ImageFont when textlength in an ImageDraw instance operates on a long text argument.
https://github.com/python-pillow/Pillow/pull/7244

Pillow before 9.2.0 performs Improper Handling of Highly Compressed GIF Data (Data Amplification).

Pillow 8.1.0 fixes TIFF OOB Write error. CVE-2020-35654 #5175.

Pillow 8.1.0 includes a fix for SGI Decode buffer overrun. CVE-2020-35655 #5173.

Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICO container, and thus an attempted memory allocation can be very large.

Pillow is potentially vulnerable to DoS attacks through PIL.ImageFont.ImageFont.getmask(). A decompression bomb check has also been added to the affected function.

Pillow 8.0.1 updates 'FreeType' used in binary wheels to v2.10.4 to include a security fix.

In libImaging/PcxDecode.c in Pillow before 7.1.0, an out-of-bounds read can occur when reading PCX files where state->shuffle is instructed to read beyond state->buffer.

Pillow version 8.2.0 includes a fix for CVE-2021-28677: For EPS data, the readline implementation used in EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/MQHA5HAIBOYI3R6HDWCLAGFTIQP767FL/
https://github.com/python-pillow/Pillow/pull/5377
https://pillow.readthedocs.io/en/stable/releasenotes/8.2.0.html#cve-2021-28677-fix-eps-dos-on-open

Pillow 8.1.1 includes a fix for CVE-2021-25289: TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files because of certain interpretation conflicts with LibTIFF in RGBA mode. NOTE: this issue exists because of an incomplete fix for CVE-2020-35654.
https://pillow.readthedocs.io/en/stable/releasenotes/8.1.1.html

Pyyaml version 5.4 includes a fix for CVE-2020-14343: A vulnerability was discovered in the PyYAML library in versions before 5.4, where it is susceptible to arbitrary code execution when it processes untrusted YAML files through the full_load method or with the FullLoader loader. Applications that use the library to process untrusted input may be vulnerable to this flaw. This flaw allows an attacker to execute arbitrary code on the system by abusing the python/object/new constructor. This flaw is due to an incomplete fix for CVE-2020-1747.
https://bugzilla.redhat.com/show_bug.cgi?id=1860466

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in inventory.
https://github.com/sphinx-doc/sphinx/issues/8175
https://github.com/sphinx-doc/sphinx/commit/f7b872e673f9b359a61fd287a7338a28077840d2

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in docstring.
https://github.com/sphinx-doc/sphinx/issues/8172
https://github.com/sphinx-doc/sphinx/commit/f00e75278c5999f40b214d8934357fbf0e705417

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sqlparse 0.4.4 includes a fix for CVE-2023-30608: Parser contains a regular expression that is vulnerable to ReDOS (Regular Expression Denial of Service).
https://github.com/andialbrecht/sqlparse/security/advisories/GHSA-rrm6-wvj7-cwh2

Sqlparse 0.5.0 addresses a potential denial of service (DoS) vulnerability related to recursion errors in deeply nested SQL statements. To mitigate this issue, the update replaces recursion errors with a general SQLParseError, improving the resilience and stability of the parsing process.

urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0.

Urllib3 1.26.17 and 2.0.5 include a fix for CVE-2023-43804: Urllib3 doesn't treat the 'Cookie' HTTP header special or provide any helpers for managing cookies over HTTP, that is the responsibility of the user. However, it is possible for a user to specify a 'Cookie' header and unknowingly leak information via HTTP redirects to a different origin if that user doesn't disable redirects explicitly.
https://github.com/urllib3/urllib3/security/advisories/GHSA-v845-jxx5-vc9f

Urllib3 1.26.5 includes a fix for CVE-2021-33503: When provided with a URL containing many @ characters in the authority component, the authority regular expression exhibits catastrophic backtracking, causing a denial of service if a URL were passed as a parameter or redirected to via an HTTP redirect.
https://github.com/advisories/GHSA-q2q7-5pp4-w6pg

Urllib3 1.25.9 includes a fix for CVE-2020-26137: Urllib3 before 1.25.9 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of putrequest(). NOTE: this is similar to CVE-2020-26116.
https://github.com/python/cpython/issues/83784
https://github.com/urllib3/urllib3/pull/1800

Urllib3's ProxyManager ensures that the Proxy-Authorization header is correctly directed only to configured proxies. However, when HTTP requests bypass urllib3's proxy support, there's a risk of inadvertently setting the Proxy-Authorization header, which remains ineffective without a forwarding or tunneling proxy. Urllib3 does not recognize this header as carrying authentication data, failing to remove it during cross-origin redirects. While this scenario is uncommon and poses low risk to most users, urllib3 now proactively removes the Proxy-Authorization header during cross-origin redirects as a precautionary measure. Users are advised to utilize urllib3's proxy support or disable automatic redirects to handle the Proxy-Authorization header securely. Despite these precautions, urllib3 defaults to stripping the header to safeguard users who may inadvertently misconfigure requests.

Affected versions of urllib3 are vulnerable to an HTTP redirect handling vulnerability that fails to remove the HTTP request body when a POST changes to a GET via 301, 302, or 303 responses. This flaw can expose sensitive request data if the origin service is compromised and redirects to a malicious endpoint, though exploitability is low when no sensitive data is used. The vulnerability affects automatic redirect behavior. It is fixed in versions 1.26.18 and 2.0.7; update or disable redirects using redirects=False.
This vulnerability is specific to Python's urllib3 library.

Ipython versions 8.0.1, 7.31.1, 7.16.3 and 5.11 include a fix for CVE-2022-21699: Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine.
https://github.com/ipython/ipython/security/advisories/GHSA-pq7m-3gw7-gq5x

IPython 8.10.0 includes a fix for CVE-2023-24816: Versions prior to 8.10.0 are subject to a command injection vulnerability with very specific prerequisites. This vulnerability requires that the function 'IPython.utils.terminal.set_term_title' be called on Windows in a Python environment where ctypes is not available. The dependency on 'ctypes' in 'IPython.utils._process_win32' prevents the vulnerable code from ever being reached in the ipython binary. However, as a library that could be used by another tool 'set_term_title' could be called and hence introduce a vulnerability. If an attacker get untrusted input to an instance of this function they would be able to inject shell commands as current process and limited to the scope of the current process. As a workaround, users should ensure that any calls to the 'IPython.utils.terminal.set_term_title' function are done with trusted or filtered input.
https://github.com/ipython/ipython/security/advisories/GHSA-29gw-9793-fvw7

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Affected versions of the gunicorn package are vulnerable to HTTP Request/Response Smuggling due to improper validation of the Transfer-Encoding header that enables a TE.CL desynchronisation condition. Gunicorn’s HTTP parser does not consistently enforce RFC semantics when parsing conflicting or unsupported request framing—such as messages containing both Transfer-Encoding and Content-Length—so the backend may fall back to Content-Length while an intermediary treats the message as chunked.

Gunicorn fails to properly validate Transfer-Encoding headers, leading to HTTP Request Smuggling (HRS) vulnerabilities. By crafting requests with conflicting Transfer-Encoding headers, attackers can bypass security restrictions and access restricted endpoints. This issue is due to Gunicorn's handling of Transfer-Encoding headers, where it incorrectly processes requests with multiple, conflicting Transfer-Encoding headers, treating them as chunked regardless of the final encoding specified. This vulnerability allows for a range of attacks including cache poisoning, session manipulation, and data exposure.

A time-based vulnerability in Gunicorn affected versions allows an attacker to disrupt service by manipulating the system clock, causing premature worker timeouts and potential denial-of-service (DoS) conditions. The issue stems from the use of time.time() in the worker timeout logic, which can be exploited if an attacker gains the ability to change the system time.

Affected versions of Requests, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. Requests 2.32.0 fixes the issue, but versions 2.32.0 and 2.32.1 were yanked due to conflicts with CVE-2024-35195 mitigation.

Requests is an HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

Affected versions of Requests are vulnerable to proxy credential leakage. When redirected to an HTTPS endpoint, the Proxy-Authorization header is forwarded to the destination server due to the use of rebuild_proxies to reattach the header. This may allow a malicious actor to exfiltrate sensitive information.

Affected versions of Sentry's Python SDK are vulnerable to unintentional exposure of environment variables to subprocesses despite the env={} setting. In Python's 'subprocess' calls, all environment variables are passed to subprocesses by default. However, if you specifically do not want them to be passed to subprocesses, you may use 'env' argument in 'subprocess' calls. Due to the bug in Sentry SDK, with the Stdlib integration enabled (which is enabled by default), this expectation is not fulfilled, and all environment variables are being passed to subprocesses instead. 
As a workaround, and if passing environment variables to child processes poses a security risk for you, you can disable all default integrations.

Sentry-sdk 1.14.0 includes a fix for CVE-2023-28117: When using the Django integration of versions prior to 1.14.0 of the Sentry SDK in a specific configuration it is possible to leak sensitive cookies values, including the session cookie to Sentry. These sensitive cookies could then be used by someone with access to your Sentry issues to impersonate or escalate their privileges within your application. In order for these sensitive values to be leaked, the Sentry SDK configuration must have 'sendDefaultPII' set to 'True'; one must use a custom name for either 'SESSION_COOKIE_NAME' or 'CSRF_COOKIE_NAME' in one's Django settings; and one must not be configured in one's organization or project settings to use Sentry's data scrubbing features to account for the custom cookie names. As of version 1.14.0, the Django integration of the 'sentry-sdk' will detect the custom cookie names based on one's Django settings and will remove the values from the payload before sending the data to Sentry. As a workaround, use the SDK's filtering mechanism to remove the cookies from the payload that is sent to Sentry. For error events, this can be done with the 'before_send' callback method and for performance related events (transactions) one can use the 'before_send_transaction' callback method. Those who want to handle filtering of these values on the server-side can also use Sentry's advanced data scrubbing feature to account for the custom cookie names. Look for the '$http.cookies', '$http.headers', '$request.cookies', or '$request.headers' fields to target with a scrubbing rule.
https://github.com/getsentry/sentry-python/security/advisories/GHSA-29pr-6jr8-q5jm

Sentry-sdk 1.4.1 includes a fix for a Race Condition vulnerability.
https://github.com/getsentry/sentry-python/pull/1203

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

Django-filter 2.4.0 includes a fix for CVE-2020-15225: In django-filter before version 2.4.0, automatically generated 'NumberFilter' instances, whose value was later converted to an integer, were subject to potential DoS from maliciously input using exponential format with sufficiently large exponents. Version 2.4.0+ applies a 'MaxValueValidator' with a a default 'limit_value' of 1e50 to the form field used by 'NumberFilter' instances. In addition, 'NumberFilter' implements the new 'get_max_validator()' which should return a configured validator instance to customise the limit, or else 'None' to disable the additional validation. Users may manually apply an equivalent validator if they are not able to upgrade.
https://github.com/carltongibson/django-filter/security/advisories/GHSA-x7gm-rfgv-w973

A SQL Injection issue in the SQL Panel in Jazzband Django Debug Toolbar before 1.11.1, 2.x before 2.2.1, and 3.x before 3.2.1 allows attackers to execute SQL statements by changing the raw_sql input field of the SQL explain, analyze, or select form. See CVE-2021-30459.

Affected versions of the package djangorestframework are vulnerable to Cross-site Scripting (XSS) via the break_long_headers template filter due to improper input sanitization before splitting and joining with <br> tags.

A flaw was found in Django REST Framework versions before 3.12.0 and before 3.11.2. When using the browseable API viewer, Django REST Framework fails to properly escape certain strings that can come from user input. This allows a user who can control those strings to inject malicious <script> tags, leading to a cross-site-scripting (XSS) vulnerability.

Affected versions of the social-auth-app-django package are vulnerable to Authentication Bypass due to unintended email-based account association during the authentication pipeline. In social_django.storage.create_user (invoked by social_core.pipeline.user.create_user), an IntegrityError during user creation triggers a fallback that returns an existing User looked up by e-mail, effectively performing social_core.pipeline.social_auth.associate_by_email even when that step is disabled.

Python Social Auth is a social authentication/registration mechanism. Prior to version 5.4.1, due to default case-insensitive collation in MySQL or MariaDB databases, third-party authentication user IDs are not case-sensitive and could cause different IDs to match. This issue has been addressed by a fix released in version 5.4.1. An immediate workaround would be to change collation of the affected field. See CVE-2024-32879.

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in inventory.
https://github.com/sphinx-doc/sphinx/issues/8175
https://github.com/sphinx-doc/sphinx/commit/f7b872e673f9b359a61fd287a7338a28077840d2

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in docstring.
https://github.com/sphinx-doc/sphinx/issues/8172
https://github.com/sphinx-doc/sphinx/commit/f00e75278c5999f40b214d8934357fbf0e705417

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Ipython versions 8.0.1, 7.31.1, 7.16.3 and 5.11 include a fix for CVE-2022-21699: Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine.
https://github.com/ipython/ipython/security/advisories/GHSA-pq7m-3gw7-gq5x

IPython 8.10.0 includes a fix for CVE-2023-24816: Versions prior to 8.10.0 are subject to a command injection vulnerability with very specific prerequisites. This vulnerability requires that the function 'IPython.utils.terminal.set_term_title' be called on Windows in a Python environment where ctypes is not available. The dependency on 'ctypes' in 'IPython.utils._process_win32' prevents the vulnerable code from ever being reached in the ipython binary. However, as a library that could be used by another tool 'set_term_title' could be called and hence introduce a vulnerability. If an attacker get untrusted input to an instance of this function they would be able to inject shell commands as current process and limited to the scope of the current process. As a workaround, users should ensure that any calls to the 'IPython.utils.terminal.set_term_title' function are done with trusted or filtered input.
https://github.com/ipython/ipython/security/advisories/GHSA-29gw-9793-fvw7

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in inventory.
https://github.com/sphinx-doc/sphinx/issues/8175
https://github.com/sphinx-doc/sphinx/commit/f7b872e673f9b359a61fd287a7338a28077840d2

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in docstring.
https://github.com/sphinx-doc/sphinx/issues/8172
https://github.com/sphinx-doc/sphinx/commit/f00e75278c5999f40b214d8934357fbf0e705417

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in inventory.
https://github.com/sphinx-doc/sphinx/issues/8175
https://github.com/sphinx-doc/sphinx/commit/f7b872e673f9b359a61fd287a7338a28077840d2

Sphinx 3.3.0 includes a fix for a ReDoS vulnerability in docstring.
https://github.com/sphinx-doc/sphinx/issues/8172
https://github.com/sphinx-doc/sphinx/commit/f00e75278c5999f40b214d8934357fbf0e705417

Sphinx 3.0.4 updates jQuery version from 3.4.1 to 3.5.1 for security reasons.

Ipython versions 8.0.1, 7.31.1, 7.16.3 and 5.11 include a fix for CVE-2022-21699: Affected versions are subject to an arbitrary code execution vulnerability achieved by not properly managing cross user temporary files. This vulnerability allows one user to run code as another on the same machine.
https://github.com/ipython/ipython/security/advisories/GHSA-pq7m-3gw7-gq5x

IPython 8.10.0 includes a fix for CVE-2023-24816: Versions prior to 8.10.0 are subject to a command injection vulnerability with very specific prerequisites. This vulnerability requires that the function 'IPython.utils.terminal.set_term_title' be called on Windows in a Python environment where ctypes is not available. The dependency on 'ctypes' in 'IPython.utils._process_win32' prevents the vulnerable code from ever being reached in the ipython binary. However, as a library that could be used by another tool 'set_term_title' could be called and hence introduce a vulnerability. If an attacker get untrusted input to an instance of this function they would be able to inject shell commands as current process and limited to the scope of the current process. As a workaround, users should ensure that any calls to the 'IPython.utils.terminal.set_term_title' function are done with trusted or filtered input.
https://github.com/ipython/ipython/security/advisories/GHSA-29gw-9793-fvw7

Werkzeug is a comprehensive WSGI web application library. The debugger in affected versions of Werkzeug can allow an attacker to execute code on a developer's machine under some circumstances. This requires the attacker to get the developer to interact with a domain and subdomain they control, and enter the debugger PIN, but if they are successful it allows access to the debugger even if it is only running on localhost. This also requires the attacker to guess a URL in the developer's application that will trigger the debugger.

Affected versions of Werkzeug are vulnerable to Path Traversal (CWE-22) on Windows systems running Python versions below 3.11. The safe_join() function failed to properly detect certain absolute paths on Windows, allowing attackers to potentially access files outside the intended directory. An attacker could craft special paths starting with "/" that bypass the directory restrictions on Windows systems. The vulnerability exists in the safe_join() function which relied solely on os.path.isabs() for path validation. This is exploitable on Windows systems by passing paths starting with "/" to safe_join(). To remediate, upgrade to the latest version which includes additional path validation checks. 
NOTE: This vulnerability specifically affects Windows systems running Python versions below 3.11 where ntpath.isabs() behavior differs.

Werkzeug 2.2.3 includes a fix for CVE-2023-23934: Browsers may allow "nameless" cookies that look like '=value' instead of 'key=value'. A vulnerable browser may allow a compromised application on an adjacent subdomain to exploit this to set a cookie like '=__Host-test=bad' for another subdomain. Werkzeug prior to 2.2.3 will parse the cookie '=__Host-test=bad' as __Host-test=bad'. If a Werkzeug application is running next to a vulnerable or malicious subdomain which sets such a cookie using a vulnerable browser, the Werkzeug application will see the bad cookie value but the valid cookie key.
https://github.com/pallets/werkzeug/security/advisories/GHSA-px8h-6qxv-m22q

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests.

Werkzeug 3.0.1 and 2.3.8 include a security fix: Slow multipart parsing for large parts potentially enabling DoS attacks.
https://github.com/pallets/werkzeug/commit/b1916c0c083e0be1c9d887ee2f3d696922bfc5c1

Affected versions of Werkzeug are potentially vulnerable to resource exhaustion when parsing file data in forms. Applications using 'werkzeug.formparser.MultiPartParser' to parse 'multipart/form-data' requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds.

Werkzeug 2.2.3 includes a fix for CVE-2023-25577: Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses 'request.data', 'request.form', 'request.files', or 'request.get_data(parse_form_data=False)', it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers.
https://github.com/pallets/werkzeug/security/advisories/GHSA-xg9f-g7g7-2323

Affected versions of django-stubs are potentially vulnerable to Security Misconfiguration. The inclusion of type stubs for deprecated and insecure password hashers (MD5PasswordHasher, SHA1PasswordHasher, and CryptPasswordHasher) may inadvertently encourage their use in Django applications. This can lead to the storage of user passwords using weak hashing algorithms, making them susceptible to brute-force attacks.